HOrnbrod Posted September 27, 2013 Posted September 27, 2013 Thanks. Here's the original thread: http://comancheclub.com/topic/17134-mz-rotax-cafe-racer-project/
jpdriver1 Posted September 28, 2013 Posted September 28, 2013 using the factory wiring again with an after market harness, I added a cargo light to the light bar --- yeah I know a factory light would have been cooler, but the light bar would have blocked it. Still have the factory light though --
jpdriver1 Posted October 1, 2013 Posted October 1, 2013 hey junkie == let us know how the push bar install goes, I've got one too -- thanks to the Ca Highway Patrol ----
coyote kid Posted October 1, 2013 Posted October 1, 2013 installed cab lights and did a full led turn signal/brake light conversion and finished HID headlight conversion
dasbulliwagen Posted October 8, 2013 Posted October 8, 2013 Havent posted here in a while, but Ive got a few things for the MJ or future projects. Today, I got 3 TJ Canyon wheels for free, a few weeks ago, I bought a full set of new JK takeoff wheels and tires for $200 that will go on my truck as soon as I get a set of adapters, and a month before that I got a bunch of other Jk stuff for free, including front and rear bumpers, base model shocks set, Rubicon shocks set, and steering stabilizers. Ive been thinking about taking some of this stuff to an off road swap meet, but then again, you never know when you might need one of these peices. Almost forgot about the JK rear brake assemblies, calipers, rotors, mounts and backing plates that the Chrysler tech center gave away.
HOrnbrod Posted October 8, 2013 Posted October 8, 2013 Must be dealer take-offs. :yes: Last week I picked up a new front and rear JK bumper with the silver inserts and fog lights, a steering stabilizer, rear spare tire holder, and stock JK shocks from Rustys for $125. It's just a matter of time until the wife runs into something. :brows:
AeroNautical Posted October 8, 2013 Posted October 8, 2013 Over the last week, I: Ripped out my pukey and installed a 4wd ax15 231 combo ripped out the dana 35 and put in a 29 spline 8.25 converted to rear discs put in xj shackles to lower the SOA a bit Been quite the successful week.
Mountain Dude Posted October 23, 2013 Posted October 23, 2013 Did the body work on one of my MJ's over the last couple weeks Before Image Not Found Image Not Found Image Not Found After Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found Image Not Found
carnuck Posted October 27, 2013 Posted October 27, 2013 I'm going out soon to fix my floppy tilt column.
johnnyc Posted November 5, 2013 Posted November 5, 2013 Made a trip down to San Diego to see MJRemi. Got a very nice bed with tailgate and taillights, pair of Metric Ton leaf springs, and a pair of coil springs.
MancheKid86 Posted December 3, 2013 Posted December 3, 2013 started gutting one, part by part, and chasing electrical gremlins in the other, insured it today replacing the front D44 wheel bearings tomorrow
Comanchemodder Posted December 3, 2013 Posted December 3, 2013 Refreshed the under dash ground per cruisers DIY. Poof! My right side dash lights work!
deziped1 Posted December 16, 2013 Posted December 16, 2013 Replaced the old world steel wheels with some 2000 alloys I got a deal on. Updates the appearance some-what.
bottomline89 Posted January 28, 2014 Posted January 28, 2014 I'm going through the ax15 i got from a salvage yard. new seals and bearings and general inspection. Also... I know this isnt the place for questions but i can't find any info on a pigtail between a 96 xj dash and an mj rear harness.. Any info will help. Thanks in advance http://comancheclub.com/topic/41731-96-xj-wiring-help/
AMCJeepMJ Posted January 29, 2014 Posted January 29, 2014 Replaced the fuel filter and both engine mounts. I'm generally not happy with the replacement rubber mounts as now every vibration comes through the body in to the cab vs the old worn out ones. I'd hate to see what poly motor mounts are like!
jpdriver1 Posted January 29, 2014 Posted January 29, 2014 installed the new coverking seat covers --- check vendors section for info & pricing Image Not Found Image Not Found
jpdriver1 Posted January 31, 2014 Posted January 31, 2014 I posted the purchase info in the vendor's section --- the cover king rep gave his permission -- easier for me (not as busy hehehehe )
Spectormj Posted February 15, 2014 Posted February 15, 2014 drove it through a mud puddle and got pelted by a hay hauler on my way to brentwood
Blue88Comanche Posted February 15, 2014 Posted February 15, 2014 Finally got the Comanche home! Going to finish the wiring for the E-Locker and install speed bleeders on the brakes.
Spectormj Posted February 15, 2014 Posted February 15, 2014 started loading wood into the bed for a fire and gassed up my tank for 37 bucks
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now