Jump to content

**OFFICIAL MJ'S EARNING THEIR KEEP THREAD**


Recommended Posts

Posted

I had actually thought of cleanning up the 92 and getting it back on the road. Just had a leaking clutch master and a cooked CPS wire. Until I lightly tapped the Rocker making a joke, and put my foot clean through.

Posted

 this 35' douglas fir was down in a creek bed but still held up above the water by some debris. probably weighed 3 times the truck (or more) but with a roll and a spin ... viola ,  4 loads to the good. :)

11081338_10153140821860211_2699748135213

10253929_10153140822020211_3749933969071

Posted

chev 3/4 ton suburban with every other leaf removed from the pack, so 5 leaves in total.  it rides pretty good but for flex i'd like to take one leaf out. I'm leaving it in for now though as i often find things in the bush that need to be brought home  :)

  • 1 year later...
Posted

I used mine to haul this workbench I acquired from the free section of Craigslist. 9920e485fbf74c7293b3b58a1e36c3b3.jpg

 

 

1989 Jeep Comanche 4.0L 5 Speed 4x4 Long Bed

1991 Jeep Comanche 2.5L 5 speed Red Short Bed

  • 4 weeks later...
  • 9 months later...
  • 1 month later...
Posted

ujb3zgs4zwvifoulhpm6.jpg

It's been two months but picked this Jimmy up, running, driving, and perfectly legal for $250. It's cost me a bit more than that again in parts, but I've already put 3000 miles on it.

I think that's about as much weight as I want to pull without trailer brakes. It's definitely heavier than the MJ is itself.

  • 4 months later...
  • 4 weeks later...
Posted

Hauled some wood away this morning and manche was sitting pretty low lol was bottoming out on big bumps but did just fine otherwise! 05066384ddcbd84e8571094cedcc5b83.jpg

Sent from my LGMS210 using Tapatalk

Posted

gonna have to remove the tool box or find a slimmer one. took the high lift off the box and had 3" of tailgate behind the quad tirese63d8f571740c7a49e9874768895c63e.jpg

 

Sent from my SM-G900V using Tapatalk

 

 

 

 

Posted

For those of you who don't know. My setup in all following pictures.

 

Short bed, 4.0, ax-15, Hell Creek MT springs, chry 8.25 (3.55), HD load leveling sensatrack rear shocks. Rear proportioning valve removed

 

 

 

 

 

 

 

phone 502-816x460.jpg

 

Full pallet of weird X shaped pavers. Approx 2,100lbs Tires at max (50psi) Engine had plenty of power, brakes were ok. Took two loads.

 

 

 

 

 

 

192-816x612.jpg

 

A lot of concrete.

 

 

 

 

 

 

 

 

1405231377331-816x612.jpg

 

Neighbors Mower, duh. A light load.

 

 

 

 

 

 

IMG_20141104_155250-816x612.jpg

 

 

Ridiculously tall topper loaded top to bottom with my belongings, two cats, me, a kayak, and a 20ft aluminum bass boat. Hauled this mess from middle TN all the way to south FL. Truck struggled up Mt Eagle and ran hot at times, but otherwise ran flawlessly.

 

 

 

 

 

 

 

phone 547-816x460.jpg

 

Mo concrete.

 

 

 

 

 

 

 

 

 

113-816x459.jpg

 

Full pallet of mulch, i think. Weight . . . . . . . a lot.

 

 

 

 

 

 

 

 

 

IMG_20141230_124513-816x612.jpg

 

My cousin in the P seat + scrap metal. Maybe 1,000lbs?

 

 

 

 

 

 

 

 

IMG_20150106_123237-816x612.jpg

 

Wet sod. Fire ants natural habitat. :thumbsup:

Posted

Running yard waste to the dump last year...

IMG_0707.jpg

 

ps. Mind you this was BEFORE I put the tarp over it and strapped it down. Most fools around here don't cover their loads and the road leading to the landfill is a war zone of junk that escaped the truck bed...

Posted

It's earned its keep a few times now but today it hauled home some wood and my new to me engine stand. The stand is folded under the wood. 4d8ca054addc00ee0615fc19c6479438.jpg

Sent from my HTC U11 using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...