MiNi Beast

So have you tried to fire it up yet?

Umm interesting. I'd see a fuel injector plug as stated so double check you have those setup or spliced proper. Other connection looks to be the map sensor that would need to be updated for new throttle body. Should be a return line for fuel unless not... not sure about the needed mod for head as it should be plug and play. You have cps and iac to connect as well, distributor should be good with renix wiring. I'm lost though, why keep the renix setup? With that do you still have a knock sensor?

I'll just take your word for it.

Crown Automotive Part #: 83503593 shop around as can range from 30-120$. Junk yard one would work as well. Standred yoke to be had.

Flintstone edition! Nice.

I'm thinking a big washer would probably work eh..?

Up early awaiting jeep parts..is that weird? Pete going to hook me up with some leafs and they are much needed. So pick those up soon. And today the triple fan setup will be here so will get that installed and no more over heating. fans help you know.

To stiff of rails without creating sub frame between the rails. Just think about 2 sticks flexing parallel together. Time for cage perhaps Or you need more goop for the windshield surround.

Cps is always my guess

I didn't even use one when regeared my rear d60. May make it easier I reckon but I didn't use 😕

Fuel ballast is a small white 2 blade on the driver's fender in the engine bay. It's a resistor to save your fuel pump. Sometimes corroded and may need to be replace. Can be jumped for verification. Crank sensor retards the timing or something but it reads your flywheel and sends a signal to to spark when injector injects fuel. Timing is key to ensure it runs smoothly. Typically you will have a idle but under load it runs like crap when bad. Throttle position sensor controls the Throttle bodie so if not having a steady idle and or high idle, this can be a issue. You could explain 🤔 a bit more on what is going per say and we could get you closer perhaps but this be where I would start with you having good spark and fuel. Question being are you getting spark and fuel at the right time.. So double check your wires being right order. Might just be that simple. 🤔 No stupid questions here good sir. This is what the site is all about.

I love history. Well did revitalizing.

Yeah I'm concerned about my soa lift setup. Thinking 🤔 need bigger bags to ensure flex won't rip a bag out..

Check fuel ballast as well.

Cps or tps.

Designed for clearance for cat. Jeep engineering at its finest 👌

On the road again..

Sweetness. Glad you got it handled. Enjoy.

Awesome 👍. Welcome to the club 😁

Dude i was just discussing this idea with my buddy. I want to install a set of bags. Thanks, good bump. You have a link to that kit?

Now that's good old-fashioned way of being a polite considerate fellow 😉

Use that Google eye.

Called a broke down Chevy.

Your oil leak is not a emergency to me. Title your post as, "in need", "asap"...blah balah . Seperate topics for standred repairs and aftermarket repairs, major mods. Custom mods. Do we have the volume of people to justify though.? To many people posting elsewhere vs on the site. Get off instafart and discuss topics and builds here.

Short box. Nice topper to fix up and run for sure.