eaglescout526

You’ll need to look at the FSM and dial in the potentiometers as specified. I factory rest all the modules so they operate at the minimum 30mph pulses. This practice just ensures the system works and engages. As far as setting it to lock on at the desired speed will require further dialing in of the pots. It’s one of those things where you can’t bolt in the regulator just yet until cruise has been finely tuned. It’s not the most fun part but it’s satisfying knowing you got your cruise dialed in. And also I send the regulators as factory reset because not all components may play nicely with the settings as I found the box IE ground could have resistance at the harness and can mess with the readings the regulator reads from the pulse generator. Fun stuff it is. Anywho this gets my seal of approval. Looks like my printed instructions were very comprehensive. I just remember. I keep this pic of the section that talks about the regulator in my phone.

Kinda is a special kind of club haha.

How much fun was that? Second Renix MJ to add that feature.

You need the actuator, the rod for the actuator and the wiring. That’s it. Our latches have the tab where the actuator rod sits into to unlock and lock the door.

I will be getting it together today.

Yes I have the reservoir and I’ve been making custom vac harnesses.

Yeah. Just more trying to get the carb set to where it will at least be a guaranteed fire up. Sounds wonky I know but I don’t think it’s bad at a cylinder to cause a leak and be running weird. But it could have easily gotten worse. I plan to take it all apart soon.

So I got the retainer on the power piston and it’s in place like it should be. I got it to run, now I had to get it to run right and I did this by adjusting the choke. Now I have a new issue where it acts like it’s getting too much gas when it’s being revved which is possibly is and contributes to my poor adjustment of the choke. Sadly the batteries I have died on me so I couldn’t do anymore testing and I think I got the car overheated too since it doesn’t have a working cooling system thanks to the head gasket being bad. But I’ll get this fixed before I tear the engine down for the head gasket repair.

Hoping folks will ask me to order them to keep demand there haha.

Anyone want to me to document this car? Its my sisters and I told her I could put in on CC to document what we have done but I figured I’d see if there is a general interest in the old “Z”‘s that would be interested in seeing what I’ll be doing to get the little car back on the road. Already put new tires on and it and it doesn’t have spark. Let me know if y’all want to see me document it or not.

*X1 -Y1 APA MONOTONE PAINT PACKAGE CBA BENCH SEAT - STRAIGHT BK CGX Head Restraints-Outboard Seating, RR CKA CARPETS - CLASS I SHORT PILE 8 - 12 OZ DDJ 5SPD MANUAL TRANS A881 (JA-41) ERB ENGINE - 4.0L I6 MPI GAS GAC ALL WINDOWS - TINTED GLASS GFD SLIDING RR WINDOW GSC MIRROR - RIGHT BLACK HAA AIR CONDITIONING - FRONT HCC HEATER W/UPR LEVEL VENTIL - TYPE II JAY Instrument Cluster w/Tach JFH TACHOMETER - MECH JGB Clock - Digital LAP FUEL ECONOMY SHIFT INDICATOR LIGHT LMA HALOGEN HEADLAMPS MBJ Bumper - Front, Black MDA FRT LICENSE PLATE ATTACH REQUIRED NAA ESA W/CATALYST (EXC CALIF SYSTEM) PA2 SILVER MET CLEAR CT PRIMARY PAINT - FA2 QA2 SILVER MET CLR CT SECONDARY PAINT - FA2 SBA POWER STEERING TBG SPARE TIRE - COMPACT TBL TIRE CARRIER - INSIDE WMC BASE WHEEL DRESS - UP (INCLS TRIM RING) Build date 10/21/86 Body code TL61 Sold by TYSONS JEEP INC VIENNA VA I don't know anything about this MJ. I was cleaning off my desk and found an old Geico insurance card on it and it has the VIN for this MJ. Has a date of 8/02/01. I don't even know where I got or found this card.

Fun odd fact, I cannot order the later XJ style fender liners, but the older ones are somewhat available, I think they might get discontinued soon unless the demand picks up.

Interesting…I wonder how well it will do. I know for my 2.5L XJ coupled with the 3.55 A35 out back, it is a dog and sometimes has some trouble revving with the carb but that might be because I have the carb adjusted for AC compensation.

Right part number, there’s 3 left.

Ehh. I’ll hang on to it then. Unless someone else at the time needs it. But I’ll have it when you need it.

Shoot me a PM. I am able to get the last relay, it’s located at a dealer in IL.

Dirt cheap if new ones aren’t under $25.

I see there’s one starter relay left as NOS for an auto trans. Not sure if it’s the same across the board for a SJ/CJ to an Eagle.

Dp you have the red "Comanche Outfitters" book from AMC? That shows everything we could get from the factory.

84-86 saw the Renault 2.1L diesel. Any later year is most likely a swap.

I’d take a couple! Wish hot wheels or hell even matchbox if they’re still a thing to actually make some of these. I know there’s some XJ ones out there I want to get.

Ok that’s pretty cool diecast from hot wheels.

