Strokermjcomanche

Hope that's not an OBD2 vehicle....

It will move back over , you'll either need to bring hose clamps or washers to keep it in place . Or you can flip the fork if you take the Cclips out and that should put it in place too . The bolts are 7/16 iirc and there are several detailed threads on here as to how fix it . http://comancheclub.com/topic/17377-cad-fix-1/

Double sided 3m tape .

Not to a Comanche ... maybe to another vehicle.

Black or Chrome only .

That's has went through Barrett Jackson before , sold for 12 k . Owned by James Coudright

Small update : Had all of my side windows tinted , installed the power guts in the doors and put the new panels on .... Today I pulled the rest of the grey interior and partially installed the black dash , steering column , NOS parking brake and cross body harness .

You didn't state wether it was manual or power ....

This one?

This guy has quite a few delco map sensors at a good price....http://m.ebay.com/itm/NOS-GM-1980S-BAR-MAP-SENSOR-RED-835-CODE-/391741766665?hash=item5b35a0fc09%3Ag%3AYoAAAOSwLEtYhpiA&_trkparms=pageci%253A18b5e6f8-166d-11e7-b991-74dbd180b1a5%257Cparentrq%253A26c8d62c15b0a6228615d255ffff6d1e%257Ciid%253A1

Have you tried CLR ?

Lol, i guess he sold the rest of the jeep after posted the link . Btw , the sending unit looks beautiful. Thanks again .

The search is finally over .... https://akroncanton.craigslist.org/cto/6059301061.html Picked them up today for $50 , they were only 40 minutes away so no shipping. Thanks for all the help everyone.

Did you weld a shock mount on there? Yes , actually it's a 5/8 bolt with washers on each side of the shock ( with one washer welded to the bolt .

http://comancheclub.com/topic/47985-project-code-red-88-olympic-edition/page-4 Here it is on my build thread ....

Are you going SUA or SOA ? I used XJ plates and welded a shock mount to it , I'll see if I can find a picture of it ...

I doubt I'll go this year . I like the show , but the 4 1/2 hour drive makes it not worth it .

Anything with a V in front of the part number is not going to be a true mopar part , it's considered the value line brand like Monroe , felpro etc .

Ive seen them under the seat , behind the door panels , and even under the carpet .I'm sure you already checked the owners manual pouch ( if it has one )

Ordered , thanks!

pretty sure they're meant to work from the inside .

I don't think the one you linked would work without the bracket because it has a bushing at each end , unless they make an adapter .. It's for a ZJ rear - just read the fine print. That explains it then .

This is precisely why I chose the JKS. Frame brackets for every one that I looked at at the time either dropped down, or, and. moved forward. Also, I like the factory bracket, it has a bulged pressed in for strength, the aftermarket bracket look weak. Everyone has their preferences, I wanted the sleeve and also seen that the JKS bar required drilling , which I'm not prepared to do. Something that bolts directly on is fine for what I'm using the truck for .

I don't think the one you linked would work without the bracket because it has a bushing at each end , unless they make an adapter ..

https://www.amazon.com/gp/aw/d/B00OPEUO0I/ref=mp_s_a_1_6?ie=UTF8&qid=1489345365&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=jeep+cherokee+adjustable+track+bar