shelbyluvv

You're the second one...

What you are trying to explain makes zero sense. I did a 97+ swap and you HAVE to run the wiring for the XJ lights and pump. Unless he butchered the harness, the wiring is there. It is all in the harness.

We're going to need pics. Something is not right. Either you have wheels with a LOT of back spacing or your mounts are bent. Take a wheel off and measure the back spacing and report back.

Sliders

The TPI L98 gives a better "shock and awe" factor than that the POS Edlebrock TBI. Hell it flows better also. I don't see the 55k either.

If those were a 5 star I'd be into them. The five lug with 6 blades just doesn't work for me. I guess it's a symmetry thing in my mind.

Ahhh, makes sense. I'll keep an eye out for them. Sent from my XT1254 using Tapatalk

Do you have a link Bo ?Text or call 914-260-8252 Call the dude selling them in New York and see if he'll work out a deal with you. Sent from my XT1254 using Tapatalk

Might be worth a call. That's how I got my NOS rear bumper. Sent from my XT1254 using Tapatalk

DIY your own lift or go with Zone Sent from my XT1254 using Tapatalk

He has 2015 Rubicon wheels and TIRES. THEY ARE 255/75r17 in stock form. He will need at least 4.5" of lift and trimming to run them.

Mine is put on the back burner also. House shopping and retiring from the Marines have made me start saving money.

Push the glass with your fingers.

Eliminators came with color matched grills Sent from my XT1254 using Tapatalk

Love my grill! Sent from my XT1254 using Tapatalk

It is public, Bureau of Land Management, and open to ride and play on. This is the same dune taken from the top. Our house is behind the hill. Less than 1/4 mile away! Sent from my XT1254 using Tapatalk

I love my back yard! Sent from my XT1254 using Tapatalk

I took my girl out for a little time together. Sent from my XT1254 using Tapatalk

Junkyards are full of ZJs. There are at least 15 in my local yard. Sent from my XT1254 using Tapatalk

My rocker is pushed up making the front gap look worse. Sent from my XT1254 using Tapatalk

Sad seeing Randy Travis sitting there. He will always be my favorite country music singer. Sent from my XT1254 using Tapatalk

Yes, frame and engine mounts are both factory ZJ V8 mounts. Sent from my XT1254 using Tapatalk

Stock 93 ZJ V8 mounts. I did make a 1" drop for hood clearance. If I cut a hole or get a cowl hood the engine would clear without the drops. Sent from my XT1254 using Tapatalk

No kidding!? Didn't check the classifieds did you? Krustyballer sells them also. Please beware, I designed these sliders. I had them make the front follow the tire not and not the body line. This makes them "look" wider in the front. These are Krustyballer's

Picked up a used old school JCR bumper. This is by far my favorite bumper design. Clean and functional. Sent from my XT1254 using Tapatalk