fiatslug87

From what I've read, '95 & '96 don't require any modification other than new lines to the block. Make sure you get the aluminum spacer, it's between the foam seal and the booster. I have a '95 one awaiting install. The XJ fan should fit.

Probably dealer only (if they still carry them) or at the junk yard for the tee. I've done this to mine and prefer the 2.5L overflow to a universal. It fits along the fender but the fuel pump resistor and the EGR solenoid(?) need relocation. I've always picked up the overflow at the JY, no help on getting one new. Seen used ones on eBay but usually pricey compared to JY.

http://comancheclub.com/forums/viewtopic.php?f=3&t=25607

Wow! Great resource. Thanks G.

Tonight, Selby 2004 Bobcat Zinfandel, wife's selection.

Ardbeg

Glad you're OK, but how's Daisy? :D

The fuel line quick connects: 5/16 line http://www.jeep4x4center.com/fuel-oil-cooler-line-repair-kit-83502745.html 3/8 line http://www.jeep4x4center.com/fuel-oil-cooler-line-repair-kit-83504447.html

I've never heard of borg warner are they a good brand? Indy 500 trophy... I've had good luck with them.

Any of you own a dark blue SporTruck with gold stripes and a shell? Saw one on South 405 near Exit 9 (lake Washington?) today at 3:20pm, passed you by in the carpool lane on my way to the airport. Funny, I saw a cream colored one on my way to the airport in Walnut Creek, CA Monday morning at 5:00am. Two MJs, two states, one week. Bored at the airport. :ack:

I just purchased a rebuilt AX-15 and Pennzoil Synchromesh was recommended.

For all your '88 electrical questions http://comancheclub.com/forums/viewtopic.php?f=9&t=12734&hilit=Electrical

Hi Joe, that's the only part I didn't see in your garage last weekend!! ;)

Some of us like our vehicles complete and intact. :yes:

I have a set of MJ bench seat brackets, pm me if interested. BTW how far are you from Woodinville? I'll be up there next week and the following week. Image Not Found

I'll be removing my BA 10/5 in a few weeks, you can have whatever you need. I'll let you know.

If $500 MJ can't hook you up let me know, I have some.

For the 4.0? Good question, I always assumed they were the same but the '90 parts catalog has different PNs for auto and manual TBs (same between years). :hmm:

Did '92 Eliminators have the 10 hole wheels without the rivets around the perimeter? Learn something new every day.

http://comancheclub.com/forums/viewtopic.php?f=9&t=12734&hilit=Electrical+manual page 56 of the manual

Dash surround, door panels and seat covers from a '96 Country Edition XJ. Nothing says luxury like plastic wood trim :rotf: :rotf: :rotf:

isn't it on page 63 and 92?

http://comancheclub.com/forums/viewtopic.php?f=9&t=12734&hilit=Electrical

No wonder yours is leaking, as ParadiseMJ said that plastic clip goes on the line then the o-ring then a plastic spacer then another o-ring then this assembly snaps into the fuel pressure regulator. Look at the picture in the link I posted, o-rings and spacer are black it that item.

The fuel line quick connects: 5/16 line http://www.jeep4x4center.com/fuel-oil-cooler-line-repair-kit-83502745.html 3/8 line http://www.jeep4x4center.com/fuel-oil-cooler-line-repair-kit-83504447.html Put some engine oil on the o-rings before you snap the fitting into the rail.