Jump to content

A-man930

Members
 View Profile  See their activity

  • Posts

    1506

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by A-man930

  1. A-man930
    Labor of love. Nice work
  2. A-man930
    I have to keep reminding myself it's not a GAS pedal...
  3. A-man930
    Looks great! I'm betting the CAD made the fit up easier
  4. A-man930
    Yes. Gravity didn't allow me to mock those up.
  5. A-man930
    Mocked up the basics.
  6. A-man930
    I'm all but convinced I'm going to weld it. Thanks.
  7. A-man930
    Good point. There is a lot of reinforcing already:
  8. A-man930
    How much does the cab flex relative to the chassis? What are the consequences of bracing the back of the cab? I’ll start with the disclaimer that I am not building a proper roll cage – I’m approaching this as a “cab saver” that could probably save my life in a pinch. This means that there are compromises from structural “ideals” in the name of aesthetics. Here are my requirements: Minimal “verticals” to sit outboard of the body. Bed will be in the factory position (I am open to a < 1/2” adjustment rearward by slotting the bolt holes on the chassis side.) Bed will have a tonneau cover; no pass throughs into the bed. My solution for the rear is a lower support structure fabricated from .188” wall 2x1 rec tubing. This will sandwich between the cab and the bed and provide “perches” below the rear glass for the tubular cage. It will tie into my tube rockers and the top of the frame rails. What I can't decide is if I should I weld this structure to the back of the cab, or leave it freestanding. I'm prone to weld it, but should I worry about inducing some kind of stress elsewhere? In a "lean against a a tree" scenario, am I asking to bust the glass out? At full flex, will the welds to the rockers and the frame be stressed and crack?
  9. A-man930
    I've embraced the reality that moisture (and dirt) will almost always find it's way into places like this. Might as well reduce the weight, strengthen the part, and enhance the sexy factor with a dimple
  10. A-man930
    All the dimple dies. Always.
  11. A-man930
    Beautiful work. Congratulations.
  12. A-man930
    Glad to hear this is typical; I've been dreading chasing my tail trying to fix it.
  13. A-man930
    Air line?
  14. A-man930
    I'll be keeping this in mind. Nice work
  15. A-man930
    Is this intended to be a moisture barrier?
  16. A-man930
    Swap the tires around. Sounds like a tire issue.
  17. A-man930
    Column work is such a treat
  18. A-man930
    Coming up on a milestone! I've waffled back and forth on how much of the body to tackle at once - settled on spraying the whole cab and "chassis" all at once; inside and out, top and bottom. Before this can happen, I want to have all conceivable cutting and welding completed. All locations for sensors, wiring, mounting brackets, Etc. It's taking forever!
  19. A-man930
    Great to see an update. Such a cool build
  20. A-man930
    Had to do a double take; "What's a Cybertruck doing in this thread?!"
  21. A-man930
    I had a local body guy recommend I have the door seals I plan to use installed for door fit up before paint and body, but I can't figure out the reasoning behind that.
  22. A-man930
    I worked on one with a brake issue that turned out to be a failing master cylinder - unobtainium. Edit: I say that as my only reservation with those cars. There's odd parts here and there, being from Aussie land and all, but some are apparently impossible to find - likely the parts used for the LHD conversion.
  23. A-man930
    I love those GTOs. Severely underrated.
  24. A-man930
    Holes were cut. Decisions were made. Glad it'll be mostly out of sight when it's all back together.
  25. A-man930
    Finished up the heat shields on the downpipe this evening. Hoping the BBQ paint holds up 🤞
×
×
  • Create New...