holeski Posted July 8, 2015 Share Posted July 8, 2015 What I have noticed when looking for parts, mods and accessories for the Comanche is we are often overlooked. What would everyone like to see made for the MJ that's not produced by anyone or there is only one type of item that doesn't work for your needs? Link to comment Share on other sites More sharing options...
daking Posted July 10, 2015 Share Posted July 10, 2015 Fuel tank sending unit bed bar / roll bar real gas tank skid ( I have an original metal gas take skid plate already) Rock sliders, or side bars that can actually hold weight Aftermarket Transmission controller rear axle brake leveling valve and misc parts related HD or Aumn rear drive shaft frame stiffeners Lund Visor Dually rear fenders ( and kit to add dual rear tires) factory cub holders (Oh, wait, JEEP decided Comanche owners don't drink n drive, so they omitted cup holders. Sadly the Comanche was not being built during the "Great Cup Holder Wars" of the late 90's. ) Link to comment Share on other sites More sharing options...
Dadinator Posted July 10, 2015 Share Posted July 10, 2015 Or how about just make the truck again? A modern interpretation. Link to comment Share on other sites More sharing options...
cruiser54 Posted July 10, 2015 Share Posted July 10, 2015 Fuel tank sending unit bed bar / roll bar real gas tank skid ( I have an original metal gas take skid plate already) Rock sliders, or side bars that can actually hold weight Aftermarket Transmission controller rear axle brake leveling valve and misc parts related HD or Aumn rear drive shaft frame stiffeners Lund Visor Dually rear fenders ( and kit to add dual rear tires) factory cub holders (Oh, wait, JEEP decided Comanche owners don't drink n drive, so they omitted cup holders. Sadly the Comanche was not being built during the "Great Cup Holder Wars" of the late 90's. ) Trans controller is same as XJ. Do you really need the brake valve stuff? Link to comment Share on other sites More sharing options...
shelbyluvv Posted July 10, 2015 Share Posted July 10, 2015 Sliders. There are LWB sliders on the market but no SWB sliders. Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted July 10, 2015 Share Posted July 10, 2015 Transmission cooler dorman 918-251 Link to comment Share on other sites More sharing options...
cruiser54 Posted July 10, 2015 Share Posted July 10, 2015 Good info is appearing..... Link to comment Share on other sites More sharing options...
mik666 Posted July 10, 2015 Share Posted July 10, 2015 http://media.santabanta.com/gallery/global%20celebrities%28f%29/hannah%20davis/hannah-davis-5-e.jpg one of these would be awesome! Link to comment Share on other sites More sharing options...
ComancheKid45 Posted July 10, 2015 Share Posted July 10, 2015 Tail Lights would be a great place to start. Link to comment Share on other sites More sharing options...
outlaw star Posted July 10, 2015 Share Posted July 10, 2015 Tail Lights would be a great place to start.You know, with all this 3D printer crap that everybody keeps making stuff with, I'm surprised no one has thought to scan and replicate the housings or lenses yet. Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted July 10, 2015 Share Posted July 10, 2015 Tail Lights would be a great place to start.You know, with all this 3D printer crap that everybody keeps making stuff with, I'm surprised no one has thought to scan and replicate the housings or lenses yet. I spoke with my neighbor that 3d printed the tilt trim bezels I was selling about making tail lights . The problem with a 3d printer is that the lens would not be clear , it would work for either making the black portion of the tail light or might be useful in making the molds . He told me injection molds would be best . If someone was serious I would LOAN a NOS pair to make the reverse molds , but doubt that's ever going to happen . Link to comment Share on other sites More sharing options...
outlaw star Posted July 10, 2015 Share Posted July 10, 2015 Tail Lights would be a great place to start.You know, with all this 3D printer crap that everybody keeps making stuff with, I'm surprised no one has thought to scan and replicate the housings or lenses yet.I spoke with my neighbor that 3d printed the tilt trim bezels I was selling about making tail lights . The problem with a 3d printer is that the lens would not be clear , it would work for either making the black portion of the tail light or might be useful in making the molds . He told me injection molds would be best . If someone was serious I would LOAN a NOS pair to make the reverse molds , but doubt that's ever going to happen . That's what I mean. Making the housing with the printer and a mold for the lens. Just surprised no one has attempted this yet. Link to comment Share on other sites More sharing options...
