Pete M

worn in what way?

back on all 4 feet. New upper arms and new-to-her knuckles, unitbearings, lower balljoints, and shocks. and for some reason I seem to have gained an inch of height in the front. also finished all of the renegade flares. But I'm beat and running out of temperature and light so her bath will wait until tomorrow.

do not go faster than like 5mph and the MJ driver should have their foot on the brake so the rope is always tight. When making a stop, the towed rig should do most of the actual braking so the rope stays tight. fire up your phones and put them on speaker so you can be in constant contact. Bonus points if you do it late at night when there aren't other cars on the road. super bonus points if you ignore all that crazy nonsense and just call a tow truck.

I've won my battle with the upper bolts. I got lucky and the 2 drivers sides weren't fused to the bushings and so it merely required contortionist levels of tetris-ing to get them out. today's battle is swapping the pass side coil. don't know why the other side was so freaking easy.

does not apply to me I have to look for new vibrations.

for better or for worse it's literally the only option. ACC makes them and the rest are resellers. shop around to find the best price. when it comes to installing it, lay it out in the sun for a while to make it pliable. do not cut anything until you have it exactly where you want it. it takes some effort and patience, but will look good in the end.

that's a good looking truck! be sure to start a build thread to show off all you're doing

that's going to take a bit more the JB weld...

more lift will only help until you flex or hit a big bump. Seems to me like a notched pan and/or a custom trackbar would be the solution.

I think you're talking about the 1990 ECU upgrade. 1991 would be a completely different animal.

HellCreek used to be the only game in town, but the quality was very good and the owner was here on CC and would answer questions, etc. but then a couple years ago something changed... and the trucks getting the new leafs had the tire pushed forward in the wheelwell a noticable amount. In more than one truck. and I seem to remember that HC claimed that's how it was supposed to be and would travel back as weight was applied in the bed. But the tire looked... off the rest of the time.

last seen on ebay and located in Florida

the more I look at it, the more it looks like it's just a door leaning against the wall.

my 2wd might disagree

stop being so lazy!

now you have a spare shaft

indoor or outdoor? long term or just weekend use?

no pics of the wrapping? why didn't it work?

nice! I love a good cover. really cleans up the truck's lines (and hides your stuff!) I guess you don't really need that man door all winter?

what components do you have now? also, clean your lens. at least that's what I'm assuming is causing the fuzziness of the photos.

I don't feel I have enough of any one thing to call myself a hoarder. that's my story and I'm sticking to it.

explain

this might seem weird, but I'm not sure I remember the last time I touched my 3/8 ratchet set. power tools and the 1/2" ratchet or my tiny 1/4" ratchet always seem to be my go-to tools. huh.

so with the Liberty in pieces I've been driving the Cruiser lately, and that means no bluetooth and apparently that means a lot of Rolling Stones and the Doors.