Search the Community
Showing results for tags 'limited'.
Found 2 results
So first, lemme preface this by saying that i have always wanted to build a 97+ converted MJ, in fact i have spent a few years researching the swap and i finally had things lined up to do the swap, including 2001 XJ and an 89 MJ... But life happened and i had to relocated from Florida to Kansas. I had spent several months using a website the searches all of craigslist looking for something interesting to pick up when i came across this. It was 1,000 miles away in New Mexico, made the 26 hour drive in 30. A built Comanche that had been converted to the 99 XJ drivetrain with a 2001 XJ Limited interior. Literally my dream swap. I believe that the 99' is is the best year of the 4.0. So these are the specs the day i bought her: ****Motor**** - Freshly rebuilt 99 4.0 bore over .30 - Bored throttle body - High Volume Melling oil pump - Eddlebrock duel outlet header - High flow intake manifold - Brown Dog motor mounts - IranMan4x4 Brackets ****Drivetrain**** -AX15 5 speed with a new clutch - Np231 transfer case with Chevy HD widechain and gears - 6 pinion planetary ****Suspension**** - 6.5 inch lift - SOA in rear - Spartan lockers - 3.55 gears - 29 spline shafts - Terra Flex high steer - Rubicon Express lower arms - Adjustable Rough Country upper arms - Rubicon Express double sheer track bar - BDS Shocks ****Exterior**** - Loans Metal Products front bumper - Warn 9.5ti winch - 4 LED Pod lights - Bushwacker fender flares ****Interior**** - Interior from a 1999 XJ limited - Heated leather power adjustable seats from a 2001 XJ - Wood grain interior - Correct two window switch installed Some pictures from the day i bought her: Things I have done since having her: - Fox 2.0 shocks up front - Fox 2.0 Steering stabilizer - Rebuilt the winch by replacing the solenoids and cleaning and re-greasing the gears - Reqired the LED lights so they are not a fire hazard and work with the factory fog light switch - Installed a WJ Overland wooden steering wheel with radio controls - Installed IronMan4x4 steering box brace with sector shaft support - IronMan4x4 Steering box bracket / spacer - Rough Country Floor mats - Spooled up some synthetic winch line Here are some pictures of what i have done since having her: And this is what I am currently in the process of doing (I have the parts ready to install): - Installing my OR-Fab bumper and warn M8000-S winch with Rigid LED lights installed on the bumper (from my old 99 XJ) - Creating a new headboard with overhead speakers and the full length XJ limited overhead console - Installing the stock XJ Limited tweeters - Getting the steering wheel radio controls to work with a WJ clock spring Some of my long term plans: - Rear mounted winch - X-Max fender flares - Two tone gloss black and Rhino Line matte black - 4 link suspension - 4.7 stroker - Dana 44 front and rear - Creating a logic board to make my steering wheel radio controls be able to select between front or rear winch, then be able to winch out and in Thank you very much for viewing!! I hope it was worth your time and id love to hear some thoughts and ideas!
Picked this 2002 grand Cherokee up over a month ago to replace my wife’s totaled Compass. I’m just planing on fixing the little things that are wrong with it and update it with a more modern radio and just enjoy it . It’s at 166k. It’s a limited with quadradrive 4x4. It has the front and rear limited slips , skid plates , front and rear tow hooks , and my favorite part is that’s it’s a 4.0 .