91Pioneer

So.... why did you replace the sensor? Did you know your old one was bad?

There's more to towing capacity than power and axles. Think cooling, braking, suspension etc.

The same thing happened to me recently. Just do this: http://amzn.to/1nGTz59 https://youtu.be/HaFcFNDck4w

For what it's worth, I used a 92-96 sender on my 91. It is actually just a single wire unit even though there is space for an extra wire and terminal (it's just plain missing). I used the wiring pigtail from the 92-96 XJ and crimped on a spade terminal to tie back into my factory 91 wiring. It may not be pretty but it works great and was a lot less than the $45 RockAuto wanted for an aftermarket sender (CDN w/shipping).

Update. I needed that lower spring which is for the left signal cancel, long story short I went to many auto parts stores and nobody had the Dorman part, it's pretty much an online only deal. I also hit up the junkyard that day and found a GM truck with the steering wheel off so I grabbed both springs very easily and it was free LOL :thumbsup:

Well I thought I should post an update. It turns out the sender was bad. The spring inside was not working so when pressure went up the spring did not properly move the little plunger back out which drops the pressure reading. I just replaced it with a junkyard one and it's working wonderfully now (I was too cheap to spend $45 on a brand new unit LOL), I don't have an actual oil pressure problem which is great :thumbsup:

That is such an incredibly sweet stock truck, it's a shame to see it get modified.

Ah man he must have ordered the Cherokee version :rotf:

Oh I'm sure they screwed something up, DIY that fluid change again or take it to a real shop before it's too late.

Meh, I'm not a fan of the look of it because I know it's not really factory (to an MJ). But then again I don't own any CDs either LOL My truck just has AM/FM radio and I'm good with that ;) My car (DD) has Internet radio (Slacker) and I can just tell it what song to play and it will play it :)

I hate when people permanently butcher MJ's but that is the best looking rear bumper bed cuts I've seen. That angle makes it look a little more like factory. Straight cuts just look so wrong.

Not sure if this was posted before, it was uploaded last month... https://youtu.be/kjvq35CWc5E

Re-bend your brake line away a bit and epoxy the hole in the bottle, cheap fix.

Loctite?

They look like they fit pretty good but they look terrible.

Well done!

Tell your friend to turn the phone sideways next time so we can actually see the truck. Vertical video always = fail.

Gogmorgo, if it's any help I will have a set (one side) of Spicer ball joints for sale soon. NIB.

Must be really high quality LOL

I saw this today regarding Moog ball joints on another forum I visit - http://www.myfordfreestyle.com/forums/viewtopic.php?p=49037#p49037 I dunno I'd say stick with the known good Spicer, they should last you a few decades so don't worry about going too high end and stay away from cheap ball joints.

Don't do it. http://amzn.to/1TLwBG9 only

I'm thinking about doing a video on DIY headliner fabric recover-ing...

Why do you guys buy replacement headliners? Just rip off the old saggy fabric, keep the board and recover it, it's cheaper and faster.

The tail lights are basically illegal. The light output for brakes are pointing out to the sides, not behind you. Big time fail if you go on the street. Also, your grille is upside down. MJ tail lights aren't that expensive and not hard to find on this forum, why did you go for the ugly Dakota tails?

OK I guess that was easy. These look like them: http://amzn.to/1T9FuKl