Strokermjcomanche

There's a couple nos ones on eBay now if youre still looking 45 bucks for the pair

Ok We can go with how many swb 86s have you seen ? The grill can be changed as can the emblems . The bed on the other hand would take quite a bit of work to to shorten to appear to be a sb

It doesn't have the italicized comanche emblems . Unless they were changed you can definitely rule out it's a 86 as yellaheep said .

I swapped in the 95 column along with everything else from the xj in my 89 mj . It's nice having the cruise but the airbag looks like it doesn't belong in the mj lol. I can send you some pics if you'd like .

You can buy a lower shaft seal kit at your local parts store for around 20 bucks. You don't have to even remove the box .But If you have any play or excessive wear on the shaft itself the repair isn't probably going to last long .

Do you have access to a air bleeder or a pressure bleeder ? I would try that next after you adjust the rears to eliminate that as a possible problem .

Did you bleed the all the brakes at the same time ? Right rear ,left rear , right front , left front? How did you go about eliminating the load sensing valve ? Are you using a different distribution valve?

There's one on eBay I'll get you a link a little later .

We had a neighbor that thought she owned everyones house in the neighborhood . We don't have an HOA . She would put complaints in anyones mailbox of what she didn't approve of their house. Needless to say someone in the neighborhood put 50 pink flamingos in her yard one night and put a stop to her holier than thou attitude.

I will be taking both trucks with me . One Is an 89 white mj and the other is my black truck that will be in the heritage museum . Where are you in Ohio? What are you taking ? Maybe we can meet up?

Only 87s came without them, and if a customer complained about fuel pump noise, there was a retrofit kit the dealer installed.

Just go to the gas station twice .

You're implying they all have them ?

The 87s I owned didn't . As cruiser posted it could be retrofitted with one if some one complained about the pump being loud.

No worries ftpierce . I had to learn that also .

87 didn't have the resistor . It started in 88 . There noisy, but how noisy ? I've heard mine for as long as it's been in the truck (5 years ?) but it functions well

Ok thanks for the explanation . But the sender itself would be helpful . It wouldn't have to be cut to fit the pump . He'd have to acquire the wiring though

When did I mention a inline pump ? Can't you reverse wires to make the sender read correctly ?

I have a lwb h.o. 23 gallon sender in "ok" shape if you need one

Jeepco he allready had an electronic fuel pump that failed . He mentioned it earlier in the post .

Yes but the pump would last longer being it's immersed in the fuel and it acts like like antifreeze for the pump.

Yeah I overlooked that , sorry . How about a fuel pressure regulator ?

Is the pump in the tank? If not Why not get a newer mj sender and put a factory pump in it and wire it up and call it a day ? just a thought

Mechanical fuel pumps aren't that common anymore. I know that the garbage ethanol fuels are hard on alot of fuel system parts . Buy a good name brand with a lifetime warranty so when it goes bad , atleast you don't have to buy another.