Jump to content

Jeep comanche trailer wiring harnesses


Recommended Posts

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

  • 1 month later...
  • 5 months later...
  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...
On 12/8/2021 at 3:47 PM, ghetdjc320 said:

Any ideas on this connector for my tail lights on my 91? Doesn’t seem to be what I’ve seen on here. 

465EBE91-33C0-4946-9F52-EE069F42A26A.jpeg

FFB68D46-5615-4A60-A860-D9E11FA5D5D3.jpeg

Interesting.  Can anyone else with a 91-92 MJ confirm that the taillight harness uses a different connector?

 

Hate to say it, but assuming that connector can't be sourced, one option would be to cut that connector out completely, then wire in the Cadillac style connector (either using short pigtail wires and butt connectors, or new terminals crimped on) and then using the readily available Cadillac style trailer wiring harness.  Kinda defeats the whole goal of not cutting the factory harness though.

Link to comment
Share on other sites

On 12/8/2021 at 3:47 PM, ghetdjc320 said:

Any ideas on this connector for my tail lights on my 91? Doesn’t seem to be what I’ve seen on here. 

465EBE91-33C0-4946-9F52-EE069F42A26A.jpeg

FFB68D46-5615-4A60-A860-D9E11FA5D5D3.jpeg

OK gents, here is an update.  I've done some searching and here is what I found:

Apparently 1993 Jeep Grand Cherokees (and maybe 94?) used this same plug (male and female) in the tail light wiring.  I looked on Rockauto and they have a trailer harness for a 93 GC (WVE brand, part 4T1062) that looks to have the same connectors.  Would this part number be a plug and play on a 91-92 Comanche?  No idea.  Maybe, maybe not, and at $65.99 that's a big gamble.  If they aren't plug and play, maybe the connectors could be re-pinned to work?  In any case, 1993 (maybe 94) Grands will be the vehicle to find in junkyards, to see if the connectors can be reused for a home brew plug and play trailer harness like the Cadillac connectors are now.

Screen Shot 2022-01-02 at 10.23.24 AM.png

Screen Shot 2022-01-02 at 10.23.05 AM.png

Link to comment
Share on other sites

20 hours ago, schardein said:

OK gents, here is an update.  I've done some searching and here is what I found:

Apparently 1993 Jeep Grand Cherokees (and maybe 94?) used this same plug (male and female) in the tail light wiring.  I looked on Rockauto and they have a trailer harness for a 93 GC (WVE brand, part 4T1062) that looks to have the same connectors.  Would this part number be a plug and play on a 91-92 Comanche?  No idea.  Maybe, maybe not, and at $65.99 that's a big gamble.  If they aren't plug and play, maybe the connectors could be re-pinned to work?  In any case, 1993 (maybe 94) Grands will be the vehicle to find in junkyards, to see if the connectors can be reused for a home brew plug and play trailer harness like the Cadillac connectors are now.

Screen Shot 2022-01-02 at 10.23.24 AM.png

Screen Shot 2022-01-02 at 10.23.05 AM.png

That is super helpful, thanks! I’ll check into that option

Link to comment
Share on other sites

  • 3 weeks later...
  • 4 weeks later...
  • 7 months later...
  • 3 weeks later...
10 hours ago, 88mjsally said:

I have another batch of these in the works that should be ready in the next couple weeks using the used connectors like before

reading the thread, consensus is these will fit MJ's 87-92 correct?  If it will fit my 91', put me down for one!

Link to comment
Share on other sites

14 minutes ago, CaptainPatchy said:

reading the thread, consensus is these will fit MJ's 87-92 correct?  If it will fit my 91', put me down for one!

If you have the old style plug then it’ll fit, all I’ve seen have that plus except for the one pic on here of a different plug

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share


×
×
  • Create New...