Dechion Posted February 2, 2011 Share Posted February 2, 2011 Today I dug my MJ out of a drift that was up to and onto the hood, only to find out that I didn't have to go to work afterall. Not that I'm complaining, at least I didn't make the trip there to find out. Oh, and since I am home and was already outside I fixed the ground behind the tail light. :nuts: Link to comment Share on other sites More sharing options...
cody4359 Posted February 2, 2011 Share Posted February 2, 2011 thats a fancy spiral you got in the grill what is that??? looks like photoshop nope, lookin at the grill above the licensplate, theres a spiraly twist Link to comment Share on other sites More sharing options...
COMJNUT Posted February 2, 2011 Share Posted February 2, 2011 thats a fancy spiral you got in the grill what is that??? looks like photoshop you guys talking about the blurred license plate numbers? Link to comment Share on other sites More sharing options...
cody4359 Posted February 2, 2011 Share Posted February 2, 2011 thats a fancy spiral you got in the GRILL Link to comment Share on other sites More sharing options...
COMJNUT Posted February 2, 2011 Share Posted February 2, 2011 thats a fancy spiral you got in the GRILL dur... :dunce: Link to comment Share on other sites More sharing options...
cody4359 Posted February 2, 2011 Share Posted February 2, 2011 :D ..... i looked at my mj today, thought about working on it. then i went back inside and here i am on the computer.. i need motovation Link to comment Share on other sites More sharing options...
MJRemi Posted February 4, 2011 Share Posted February 4, 2011 I replaced the oil pressure sensor and the fuel filter. I gave a few coats of engine degreaser to the D44 I just bought. It's still filthy with thick grease. I received my spidertrax wheel spacers from UPS. Link to comment Share on other sites More sharing options...
comanche12 Posted February 4, 2011 Share Posted February 4, 2011 just got couple brake steel lines for my MJ. I'm not feeling like do it tonight. too cold outside. -5*F Link to comment Share on other sites More sharing options...
freakjeep93 Posted February 4, 2011 Share Posted February 4, 2011 thought about mine... cursed not having a garage or a place to work near my tools. began makin plans for my garage next year. Link to comment Share on other sites More sharing options...
comanche12 Posted February 4, 2011 Share Posted February 4, 2011 get ready to go work on my mj's brake steel lines. I just learned about amc 20 and realize that my rear axle that removed for 9" rear axle. its was on my bed when i bought my mj. I removed it and leave it on floor in front of my jeep, this axle is NOT d35, its AMC20. Is this picture is actually a AMC 20???????????? diff cover have pretty bad dent. I'm pretty sure its amc 20! Link to comment Share on other sites More sharing options...
btm24 Posted February 4, 2011 Share Posted February 4, 2011 that its is congrats! :clapping: I think it should have 4:10 gearing also :D BRandon Link to comment Share on other sites More sharing options...
comanche12 Posted February 4, 2011 Share Posted February 4, 2011 that its is congrats! :clapping: I think it should have 4.10 gearing also :D BRandon haha knew it well too bad i already have stronger axles. I was plan to sell it to metal scrap but now i change mind and sell it to someone who can restore it. axle shafts are pretty in bad condition(rust) too. Link to comment Share on other sites More sharing options...
dasbulliwagen Posted February 4, 2011 Share Posted February 4, 2011 that its is congrats! :clapping: I think it should have 4.10 gearing also :D BRandon haha knew it well too bad i already have stronger axles. I was plan to sell it to metal scrap but now i change mind and sell it to someone who can restore it. axle shafts are pretty in bad condition(rust) too. I'm sure AMC-MJ would like to buy it from you, he in your part of the country too. I think hes looking for one if I remember right. Link to comment Share on other sites More sharing options...
comanche12 Posted February 4, 2011 Share Posted February 4, 2011 that its is congrats! :clapping: I think it should have 4.10 gearing also :D BRandon haha knew it well too bad i already have stronger axles. I was plan to sell it to metal scrap but now i change mind and sell it to someone who can restore it. axle shafts are pretty in bad condition(rust) too. I'm sure AMC-MJ would like to buy it from you, he in your part of the country too. I think hes looking for one if I remember right. hmm lets see if hes still looking for one. Ill pm him. Link to comment Share on other sites More sharing options...
lostissues Posted February 4, 2011 Share Posted February 4, 2011 technically I did it yesterday but I shoveled all the snow off of it and then realised that my front liscence plate was missing (clips on to roller fair leads) it is either in a heep of snow right in front of it or somewhere in the back woods of my house from when I went in the wood to pick up a couple loads of firewood when there was no snow on the ground. guess I will have to wait till spring to find it :fs1: Link to comment Share on other sites More sharing options...
MiNi Beast Posted February 5, 2011 Share Posted February 5, 2011 picked up a good H.O. block and intake, then a good set of doors as well, so may cut up the doors on it now to see if can't make a set of half doors. :yes: Link to comment Share on other sites More sharing options...
comanche12 Posted February 5, 2011 Share Posted February 5, 2011 done with brake steel lines. gotta wait someday until my brother come by to help me bleed the brakes. I forget to bench bleed the master cylinder. its gonna take an while to do bleed the brakes. :doh: Link to comment Share on other sites More sharing options...
JCole Posted February 6, 2011 Share Posted February 6, 2011 Sent the engine to the machine shop for a .030 job. can't wait to start the rebuild. Link to comment Share on other sites More sharing options...
MiNi Beast Posted February 8, 2011 Share Posted February 8, 2011 picked up the 36's I'll be running till get the funds for the 37's. Tomorrow be picking up the brakes and calipers for the D44 as well be picking up my winch for the jeep as well. Just a XRC 8000, hold me over for now. Link to comment Share on other sites More sharing options...
comanche12 Posted February 8, 2011 Share Posted February 8, 2011 Bleed the brakes and tried harbor freight tool called one men bleeder. It's work like charm! I can watching the fluid come out in clear tube with gravity method but can see when brake fluid was pushing air out, etc. Also got brake bender piler from HF too. It's bend brake line like charm too, made a perfect coil in first try without make kink on lines :banana: Also installed license plate lamps to make my mj more a street legal :thumbsup: Link to comment Share on other sites More sharing options...
comanche12 Posted February 8, 2011 Share Posted February 8, 2011 took my mj out of garage to stretch her leg again. brake feel sponge little. obv need bleed more. also test 4x4... part time 4x4 didnt light on on my idiot light and the front axle not even engage while try spin the tires on ice driveway :dunno: edit: just found out why that cause... need new hub lockers :doh: here pictures of my jeep begin picture lady of the night in snow that all my jeep able to go this deep with rwd only on icy driveway Link to comment Share on other sites More sharing options...
btm24 Posted February 9, 2011 Share Posted February 9, 2011 Man that looks great! good job Brandon Link to comment Share on other sites More sharing options...
comanche12 Posted February 9, 2011 Share Posted February 9, 2011 Man that looks great! good job Brandon thanks man but still dislike the bumpers and paint job, those dents on body make me crazy also can't wait to get fender flares and 35/36 inches tires :clapping: Link to comment Share on other sites More sharing options...
MiNi Beast Posted February 9, 2011 Share Posted February 9, 2011 picked up the hubs and brakes for the 44 and the winch. :yes: Link to comment Share on other sites More sharing options...
MiNi Beast Posted February 10, 2011 Share Posted February 10, 2011 have a winch plate being made up, to be added with winch by this weekend, Now going out to swap steering column. :wrench: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now