Headliner Poll

[jpnjim]

I've had MJ's with headliners in all stages of disintegration (except for the first option :( )

 

Currently my 'Grandpa Jeep' has the stock material in place, ripped on both sides, and held up with a couple dozen pins.

 

 

The 'Trail Jeep' has just the fiberboard panel left, spray painted black for now (looks slightly less horrible than it sounds :D )

 

 

I'm pretty sure EVERY MJ owner has dealt with this problem at one time, or another.

 

So, post up guys. :cheers:

[Pete M]

I have multiple trucks so I included their various levels of decrepitude. :D

[freakjeep93]

hanging down on both.

[comanche09]

I had my headliner re-upholstered in the original color. Luckily, the headliner molding/shell was still intact when I removed the original nasty faded/stained and safety pined cloth.

[mnkyboy]

My board was good but the fabric had been removed

 

So i recovered it

[jpnjim]

My board was good but the fabric had been removed

 

So i recovered it

:bowdown: :bowdown:

[driggity]

Completely gone on my truck. Nice place to stick magnets though. And the paint there is the best looking paint on the entire truck. Which isn't too difficult I suppose.

[HOrnbrod]

Mine's still the original and looks as new. Don't know how. Maybe because it's always been garaged.... :cheers:

[89eliminator]

the one in the 89 sagged. i tried fixing it with 3M adhesive. it stuck for like a month. i took it to a local interior shop and the put a whole new headliner in. i think it was $175.

[james750]

I redid mine with some laminating adhesive and headliner fabric. Its still holding after over a year.

[mvusse]

Option 2, but "have been going to" fix it for more than two years now. My 94 XJ is the same.

[jimoshel]

Took a SawAll and cut a line just above the windshield and just below the rear window totaling removing it. Then did the same to the door posts so it would match.

[Oizarod115]

The 'Trail Jeep' has just the fiberboard panel left, spray painted black for now (looks slightly less horrible than it sounds :D )

 

 

I'm pretty sure EVERY MJ owner has dealt with this problem at one time, or another.

 

So, post up guys. :cheers:

 

ahaha, i know exactly what you've got goin on, except i never painted mine black... so it's that horrible green color :clapping:

[deziped]

I've got the pin-up job.

[87Warrior]

It is stock and in place. Passenger rear corner is starting to droop a little. It will be coming out and getting fixed 100% soon enough.

[vaquaro]

I re-inforced the board w/fiberglass mat on the top ( roof side ) then brushed off all the loose particles/foam/glue and brushed /rolled a couple coats of matte finish acrylic-latex paint . Did the home made fix 5 years ago , still looks great and its washable . :thumbsup:

[ParadiseMJ]

Mine was gone when I bought the truck. I found a nice intact board at the JY. Wrong color for me but it looked like the PO had replaced it, the fabric is relatively new.

 

I had previously done the one in my XJ and so I'm going about picking fabric etc. now. I've already insulated the ceiling with the foil/bubble wrap stuff. That's working for now.

[one_bad_MJ]

headliner what??? what headliner haha i need to go tot he jy and pull out one and re cover it. and insulate that roof it gets cold in there

[1990 Pioneer 4x4]

Mine is looking pretty lamb with the staples holding it partially up. I like mnkyboy’s, but I wonder what it would look like if i covered the fiberboard with Line-X/Rhino Liner? :idea:

[freakjeep93]

:agree: thats what i was thinking...

[dasbrick]

I was curious about doing that. But if I do, I'm fabbing an equipment console for my radios and scanner.

[1990 Pioneer 4x4]

:agree: thats what i was thinking...

 

Do it and let us know how it turns out before we spend the money and time... ;)

 

I was curious about doing that. But if I do, I'm fabbing an equipment console for my radios and scanner.

 

nice idea, i'd like to fab something for a cb, to take off the sharp corners. Still not convienced theres enough room for head clearance.

[kro10000]

PO did a custom job

 

[smithe1811]

i was lucky enough that my parts truck had a good headliner in it for a sunroof.it in good shape just needs to be reupholstered.

 

 

 

headliner what??? what headliner haha i need to go tot he jy and pull out one and re cover it. and insulate that roof it gets cold in there

 

how far is Indiana from scranton? ive got a decent headliner sitting amongst my parts.

[MJ is dead]

Mine is in great shape, aside from being baby blue in color :ack: