jdog

Selling Dealer: CHRIS NIKEL CHRYSLER JEEP DODGE Broken Arrow, OK

Selling Dealer: ROSENTHAL CHRY-JEEP Arlington, VA

Selling Dealer: LANCASTER JEEP Lancaster, CA

Selling Dealer: BUERGE CHRYSLER JEEP DODGE RAM West Los Angeles, CA

Selling Dealer: COUNTRY JEEP-EAGLE INC Bakersfield, CA

Selling Dealer: CHARLIE EAREHART INC Beckley, WV

Selling Dealer: ORCHARDS LM/AMC/JEEP/RENAULT Benton Harbor, MI

Selling Dealer: JIM WITT JEEP/EAGLE Lowell, MA

Selling Dealer: AIRWAYS MOTORS INC. Calgary, AB (CAN)

Selling Dealer: LEO PAYNE PONTIAC INC Lakewood, CO

Selling Dealer: OMSC - RTE DE LA GLANE107 Switzerland

thats pretty much how to do it, they sell a flush to do it

have you tried unhooking the glove box light? I would put a ohm meter on ohms with the fuse removed put one lead into a pink wire that goes to the lights and the other to ground, start unplugging and moving the harness and wathcing the meter, when you have infinite resistance you have found the problem. book shows that wire runs the glove box lamp, cargo lamp switch, dome lights and the floor lamps. door switches are just grounds

do you have a bed light?

this one?

I just tapped the rear and ran a nyloc nut and a bolt for the fronts

the starter relay is on the fender near the battery, it should have 4 terminals and like 5 wires on one terminal

Double check that all the connections are on the starter relay

does it crank?

Don't have one, you should have a cable from the battery to the starter relay

Betting that switch is bad

Top rod is for the ignition switch

For some reason I believe I've seen this somewhere

Congratulations

I can agree with you on that, this new stuff sucks or are reboots poorly performed. The 60s to the early 90s have some of the best shows. So if those are ancient what are black and white tvs or radio shows?