*X1 TRIM STYLE X1 - CLOTH BENCH -SA Charcoal 172 Zone 72-Portland 1AA U.S. Dealer Retail 5AM Largo Tracking APA MONOTONE PAINT BAQ 61 AMP ALTERNATOR BCX Maint. Free Battery BGA POWER FRONT DISC/REAR DRUM BRAKES BJA STD DUTY FRT DISC BRAKES BKP 10X2.5 REAR DRUM BRAKES CBA STRAIGHT BACK BENCH SEAT CKA CARPETS - FLOOR AND CARGO AREA CSR PASSENGER ASSIST HANDLES CUM MINI FLOOR CONSOLE DBB ALL MANUAL TRANSMISSIONS DDQ 5-SPEED MANUAL TRANSMISSION DMM 3.07 REAR AXLE RATIO DRJ DANA 35 REAR AXLE EAA ALL ENGINES EAF ALL FUEL INJECTED ENGINES-GAS ERB ENGINE - 4.0L I6 MPI GAS GAC TINTED GLASS WINDOWS GBB TINTED WINDSHIELD GLASS GCB FRONT DOOR TINTED GLASS GEH FIXED DOOR VENT GLASS GNA REAR VIEW DAY/NIGHT MIRROR GRC ENTIRE FLEET KEY ALIKE (FREQ 7) GUB POWER MIRRORS-BASE HCD DO NOT USE - SEE HCA JAA INSTRUMENT PANEL JAZ DO NOT USE - SEE JP, KA CLASSES JBD BEZEL-I/PANEL CLUSTER - BRIGHT JCA 85 MPH PRIMARY SPEEDOMETER JJA CIGAR LIGHTER JKB MOPAR HOOD LOCK K2X STRIPE/BADGE/MOLDING/COLOR K3W STRIPE/BADGE/MOLDING/COLOR KKE LAF SEAT BELT ALERT-DRIVER SEAT ONLY LAP SHIFT INDICATOR WARNING LAMP LBC GLOVE BOX LAMP LCJ DOME/READING LAMP B-PILLAR LMA HALOGEN HEADLAMPS MB1 Black Front Bumper MBJ Black Bumper MDA Front License Plate Bracket MFG Body Color Headlamp Bezels MHA Black Windshield Moldings MMC Rear Solid Window MMG Belt Moldings MMK NAA Federal Emissions NBA LIGHT DUTY CYCLE NBK EVAP Control System NDA Catalytic Converter NF2 18.5 Gallon Fuel Tank PWB WHITE PRIMARY PAINT - HWB QWB WHITE SECONDARY PAINT - HWB RAA All Radio Equipped Vehicles RAC AM MTR Radio RCA Audio SBA Power Steering SCE Steering Wheel SFA Standard Duty Shock Absorbers SGA Rear Shock Absorbers TAA All Tires TAD HIGHWAY TREAD TBC Compact Spare Tire TBM Tire Carrier Winch TPF P205/75R15 BSW All Season Tires WJD 15X7.0 Styled Steel Wheels XBS Pickup Box XFA -35F Protection Anti-Freeze YAA Build To U.S. Mkt. Specifications YEP Manuf Statement of Origin YGE 5 Additional Gallons of Gas Z01 Rear Spring Group I Z1A GVW/Payload Rating Z58 Left Front Spring Group Viii Z77 Right Front Spring Group VII Build date 4/27/89 Body code TM61 Sold by PIONEER JEEP-EAGLE INC, HILLSBORO OR Those are some wild add ons from the 80's

*X4 -SA Charcoal 3LX AGJ APA MONOTONE PAINT PACKAGE CBA BENCH SEAT - STRAIGHT BK CGX Head Restraints-Outboard Seating, RR CKA CARPETS - CLASS I SHORT PILE 8 - 12 OZ DGW Transmission - 4-Spd. Automatic ERB ENGINE - 4.0L I6 MPI GAS GAC ALL WINDOWS - TINTED GLASS GFD SLIDING RR WINDOW GSC MIRROR - RIGHT BLACK JHA WINDSHIELD WIPERS - DELUXE JJA CIGAR LIGHTER - FRT COMP K60 BODY SIDE MOLDINGS - VINYL LMA HALOGEN HEADLAMPS MBJ Bumper - Front, Black NAA ESA W/CATALYST (EXC CALIF SYSTEM) PS4 QS4 RAB Radio - AM/FM SBA POWER STEERING SCE STRG WHL - EURO/SPORT TYPE SUA TILT STEERING COLUMN TBG SPARE TIRE - COMPACT WJN 15" ALUMINUM WHEELS Build date 6/19/88 Body code JM61 Sold by TIM PARKER CHRYSLER, HOT SPRINGS AR

*X1 -Y1 3LQ APA MONOTONE PAINT PACKAGE CBA BENCH SEAT - STRAIGHT BK CGX Head Restraints-Outboard Seating, RR CKA CARPETS - CLASS I SHORT PILE 8 - 12 OZ DDQ Transmission - 5-Speed Manual ERB ENGINE - 4.0L I6 MPI GAS GAC ALL WINDOWS - TINTED GLASS GFD SLIDING RR WINDOW GPB DUAL - O/S MIRR PKG - LOW MOUNT - CHROME HCC HEATER W/UPR LEVEL VENTIL - TYPE II JHA WINDSHIELD WIPERS - DELUXE JJA CIGAR LIGHTER - FRT COMP LAP FUEL ECONOMY SHIFT INDICATOR LIGHT LMA HALOGEN HEADLAMPS MBJ Bumper - Front, Black MDA FRT LICENSE PLATE ATTACH REQUIRED NAE EMISS CONTROL TESTING LABEL PXB QXB SBA POWER STEERING SUA TILT STEERING COLUMN TBB CONVENTIONAL SPARE TIRE WJN 15" ALUMINUM WHEELS Build date 1/13/87 Body code JL61 Sold by HUNTINGTON BEACH CHRYSLER DODGE, HUNTINGTON BEACH CA