How to get this screw out

[jdog]

1 minute ago, Pete M said:

clearly the only solution is fire

 

 

Ah poor Sportbar

[Pete M]

at least it was aftermarket?

 

 

[Pete M]

is it wrong that I kinda really want that tailgate?

[Ωhm]

3 minutes ago, Pete M said:

is it wrong that I kinda really want that tailgate?

Wrong, No. Its more like an illness. Isn't it? 

[Minuit]

Sure hope nobody was actually in that thing when the roof got squished...

[jdog]

5 minutes ago, Pete M said:

is it wrong that I kinda really want that tailgate?

Is that your next bed purchase?

[jdog]

10 minutes ago, Pete M said:

clearly the only solution is fire

 

 

I wonder if it's got an a pillar screw stuck

[jdog]

3 minutes ago, Minuit said:

Sure hope nobody was actually in that thing when the roof got squished...

It's almost like they pulled it up with something, it's very strange

[Pete M]

probably not, since they used fire like I suggested  

[ghetdjc320]

Once that screw has been mastered anything will be easy. Setting up R&P, building a stroker, swapping axles converting to front leafs, supercharging and eventually,,, driving it down the road. Nothing will be hard once you master the #6 pan head Phillips. 

[eaglescout526]

"Screw in, screw out" 

[jdog]

Just now, eaglescout526 said:

"Screw in, screw out" 

Said Mr Miyagi

[Minuit]

21 minutes ago, ghetdjc320 said:

Once that screw has been mastered anything will be easy. Setting up R&P, building a stroker, swapping axles converting to front leafs, supercharging and eventually,,, driving it down the road. Nothing will hard once you master the #6 pan head Phillips. 

But what if he comes across a #8 pan head Philips, or heaven forbid a #10? What then?

[ghetdjc320]

34 minutes ago, Minuit said:

But what if he comes across a #8 pan head Philips, or heaven forbid a #10? What then?

Let’s save that subject for another 100+ post thread. But by the time he masters the #10 I’d say it’s time for the drivers license

[89 MJ]

Jesse, could you make a tutorial video on getting this screws out?

[Jesse J]

13 minutes ago, 89 MJ said:

Jesse, could you make a tutorial video on getting this screws out?

why?

[89 MJ]

30 minutes ago, Jesse J said:

why?

I want to see how it comes out. 

[Jesse J]

Just now, 89 MJ said:

I want to see how it comes out. 

I will think about it. again might leave it as a joke

[jdog]

30 minutes ago, 89 MJ said:

I want to see how it comes out. 

If it comes out would this thread be a success?

[Jesse J]

16 minutes ago, jdog said:

If it comes out would this thread be a success?

five pages of pure helpfulness 

[jdog]

But if you leave it would it be considered a fail since nothing in the thread worked (except maybe @Pete M
Fire but I wouldn't try it

[Pete M]

55 minutes ago, Jesse J said:

 might leave it as a joke

 

I would.  makes for a good story for later.  

[jdog]

On 2/18/2021 at 6:59 PM, Minuit said:

With 55 replies at the time of writing, this thread is already on Page 8 of 1145 if you sort by Most Replied. 64 would get it to Page 5.

 

114 would kick the bottom of Page 1 down to Page 2. Come on, we can do this.

Where is it sitting now?

[jdog]

If you do get it out be sure to let us know which fine tool you used so we can all go get one. Lol

[Jesse J]

lol. I am going to give it another shot later. it is really jammed. I could go all hot roddy and chop the top lol