Strokermjcomanche

Are you filling the expansion tank ? It's supposed to be roughly half full. Making sure you have a good cap/expansion tank is another good idea as some are just a junk design. Drilling a small hole at the top of the thermostat allows air to escape .

https://www.ebay.com/itm/86-92-JEEP-COMANCHE-PICKUP-REG-CAB-CARPET-FULL-FLOOR/390386937837?fits=Model%3AComanche|Make%3AJeep&hash=item5ae4dfefed:g:0NwAAOSwqu9VOqmr

See how the boxed end are on opposite sides? If your brake pad number has a 477 in it it should look like this . Very easy to overlook...

You have the pads on the opposite side , in petes picture you can see where if you had the boxed in side at the top the pads and caliper would have nowhere to go.

There is also this for anyone in the future looking to reupholster their seat . It may be more or less than what the OP paid to have his done . https://www.google.com/shopping/product/17434435797009925603?q=raybuck+comanche+bench+seat&client=safari&sa=X&hl=en-us&biw=375&bih=559&tbs=vw:l,ss:44&prmd=sinv&prds=num:1,of:1,epd:10097231876498717381,paur:ClkAsKraX2aeC69ggq-_i-nTfE-Ind_Vv2X7w49hRI5915OEejBTrq_JplTZxFLVt8CSFN2xKNYx6VAlDKZPJPVwwM9hyekExmg355Zqwc_T0gv-bR-6BrrEoBIZAFPVH72iqZte6G7eGkrIIHteVWNQmApSlw,prmr:1,cs:1&ved=0ahUKEwi1xLbWpYvgAhUHMd8KHVxyAp8QgjYI3AI

I don't think there should be any sayings on the sticker , I think less is more . I think it's perfect Pete .

I don't know if this is an idea you were looking for, but how about sending (mailing ) a card around to members that want to sign the card ? I know it will take awhile , but it would be a lot more personalized .Everyone could write something about Don if they wanted . If everyone would post their zip code so the card could be sent in a logistical manner and it wouldn't take as much time to get to them .

My deepest condolences to the Hornbrook Family and friends . I and many others will definitely miss him , I always enjoyed our PMs , he was a great friend to talk Jeeps or anything else with . Rest in Piece Don

http://hubcapvault.com/product/15-fits-jeep-wrangler-style-replica-wheel-silver-machd-face-15x8/ they make these in several different finishes.

The seal is the same whether it's a slider or stationary window as long as they are factory windows

Not mine https://cleveland.craigslist.org/cto/d/grand-river-1986-amc-jeep-comanche/6795652617.html

I've recently had mine replaced , mine was a pilkinton brand and is still available. I can't comment if the mopar is available.

Do you have buckets or a bench ?

Those look familiar

This isn't Paradisemjs truck is it ?

I have Milwaukee / dewalt / Ridgid/ryobi , there is no trap . If you are using multiple tools you can have multiple batteries , chargers etc , because you have to charge all those batteries anyhow ...

No trap with Ridgid batteries , lifetime warranty . I can tell when they are going to be done charging/ lock them so somebody else can't use them (or if they steal them they are a paperweight) and their tools carry a lifetime warranty as well .

I think I know what's going on and should be able to help , got any pictures to show /confirm what wrong ?

Talking about these ?

Dorman 918-251 is the original style cooler . Or you can use a piece of steel line , lose the quick connect fitting and clamp the trans hose .

87 MJ 2.5 before and after pics , I already had the hoses/box /reservoir and used a pump/pulley from a 90 wrangler with a 4.2 , had to shim the pump to make the belt line up correctly.

No feedback ratings , it may be a scam . But if you pay in a way that you're guaranteed to get your money back , you gotta try . I have the milwaukee 1400lb version Impact and the 12.0 high demand battery or else I'd try too .

Yes

It's just a base model , no screen . I'm fine with using one of the rear view monitors that replace the rear view mirror if need be . I know the limited version came with with a camera ,but I'm getting conflicting results if I can install everything in a base model.