Jump to content

cody4359

Members
  • Posts

    1563
  • Joined

  • Last visited

Everything posted by cody4359

  1. I was going to order a set of Alcan's but I'm impatient. sdtrucksprings was a pain to order from online, so I tried general spring. had a tracking number 20 mins later and they arrive friday. I'll be going with a linear custom valved shock in hopes of improving ride hopefully I'll be satisfied and not have to get a more terrain specific setup Sent from my SM-G900V using Tapatalk
  2. my currie steering always snaps my swaybar quick disconnect lynch pin on the passenger side. hopefully you'll have better luck. I like the canopy, what's it off of? Sent from my SM-G900V using Tapatalk
  3. I pretty much use instagram for all my jeep picture needs. bit many people here put up good build pics whe ever I log in. trate Daniels has the best mj out there that I've seen, and it's a slick 4 seater setup that gets used and abused Sent from my SM-G900V using Tapatalk
  4. cody4359

    Sponsors?

    yep, I have always sponsored myself. it's called work and priorities. if I was a company owner, I'd buy a rig and showcase it myself since you'll get the look your after and know the quality of work, much like dirtbound and jcr have done. Sent from my SM-G900V using Tapatalk
  5. I'm in parkland, and my neighbors has a paint booth. I think he charged set89 1k or a little more for his mj. it was a budget paint job so there were 2 runs I think, but that painter now works at Boeing and he has a new guy doing the work now Sent from my SM-G900V using Tapatalk
  6. those look comfortable. I think wj seats are the best I've sat in, I'm getting a little tired of my big bolster seats, but don't want to give up my center console Sent from my SM-G900V using Tapatalk
  7. I used rust bullet when I did my floors 4 or 5 years ago, top and bottom. still looks new, I believe it has a 10 year guarntee to inhibit rust Sent from my SM-G900V using Tapatalk
  8. Looks like you have been putting alot of work into it Sent from my SM-G900V using Tapatalk
  9. I doubt many tie rods are meant to stay straight while being a battering ram on rocks, it looks like you have the teraflex? I liked that kit other than the increased turning radius. I have to currectlink from currie and have replaced the tie rod bar twice Sent from my SM-G900V using Tapatalk
  10. I love not having to see signatures on the mobile app, on the website I have the signatures turned off and it's made my viewing experince much better Sent from my SM-G900V using Tapatalk
  11. great explanation, thanks Sent from my SM-G900V using Tapatalk
  12. I don't understand how you modified your switches, but that extremely clean and badass! what the point of the extended idle? i could Google it.. Sent from my SM-G900V using Tapatalk
  13. makes sense. I'd like a little more sound from mine and have thought about one sub, I don't need alot so I might just get a self amplified bazooka tube if I ever get around to it. it's hard to give up the limited interior storage tho Sent from my SM-G900V using Tapatalk
  14. cody4359

    mj-curious?

    it's legal here in wa too. I like beer but tried a few bowls for the first time since high school. 4hr high I could get out of lol. then I made some brownies with cannaoil, munched on half a batch thru out the day nothing really happened. next morning I got up and had the other half for breakfast since I normally get piss tested but had some time off and didn't want to freeze them. big mistake, layed in bed out of my mind from 8am to 7pm...... I'm back to beer and red wine Sent from my SM-G900V using Tapatalk
  15. I think we're slowly turning into a 3rd world country, and that will fit right in Sent from my SM-G900V using Tapatalk
  16. the shelf or whatever you built to sit the subs on looks good, out of curriousity why not custom fit a box there? Sent from my SM-G900V using Tapatalk
  17. so for the harness diet, did you just remove the rear windows/locks all the way up to the connector under the dash or what did you do? mine is already swapped but wiring is a hack and I just got a entire harness to redo it Sent from my SM-G900V using Tapatalk
  18. sub'd for knowledge since mine is damn near apart right now Sent from my SM-G900V using Tapatalk
  19. I am no sparky, I despise eletrical work. is this a all stock jeep or 97+ swap? all I have to offer is make sure all your grounds are connected and start tracing your wires. I haven't used photo bucket in years, I just use Tapatalk wich is an app for my phone and it loads pics easily. Sent from my SM-G900V using Tapatalk
  20. coming along nicely, how'd your dakota tank skid work out? I've had that tank for a few years and have been planning on making a skid but never looked that hard Sent from my SM-G900V using Tapatalk
  21. looking good. it looks like you made the taillight buckets bolt in but hard to tell. they look good tho Sent from my SM-G900V using Tapatalk
  22. everybody has options, so you should go rub it on a tree or rock and see what happens. if I had an xj, depending on results, I'd opt for them. we have some tight trails around me and what I see them being used for is tree guards. if your worried about it, possibly you could make a stuffiness on the inside that mouth with a few bolts down low? Sent from my SM-G900V using Tapatalk
  23. I'm a firm believer in no seatbelts, the roof was on the headrest, I crawled out and went to work the next day butter that I just lifted it and it saw 1 dirt road lol. if your around WA, there is a guy parting out his 97+ swap and has a cab for 200 bucks I think Sent from my SM-G900V using Tapatalk
  24. Meh, it sucks when I click on a link and there are no pics but today the world relies on the internet to makes us smart that photo bucket is probly doing us a favor. Half of my build thread doesn't work now but I'm ok with that. I never got many comments anyways. i wouldn't be suprised if more places started making you pay to post pics Sent from my SM-G900V using Tapatalk
  25. Whe do you think you'll get so time running with the new coils? I've always been intrigued by progressive coils, tho these dual rate may not be that? I just watched the video on them and it seems the upper coils are compressed at ride height and basically used to keep tension in the bucket while flexed? Sent from my SM-G900V using Tapatalk
×
×
  • Create New...