Red Mistress Posted February 19, 2021 Author Posted February 19, 2021 Once in lifetime snow in East TX. XJ lineup in my yard: And day later Comanche made it to check on camp house.
ghetdjc320 Posted February 19, 2021 Posted February 19, 2021 What exhaust is that you have on the MJ? Seems like the opening is larger than oem but maybe it’s just the pic.
Red Mistress Posted February 19, 2021 Author Posted February 19, 2021 Walker exhaust with oval dual wall stainless tip
89 MJ Posted February 19, 2021 Posted February 19, 2021 Golly, that's a pretty truck! And that 2 door XJ
neohic Posted February 19, 2021 Posted February 19, 2021 18 hours ago, Red Mistress said: It’d look good with a camper behind it. Such an amazing looking truck.
Torq_Shep Posted February 19, 2021 Posted February 19, 2021 15 hours ago, Red Mistress said: Once in lifetime snow in East TX. XJ lineup in my yard: And day later Comanche made it to check on camp house. It was quite cold =P
Limeyjeeper Posted February 20, 2021 Posted February 20, 2021 10 hours ago, Torq_Shep said: It was quite cold =P Yes some of us found out that running water lines down the outside of an uninsulated garage is a bad idea! They would never do that up North!!
Torq_Shep Posted February 20, 2021 Posted February 20, 2021 14 hours ago, Limeyjeeper said: Yes some of us found out that running water lines down the outside of an uninsulated garage is a bad idea! They would never do that up North!! Half of my lines froze. Everything is just running in the crawlspace and with no heat... Luckily I didn't burst any lines.
Red Mistress Posted March 9, 2021 Author Posted March 9, 2021 Think this shift handle is for Laredo? Will bling console area of Eliminator :) Nice rubbery texture.
Pete M Posted March 9, 2021 Posted March 9, 2021 oooo... a shifter handle that hasn't been ruined by someone else's sweaty hands...
fiatslug87 Posted March 9, 2021 Posted March 9, 2021 2 hours ago, Red Mistress said: Think this shift handle is for Laredo? My 89 Pioneer has that chrome trimmed shift handle.
Red Mistress Posted March 9, 2021 Author Posted March 9, 2021 18 hours ago, fiatslug87 said: My 89 Pioneer has that chrome trimmed shift handle. I figured chrome trim was Laredo, thanks for confirming could be other trim levels.
ghetdjc320 Posted March 9, 2021 Posted March 9, 2021 21 hours ago, Red Mistress said: Think this shift handle is for Laredo? Will bling console area of Eliminator :) Nice rubbery texture. I had a nice NOS handle but my dog decided it was a chew toy... the funny thing is, even after he chewed it all up it was still better than the original
Red Mistress Posted March 17, 2021 Author Posted March 17, 2021 Kinda boring but necessary parts. drivers door latch, have passenger which is easy find. correct gas cap with no retaining strap.
Red Mistress Posted May 10, 2021 Author Posted May 10, 2021 Many thanks for CC vendor making indicators that never were made.
ghetdjc320 Posted May 12, 2021 Posted May 12, 2021 On 5/11/2021 at 6:41 AM, Red Mistress said: Many thanks for CC vendor making indicators that never were made.
Red Mistress Posted September 10, 2021 Author Posted September 10, 2021 Not very much going on with MJ, trying to finish up my Daughter's 01 XJ 2 door. She's off at college with no wheels, so I lost my good helper. https://www.naxja.org/forum/showthread.php?t=1151762 MJ is about to hit 100K miles and has been trouble free. I do need replace fuel pump as check valve is bad and takes while to start up. Did grab window crank And not sure if MJ or XJ Chief 2 door gets NOS front skid. Not a single scratch so doesn't need trip to powdercoat. https://www.naxja.org/forum/showthread.php?t=1159090
oldmanche Posted September 11, 2021 Posted September 11, 2021 I thought I had a problem with my check valve on my '91 but it turned out to be the small o-ring on the pressure regulator
Red Mistress Posted September 27, 2021 Author Posted September 27, 2021 100,000 miles and lots more life left !
Red Mistress Posted January 27, 2022 Author Posted January 27, 2022 Been working on my Comanche dealer showroom prints / poster size: New clear acrylic for the original easy change silver frames. Prints with holes require a special plastic frame and acrylic takes hours to dremel the holes to fit.
Jesse J Posted January 28, 2022 Posted January 28, 2022 not trying to hijack but I can't see the pictures
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now