fiatslug87

Oddly enough the tan one is my neighbor's from across the street. She parked it in front of my house one day while soil was delivered on her driveway so I pulled the white one in front and took a picture. It's an '89 4WD, LWB, 4.0L, column shift automatic. I've been trying to buy it from her for 8 years, one day it will be mine!

Spencer at jeepsticker.com has this already, can he add the border, & Club.com and get it done? Image Not Found

I almost didn't recognize it without a dog inside. :rotf:

Powder coated about 7 years ago.

My condolences. Alive forever in your heart.

Took the dogs to the beach. Mmmm, Tacos Moreno. That's me next to the OPEN sign wearing the official Comanche Club hat.

Went from this To this Also did the drip moldings

There's a schrader valve on the fuel rail, remove the cap and press the stem.

http://www.comancheclub.com/forums/viewtopic.php?f=2&t=24008

Maybe this will help.

From what I remember, I only remove the pivot bolt, the 2 rear pump to bracket bolts (figure 47) and the two bolts to the left of the adjustment bolt (figure 46) and remove the PS pump and bracket as a unit, the C-bracket comes with it.

If you want new lines here are the parts from NAPA. 7151367 from cover to connector $21.99 7151366 from connector to air box $21.99 7151365 from cover to air box $8.69

I bought as set from this guy autographixdesign on eBay about two years ago but never installed them, he has a set for sale right now http://cgi.ebay.com/ebaymotors/MJ-JEEP- ... ccessories

Year, Model: 1990, Sportruck 4x2 Driveline: 4.0/AX15/D35/SWB Build date: October 3, 1989 (thanks dasbulliwagen) In-Service date: July 7, 1990 Selling Dealer: McLaughlin Ford Sales, Auburn, CA Location: S.F. Bay Area, CA Status: Driver Notes: Sliding rear window, AC Exterior: Spinnaker Blue Metallic (PB3) Interior: Tan, Vinyl Bench Seat (now wingback buckets), Vinyl flooring Current owner: Mike (fiatslug87), Original owner (purchased 7/7/1990)

Year, Model: 1989, Pioneer 4x2 Driveline: 4.0/AW4, floor shift/D44/LWB Build date: March 2, 1989 (thanks dasbulliwagen) In-Service date: March 16, 1989 Selling Dealer: Connell Chrysler Jeep Dodge, Oakland, CA Location: S.F. Bay Area, CA Status: Driver Notes: Sliding rear window Exterior: Colorado Red (PE4) Interior: Tan, Vinyl Bucket Seats (now wingback buckets), Carpet, '96 XJ Country wood trim Current owner: Mike (fiatslug87), 3rd owner (purchased 7/2004)

Year, Model: 1988, Pioneer 4x4 Driveline: 4.0/BA10(now AX15)/NP231/D30/D35/SWB Build date: January 4, 1988 (thanks dasbulliwagen) Selling Dealer: Victor Buick Pontiac GMC AMC Jeep Renault, Placerville, CA Location: S.F. Bay Area, CA Status: Driver Notes: Full skid plates, sliding rear window, AC Exterior: Pearl White (PWB) Interior: Cordovan, Cloth Bench Seat (now wingback buckets), Carpet Current owner: Mike (fiatslug87), 2nd owner (purchased 8/2006)

This particular pic is of my '89 Pioneer, but they're all the same.

Pete, did you make the diamond plate sill plate?

Remember, 90 and newer have different plugs than 89 and older.

I also like adding the heating duct that runs the length of the console, it will bring some heat to the back, a good place to warm your hand. The ashtray light wiring is there but most models didn't come with the light, also pickup the light for the cigar lighter (it lights up the green trim ring) and the kick panel lights if you don't already have them.

Congrats Mr. Sayre.

Just let me know when you're ready. And Spencer, count me in on the Pioneer stripes, even if they do end up hanging on the wall for 2+ years. :doh:

All three have stock rear bumpers. One has the original for sure the others I'm don't know. This one was powder coated about two years ago.