Jump to content

watchamakalit

Members
 View Profile  See their activity

  • Posts

    2048

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by watchamakalit

  1. watchamakalit
  2. watchamakalit
    General spring built a special spring that wasnt listed on the website for a long time. Its the military wraps. They are now listed on their website I believe.
  3. watchamakalit
    But Pete its Jeep parts.....
  4. watchamakalit
    I was concidering 33s then I started looking at mjs with 31s vs 33s. 31s fit the truck better.
  5. watchamakalit
    Patiently waiting for updates J trucks are the badasses of badassness.
  6. watchamakalit
  7. watchamakalit
    Yes please!!!!!
  8. watchamakalit
    What temp thermostat?
  9. watchamakalit
    Is that grade 8 all thread?
  10. watchamakalit
    AW4 isnt worth the work. Better trans to be had for alot less work. I looked into that years ago for the cj. Ended up with a torqueflite.
  11. watchamakalit
    Chevy droop shackles will give you a small lift so I would assume stock chevys would either maintain ride height or lower it. However there may be other issues with this route such as bolt or spring clearance.
  12. watchamakalit
    Even though I havent used the emporium still sad to see it closed. And still need to say thank you for your service to other jeepers. Now go put that truck together, since your gonna keep it.
  13. watchamakalit
    Disclaimer: I'm not an expert and am asking for my education. Would it benefit from some diagonals below the tire carrier to the outside braces? Or is that just unnessecary weight? Something like this.
  14. watchamakalit
    The dash lights are the only thing I haven't swapped to led. Mostly because I like to dim mine like other said. Curious to see if we can find a dimmable source.....
  15. watchamakalit
    Without the seal. Setup everything first. Seal goes on on final assembly.
  16. watchamakalit
    Leave it too the local grave digger to reserect another thread......
  17. watchamakalit
    Keep the slush box. Those old 904/727's are pretty stout. I know where there is a yard with good cores.....
  18. watchamakalit
    I have the door braces and mirrors. Just not sure where they bolt in or where to drill holes for the mirror.
  19. watchamakalit
    Yup
  20. watchamakalit
    Ugh. Ok. I am having a rough time finding someone that can find those measurements. I don't want to hack it like your po
  21. watchamakalit
    686 are beautiful pieces of machinery. For those that may not know. You can shoot 38 special (much cheaper and less recoil) out of a 357 magnum.
  22. watchamakalit
    I thought it was " jeeps don't break, they just present opportunities to upgrade"
  23. watchamakalit
    Its a decent project but not a bad as everyone instantly assumes. Take pictures and label things as you go and take notes of silly things you aren't sure you will remember.
  24. watchamakalit
    Unless you can repair it in the truck that will require the entire dash to come out. Probably easiest to just source a different dash and swap.
  25. watchamakalit
    Any chance you could get stone measurements for where your you're mirrors mount? And maybe a pic or two of where the interior door brace mounts? I have a set of tow mirrors in want to mount but haven't found good reference photos.
×
×
  • Create New...