MiNi Beast

Good road trip. Problem free must be clean. . Nice bikes. Enjoy.

Great deal for those detailed builds.

Congrats.

Spring time fun, get er ready for some mud. Change some seals and add a speedy sleeve to give that seal a smooth surface. We shall see how long this holds up.

Enjoying the winter!

Very possible. Check for leaks as well, orings on injectors can be common. Basic fuel supply, pump_tank, filter, rail with injectors being regulated.

Sure does look purrdy.

Its all nuts and bolts.

Use a new seal from a 98 xj.

Oil filter adapter has a o-ring that's common to leak. Which appears to be leaking. And just cause oil pan has been done dosent mean the rms was done. And the valve cover can always be doubled checked for tightness as the rear bolts are known to loosen up.

Storage space is always nice to have.

Yeah I can dig this one. 👌

Well that's good...

Got home after the "blizzard" and found the neighbor had snowblowed my drive. He loves showing off his tractor setup. i tell him he dosent have to cause i have 4wd... which after firing the jeep right up, slightly impressed but i built it to do that so it should be expected right? so wanted to play for a few and so found that I was low on gas apparently as I ran out and was unable to get it to fire back up. had to yank it back off the hill the next day with the wj just to be able to get gas into it with out it spilling out the same hole i was filling it. thought I get a pic for the memory books, only to later find i was photo bombed.

Yes indeed good sir.

Same as 30*, she needs a little pump of the gas.. 🤣

Been here before. I used a grinder and cut the heads off and hammered out the bearing and install new bearing and bolt and antiseized both.

How long does it hold fuel pressure? Fuel filter easy to swap out at anytime. But check fuel pressure regulator at the rail as well.

Fires right up. Had a little fun in the snow. About time to get out and about for some snow wheeling me thinks.

About time you post your progress.

For real took long enough.. glad to see it used finally..I'm very jealous, enjoy good sir.

Should clean it up a bit with some of that there jbweld for aluminum...just for good measure 🤔 Truck is solid run it. I'm so jealous 😫

another good indicator of bad head gasket is, lack of power and missing coolant. Run it.