COFFMAN Posted July 13, 2015 Share Posted July 13, 2015 http://media.santabanta.com/gallery/global%20celebrities%28f%29/hannah%20davis/hannah-davis-5-e.jpg one of these would be awesome! Yep, very tidy :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup: Link to comment Share on other sites More sharing options...
89eliminator Posted July 13, 2015 Share Posted July 13, 2015 frame stiffeners i know nothing about how well they fit, but they look pretty decent and the price is damn good as well. http://www.t-mfab.com/store-3/mj-unibody-stiffiners/ Link to comment Share on other sites More sharing options...
91Pioneer Posted July 13, 2015 Share Posted July 13, 2015 Replicas of factory rear bumper. Link to comment Share on other sites More sharing options...
Tanner Posted July 13, 2015 Share Posted July 13, 2015 OEM spec wiring harness Link to comment Share on other sites More sharing options...
daking Posted July 13, 2015 Share Posted July 13, 2015 another vote for repo tail lights. Link to comment Share on other sites More sharing options...
88whitemanche Posted July 13, 2015 Share Posted July 13, 2015 The steel gas tank skid for both short and long beds.... Link to comment Share on other sites More sharing options...
Old man with MJ Posted July 14, 2015 Share Posted July 14, 2015 How about a receiver hitch; just like the Draw-Titel 75021 Link to comment Share on other sites More sharing options...
krustyballer16 Posted July 14, 2015 Share Posted July 14, 2015 How about a receiver hitch; just like the Draw-Titel 75021 Hitch plates(and complete hitches if you need one) coming very soon! I promise! Link to comment Share on other sites More sharing options...
Old man with MJ Posted July 14, 2015 Share Posted July 14, 2015 I have heard that before, one or two years worth of discussions on here! Just lightly kidding, not criticizing you. Thanks Link to comment Share on other sites More sharing options...
Megadan Posted July 14, 2015 Share Posted July 14, 2015 How about a receiver hitch; just like the Draw-Titel 75021 Hitch plates(and complete hitches if you need one) coming very soon! I promise! Definitely interested in a hitch. Honestly, aside from a number of replacement parts already named, I would love to have a readily available truck topper that actually fit. The one company that makes a folding soft topper only makes them for the SWB trucks. I would love one of those, but I have a LWB...FTL. Link to comment Share on other sites More sharing options...
krustyballer16 Posted July 14, 2015 Share Posted July 14, 2015 I have heard that before, one or two years worth of discussions on here! Just lightly kidding, not criticizing you. Thanks How about a receiver hitch; just like the Draw-Titel 75021 Hitch plates(and complete hitches if you need one) coming very soon! I promise! Definitely interested in a hitch. Honestly, aside from a number of replacement parts already named, I would love to have a readily available truck topper that actually fit. The one company that makes a folding soft topper only makes them for the SWB trucks. I would love one of those, but I have a LWB...FTL. I bought the steel and laser time today. So I'm in line to get it cut out at work. Hopefully in a week or 2! It cost a little more than I was expecting and hopefully shipping won't be bad and I can stick with the original price I have in my head...be patient. Ha. Link to comment Share on other sites More sharing options...
big66440 Posted July 15, 2015 Share Posted July 15, 2015 How about good quality replacement sensors for the Renix guys, instead of the crap that's offered by the aftermarket,,,,,, and maybe a high quality header too :dunno: Link to comment Share on other sites More sharing options...
krustyballer16 Posted July 15, 2015 Share Posted July 15, 2015 hitch plate pre ordering available. check out my post in the for sale section Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now