what did you do to your MJ today?

[mm's mj]

Replaced the starter - pushed it way beyond my first notice of a problem and still got lucky enough to fix it at home instead of having it fail in some parking lot somewhere.

 

Was surprised to see a Mitsubishi label on the old piece. Sometimes I feel more like an archeologist when I work on the truck, just peeling back the layers of years of curious repairs and replacement work. It's never boring.

[TNT]

Cut out the top of my raised inner fenders and started reworking them for another inch of space. The cutoff wheel, torch and welder have been my main toys... Let's not forget the BFH thou. :brows:

 

:cheers:

[dfreeman616]

applied my 12" ComancheClub.com decal in the lower left of my rear window, and a Great Lakes 4x4 decal in the right side of the rear window :cheers:

[mvusse]

Added 2" lift blocks I had laying around to my XJ.

 

Before:

 

After:

 

I also replaced a bad front axle U joint yesterday and noticed the (1994) shaft itself is quite a bit thicker than my original (1987) MJ axles. Why would they redesign axles make them bigger and I assume stronger, if the weak point is the 5-260x U joints?

 

Inspected the rear brakes as well. Driver side needs a new adjuster, everything else is A-OK.

[Darren]

I didn't do anything to my jeep today but I might do something to it tomorrow.

 

go blazers f the rockets

[shelbyluvv]

I cut the drivers side firewall out of the 97 XJ and modified it to cover the stock holes in the MJs firewall. It came out looking factory. Now I can run the wiring.

[TNT]

I didn't do anything to my jeep today but I might do something to it tomorrow.

 

go blazers f the rockets

 

This was another wasted moment of my life I will never get back.

 

BLAZERS

 

SUCK!!!

[BPB]

talked about it at a bar

 

 

Quit wasting bandwidth and padding your post count with you stupid BS responses.... :thwak:

 

I noticed that your post count has been padded on this page of the thread just as much as mine. :dunno:

 

 

Oh yeah I just remembered that yesterday I thought about my jeep while making a sandwich

[JeepcoMJ]

talked about it at a bar

 

 

Quit wasting bandwidth and padding your post count with you stupid BS responses.... :thwak:

 

I noticed that your post count has been padded on this page of the thread just as much as mine. :dunno:

 

 

Oh yeah I just remembered that yesterday I thought about my jeep while making a sandwich

 

 

you, and goblazers, need to stop being immature dumbasses.

[Darren]

 

 

you, and goblazers, need to stop being immature dumbasses.

 

Speaking of dumbasses, I'm leaving in my MJ right now for Bens house to work on my Jeep.

[pilotblake]

Just received my comanche club swag in the mail...patiently waiting till quitting time to go home and install my new decals, with a cold beverage in my new CC coozie.

[smithe1811]

I installed a sunroof today, pics will be in my project thread.

[CWLONGSHOT]

I installed a sunroof today, pics will be in my project thread.

THIS IS ONE THING I WOULD LIKE TO DO DOWN THE ROAD.... I'll check out your pics!!

 

CW

[CWLONGSHOT]

I pulled the bed, dropped the gas tank and started cleaning up the frame.. LOTSA RUST is an understatement!!!

 

As always.. pics up shortly, in the build thread... :D

 

CW

[pilotblake]

CC Swag installed:

 

 

[JeepcoMJ]

successfully recovered my friend's cherokee...which easily weighs 1000 lbs more than my truck with the exo cage, winch, etc. on it. my tires were bald.

 

also, not so succesfully, attempted to recover a full size 90's bronco, which weighs 5800lbs.

 

the rescue truck was stupid and had bald tires, so he got stuck trying to get to the property we were at (friend's house near his field). go figure, it's a ford.

 

 

then on the way out, I got stuck...everyone was attempting to get the "rescue vehicle" un-stuck, so I figured I'd rock it out. I did, but it seems like it may have cost me an aw4.

 

 

so, looks like we may be able to chalk up an aw4 to my long list of blown transmissions :clapping:

 

the trans is draining now, I will be flushing it and putting lucas trans fluid in to see if I can get her to make it a while longer. was real doggy on the way out lol.

 

*shrug*

[comanche87]

i put my truck on the lift at work to make sure the bolts for the front diff were tight. i ended up snapping one of upper bolts that bolt it into the unibody. i was sooo pissed. but at least i had spare ones at maddzz1's house. had to borrow a car to go get it. yay!! I'm bout half way to having 4x4!!!!!!

[CWLONGSHOT]

Sanded, wirebrushed and rust bullet painted "most" of the frame. :D :D

 

 

 

CW

[offroader461]

cut holes in my hood and install new hood vents :cheers:

[skaterguy58]

Sanding rust out of floorboards till 1AM, that counts as today right?

[CWLONGSHOT]

I made my patch panels for the MJ frame and took off my rear shocks. I am altering the mount so I don't have to tip them at such a steep angle. (They work better straighter.)

 

CW

[offroader461]

here are my vents;

 

 

[CWLONGSHOT]

Looks GREAT!! I also like the Waggoneer nose!!

 

CW

[offroader461]

Looks GREAT!! I also like the Waggoneer nose!!

 

CW

 

 

Thx...i really need to take my bumper in to have it powdercoated!

[Red 1989 MJ]

I will replace the front brakes tonight. 8)

 

Any advices ?