Jump to content

what did you do to your MJ today?


JeepcoMJ

Recommended Posts

Got the front of my lift in. Still have a bunch of adjustments to make and I still have to set rear pinionangle and burn the perches on. I am having fitmentissues with the rear control arm drop brackets braces. They are the RRO ones. They are keeping me from property reinstalling the trans crossmember whichneeds to be done in order to set my pinion angle correctly. My other issue is the rear driveshaft. My 4x4donor vehicle is an 86 long bed with the NP207. I had to order a driveshaft from a junkyard for a short bed. But a short bed never came with a 207 transfer case. It must be shorter than a 231 case because it's most likely that's what the shaft is from because with the pinion near correct angle the shaft wants to fall out. I still have the long bed shaft and I guess I'll get that one cut down and use it if I have to. And another thing I noticed, the sway bar when angled down all the way hits the lower tank on my radiator. I have longer links to put on but I'm a little worried about it popping my radiator if flexed too far. I'll repost this to the tech section to see what of any suggestions you guys might have. Here are a few picsIMG_20180818_153446698_HDR.jpg.18e742b55df9b53201f8f801ee1f390c.jpgIMG_20180818_110127673.jpg.87bb100f37aab166b137ea6aa1d70052.jpgIMG_20180818_110141260.jpg.69acbb31021eca20ddbc98c7285da1a7.jpgIMG_20180818_110221391.jpg.375c695ae3de9837aa3e977ba020e16e.jpgIMG_20180818_153435407.jpg.19351e332cb51f1f1d10235aa76f8819.jpg

Link to comment
Share on other sites

On 8/19/2018 at 11:59 PM, NHMJXJ said:

Tailgate lettering from JeepSticker.com ... Follow the enclosed instructions or suffer the bubbles.

 

BTW, same tailgate, just 15 minutes later and the sun was setting.

 

 

unletter.jpg

 

 

That color looks really familiar. 

 

 

 

On mine, today I cleaned the C101, relays, IAC, adjusted the TPS & TV cable.  And checked grounds/alternator.

 

Alternator is dying, yay. 

Link to comment
Share on other sites

Leather wrap steering wheel replaced the plain Jane model.
DDF6DECA-73B9-44E8-9054-E62C64A3AF1A.jpeg.a0b0fbda3e07b732ee08b9ea692ca1cb.jpeg
About 25yrs ago I was working in an aircooled VW restoration & hotrod shop.
We had a 75yr old guy that was a heroine addict who did all the interior work. He could custom wrap a steering wheel, and stitch it up in 30min flat. Made some amazing multi color custom wraps.
Link to comment
Share on other sites

9 minutes ago, GreasemonkeySC said:

About 25yrs ago I was working in an aircooled VW restoration & hotrod shop.
We had a 75yr old guy that was a heroine addict who did all the interior work. He could custom wrap a steering wheel, and stitch it up in 30min flat. Made some amazing multi color custom wraps.

 

th_Worthless.gif

Link to comment
Share on other sites

I literally finished 5min ago. I was installing my new to me So topper bed cover.
$500 used, and a 1 3\4hr drive to get it.
It's in excellent shape, and after I can see well enough to give it a few tweaks tomorrow, it will fit perfectly. I even hit the jackpot, and it's the correct color to match the Comanche.
BTW: it was from a 6ft bed Toyota Tacoma5c9c0ac27c712409a6596bdbe7ebf02d.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...