fiatslug87

Local boy wins the 100th Indy 500 as a rookie!! Congrats to Alexander Rossi from Nevada City CA. My wife called it! Now on to the CocaCola 600.

Number two on the list: https://www.hagerty.com/articles-videos/Articles/2016/05/20/secret-loves?utm_source=ExactTarget&utm_medium=email&utm_term=&utm_content=&utm_campaign=Hagerty%20Weekly%20News%205-25-2016

Maybe in chrome? :D

That's the door check, actually it's a broken door check. It bolts to the door and the arm that's missing attaches to the door frame using a bracket and roll pin. http://www.amazon.com/Dorman-924-148-Door-Check/dp/B00GHT6ZWU/ref=au_as_r?_encoding=UTF8&Make=Jeep%7C42&Model=Cherokee%7C347&Year=1990%7C1990&ie=UTF8&n=15684181&newVehicle=1&s=automotive&vehicleId=1&vehicleType=automotive http://www.amazon.com/Cherokee-Comanche-check-bracket-MOPAR/dp/B00LFW2Y10

Ferrari 458 Italia. Southbound Lopes Road Fairfield, CA, 5/24/2016 1:20 PM (sorry for the horrible pictures.)

Identical to the XJ. There were some differences in the buckle between the early years and later models.

Part of the headlight circuit, if the headlights are on, it is on.

Aren't we all? Congrats on the new addition.

You may enjoy this thread. http://comancheclub.com/topic/23217-exotic-car-spotters-thread/?fromsearch=1

What other opinion did you expect from us? :yes:

Most of my stuff is Spyderco. I use a diamond stone for plain edge knives but have never sharpened the SpyderEdge (serrated) ones.

This is where I measured, all three MJs were within 0.1" of the measurements I listed. BTW, I used my machinist's ruler, that's why the measurements are in tenths of an inch.

Leaking injectors, TPS not adjusted? Read the deceleration portion in this thread http://comancheclub.com/topic/50324-open-vs-closed-loop/

PM an email address and I'll send you manuals that explain it. From the JEEP 1991 Sequential Fuel Injection Manual:

On my 88, 89 and 90 the bottom edge is 7.3" up from the body line transition and the edge of the C is 1.45" in from the fender edge.

I have that one.............How about the auto trans and transfer case shift lever bezel lights? I know you don't have those. :)

Paint it with some engine paint.

Maybe for the cigarette lighter light?

have you tried this one? http://comancheclub.com/topic/49743-black-interior-trim-pieces-maine/ Edit: Never mind, now I see you already asked. :dunce:

Those speakers were XJ only, the MJ harness does not have provisions for them but they're easy to splice in.

HA! It's blue because the bulb gives off yellow light resulting in a green light matching the switches and heat control panel. If you use a white LED in any of them it will result in blue illumination.

Knee panel speakers?

Hey Don, nice table! From what I remember, just pulling the knee panel is all that's required.

It should be two wires, one black one orange with a connector that fits this:

That is NICE!!! It was a $120.93 option, PN 8982200689.