Pete M

same as the rear, with the plastic pipe as spacers and lock rings to retain the assembly. I'll see if I can get my father to send me a pic of it.

the list of individuals that have managed to break an 8.8 shaft is very small indeed. :D

I full on Golden Eagle paint scheme would be totally retro and might work :D

what kind of info are you looking for? I think the build date is on the door sticker.

what's the width and wheel bolt pattern?

I bet that was a fun toy :D

sorta. rust likes to hide and propagate under the frame stiffener thingy. :(

Yes it is 2" of tire but you only gain 1" of ground clearance. For a DD I would go 33's, especially with only 4.10 gears. :yeah that: to me the extra inch wasn't worth the hassles.

either I didn't get stuck, or I was going to be stuck regardless of the extra 1 inch of tire lift. besides, more tire equals more headaches (mpgs, breakage, wear, fender stuffage, etc).

got 33s under my 88 (4.0/stick/4.10s/6"lift) and not once while wheeling have I ever wished I had 35s. :dunno:

yes I have. it was a royal pain in the butt. :( but it is possible :thumbsup:

I feel your pain since I'm kinda in the same boat. just can't take them all with me for this move to GA. though I am trying hard to bring my low mile renix block... I say keep the 4.0, unload the rest. :thumbsup:

2001 Mallett Hammer Z06

I don't think this one is going to get the full resto... :(

it can be eliminated, but those wires still need to be connected. :yes: the computer puts a full 12 volts directly to the fuel pump at startup and then a couple seconds later switches power to route through the resistor which cuts the volts which lowers the speed of the pump which lowers the noise.

neat! :thumbsup: sounds as logical as anything else for this Detroit street mutt :D

I'm not apposed to the concept, but the execution always seems to be poor. :(

CD? cute doggy?

yeah, but the chocolate will melt in my pocket before I get anywhere near the plant :(

after much experimentation these are my base pocket contents: left front pocket: samsung rugby pro right front pocket: keys cherry chapstick Fenix E11 flashlight rubber band wallet with: -drivers license -debit card -comanche club card -2 bandaids left back pocket: 5 tissues folded up and a leatherman juice S2 on my hip my coat pockets (or cargo pants depending on the season) have: paper clip floss paper measure tape from ikea more kleenex pen short pencil small bag of skittles couple rubber bands moist towelette 1 dime most of which is stored in a sandwich bag and yes, I watched a lot of MacGyver when I was young :D you'd be amazed what you can accomplish with some basic "tools"

cool! well, then the bed and cab have a lot less of the separate movement than other trucks do, but it's not 0.

within the same year/model, the AX-4 and AX-5 are identical in every way except for the 5th gear. and a 5 added to the stickshift knob :D

and how are you lifting the front of the truck?

what are you doing for the front of the truck?

brilliant! :clapping: