Gjeep Posted November 16, 2018 Posted November 16, 2018 A Street Comanche for sale about an hour from me. From the looks of it (and all the other cars, house, etc in the photo) it's been sitting for a good decade. Not bad though. https://sfbay.craigslist.org/eby/cto/d/ford-explorer-and-jeep/6748553974.html
Dzimm Posted November 16, 2018 Posted November 16, 2018 Somebody better go get it! If it weren't halfway across country I'd snag it.
Gjeep Posted November 17, 2018 Author Posted November 17, 2018 Hate to say it, but my guess is this one will end up at the pick n pull that's just down the street from where that truck is located...
Alexia Posted November 17, 2018 Posted November 17, 2018 If I was not heading on emergency to my parents' place I would be flying out to California right now.
Bonkers Posted November 19, 2018 Posted November 19, 2018 Estate Sale ended Saturday - did anyone snag it?
Goose_XJ88 Posted November 21, 2018 Posted November 21, 2018 It was still avalible last night when I contacted them. I asked for interior pics but never got anything. I wanted to try and verify it had a plaque on the dash and post the I do up with all the pictures. I can't buy it unfortunatly.
Motorhead X Posted November 30, 2018 Posted November 30, 2018 https://comancheclub.com/topic/16697-street-comanche/
Gjeep Posted December 1, 2018 Author Posted December 1, 2018 I spoke to the estate broker and apparently someone was coming by to look at it and very interested. No idea if that is true or not. They also don’t know the last time it started but believe it has been sitting for a good 5 years.
Shharks Posted December 2, 2018 Posted December 2, 2018 It is number 7 of 100, has tan interior which is thrashed. Has 109 miles on the odometer. Folks says it was fired up a few weeks ago. But they are set at 2500 for it. I was telling the estate folks that if you can't get this running. It is looks pretty beat up the rear bumper is jacked up which does nto allow the tail gate to drop completly down or open. Funny thing these street comanches were produced in California but walking up to it I noticed a faded dealer sticker on tail gate showing it was at New Mexico dealership. Hummmm. For the seller asking/demanding 2500 for it, I believe in the condition it is in and don't even know it will pass smog, I would think no more than 500 for it. The license plate showed it was registered up to 2017 so there are past registration fees if it passes smog.
JolietJEEP'84 Posted December 2, 2018 Posted December 2, 2018 Does it still have to pass smog it being as old as it is? We have something similar in Chicago, but cars older than 97 are excempt. Just wondering.
Gjeep Posted December 2, 2018 Author Posted December 2, 2018 It would have to pass smog in CA. I believe 1973 is the cut off.
JolietJEEP'84 Posted December 2, 2018 Posted December 2, 2018 Guess we just need to get it out of crazy Cali.
Motorhead X Posted December 2, 2018 Posted December 2, 2018 That thing is going to take a ton of work. Probably near a complete overhaul. I agree, no more than $500. No offence to the people in The Richmond area, but it is a less affluent section of the East Bay. I doubt it was given a lot of TLC and would think passing smog is the least of worries with this beast. The back fees could be paid and put it on Non-Op, then transfer can be done without a smog. Then it would need to be trailered, which might be a good idea anyway. Did they pop the hood for you? The more I look at the pics, the more unsure I am that I even like the body kit. Unless someone is thinking of Bonneville... Having a truck that bottoms out the body on a driveway could be real a bummer. As much as It would be great to save her, I wouldn’t get into this project without deep pockets and a solid game plan. Thanks for taking a look for us Shharks. I was wondering about it.
Pete M Posted December 2, 2018 Posted December 2, 2018 12 hours ago, Shharks said: but walking up to it I noticed a faded dealer sticker on tail gate showing it was at New Mexico dealership. Hummmm. I'd guess it was on a used car lot at one time.
bruceb Posted December 6, 2018 Posted December 6, 2018 Stopped and took a few pictures today. After looking it over it should not sell for more than $1000, not many straight panels at all, but they may find someone to pay the asking price of $2500.
Goose_XJ88 Posted December 13, 2018 Posted December 13, 2018 Thanks for taking pictures of it. I couldn't get the lady to send me pics for her life.
sammullins2@gmail.com Posted January 7, 2019 Posted January 7, 2019 Rescued street comanche #53 from farm in Ga. 77 yo was using as farm truck. Body is absolutely straight interior is trashed. Ground effects may be salvageable. If Can't sell may build thunder chief out of it. I've got 2 4x4 pioneers I could steal parts off
sammullins2@gmail.com Posted January 16, 2019 Posted January 16, 2019 I'll pay 4 street comanche ground effects. I'm missing pieces surrounding rear wheel wells both sides. I've got enough remnants 4 3D copies . Wanted 2 check here first. Rather give CC members money before. 404 461 8462 I might have hit the lotto with this truck. Father tried 2 give 2 me but I was thinking 87 base never seen anything like it.
Dzimm Posted January 17, 2019 Posted January 17, 2019 4 hours ago, sammullins2@gmail.com said: I'll pay 4 street comanche ground effects. I'm missing pieces surrounding rear wheel wells both sides. I've got enough remnants 4 3D copies . Wanted 2 check here first. Rather give CC members money before. 404 461 8462 I might have hit the lotto with this truck. Father tried 2 give 2 me but I was thinking 87 base never seen anything like it. 3D copies you say? You have the ability to 3D print the front air dam??
neohic Posted January 17, 2019 Posted January 17, 2019 If you find any, the'll be used. These are made of unobtainium at this point. They were inject molded for Archer Brothers Racing out of Duluth MN and then sold off to the dealership in CA that put together the 100 trucks. There were a small amount of NOS parts still sitting on shelves a few years ago... all except the one piece on the driver side right behind the cab. I picked up the last set they had. They sat around as I didn't know what to do with them but knew they couldn't sit around on a shelf anymore. Then a few months ago I sold what I had to the owner of #24 as he's doing a full restoration. Good luck with the search. It'll definitely be a tough one.
JPEX05 Posted June 22, 2019 Posted June 22, 2019 Sorry to revive an old thread, but I thought I would provide an update on this. This truck is now sitting in the Rancho Cordova, CA Pick N Pull. https://row52.com/Vehicle/Index/1JTMW6416HT067314
Manche757 Posted June 22, 2019 Posted June 22, 2019 If someone is willing to pull much of the tan interior and ship it. PLEASE PM ME!
Strokermjcomanche Posted June 22, 2019 Posted June 22, 2019 Someone please pull the grille / ground effects/badge . I will pay to have them shipped to me in ohio . Someone please get them !!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now