Jeep Driver

Very cool!

I'm only doing the rear, I seriously doubt you'll get the front to work out.

Precisely the same reason.

http://www.speedhut.com/kit/GR4-DUAL-GPSQKIT-ST-03T/2-gauge-custom-set---Dual-Gauge---160mph-GPS-Speedometer---8K-Tachometer,-Quad-Gauge?gclid=Cj0KCQjwr53OBRCDARIsAL0vKrN6ilpnY3xSEiE_kF7pkOVUBDEh5Dumwn_piOhzl-KMYsvROAOX8f0aAmOREALw_wcB Two gauge set...but, I cannot live with the Tach as an afterthought, particularly where I'm going with my engine/truck.

I measured it once a long time ago..........IIRC............4" by 12".

All my pics go directly/automatically from my phone to my desk top, from there, to Picassa, from there, to Imgur, from there, to here. You cannot function entirely from a phone.

http://www.speedhut.com/gauge/GR4-QUAD-01/1/Quad-Gauge---Water-Temp,-Volts,-Oil-psi,-Fuel-Level?gclid=Cj0KCQjwr53OBRCDARIsAL0vKrPcDVeMh0TxqZQkxr5qPsH6ziuBkLLbQ5Z9NPsbK7DSYCRlwlnLo1caAqBiEALw_wcB Speedo and Tach.............about $300 each. You're at $900........but, you might squeeze them in.

Fuel, alt, oil, temp..............no one makes a 1.5 or 1.75 gauge, that's the problem, the 2 1/6 or 2 1/8 gauges won't fit. You can go quad..........that's not for me. Here's the problem- Dakota Digital could easily produce a gauge set that would replace the current cluster.......plug and play. But, they won't. Why? Because XJ and MJ people will not spend $800++ for a set of quality gauges. Same goes for just about any other high end manufacture. You, we, have ourselves to blame. I will resolve this problem for myself in the the near future.

Outward face of the flange to the outward face of the axle hub (WMS).

I'm looking for brake flange bolt measurements and an offset measurement. I'm hoping one of you has the specs already, not asking for anyone to tear anything apart and measure. Below is what I'm hoping to accomplish. Wilwood is responsive but not proactive, I will need exact measurements.

Adjustable TBs are not that expensive. You are now at the limit of the stock bar. Besides, stock replacement bars are junk, pure junk. I replaced the MJ and XJ bars twice before I went JKS on both.

make of it what you will......... http://www.dakota-durango.com/forum/showthread.php?t=148610

Replace the fuel pump relay and see what happens.

Thanks, appreciate it. I'll do the sprayon from LineX or other. Just keeping an open mind about alternatives.

Yeah, that's what it is, there is one local to me.

I have much to say here.........but I won't. The only thing I suggest is that you edit your OP and never put thoughts like that in writing again..........ever!

No you're not the first person to have this issue my passenger side is tied off to the frame if I remember correctly I'll try and get you a pic in the next day or two but you can use a spring

Very cool!

Hellwig

I've got more work to do, couple of low areas on the top, makes the upper line look squirrelly. I'll soften the lines after I get the lows out. Bed rails were beat to death though.

You can make up those plates with simple hand tools in about an hour. Same plate as pictured here.

For whatever reason, someone thinks you are sharp, real sharp. My aunt spend some 50 years in retail, last 20 or so at Publix, she retired there a couple of years ago and did OK. She never wanted management. We finally got 2 Publix stores here, I'm happy now. Dude, you are 20 years old, guys your age don't get 45K offers, hell, most guys my age don't. I'm glad to see you got your answers straight from the horses mouths, I could have told you the same. You won't make any money in the trades unless you specialize and you won't get there for another 20 years. Trades are tough, real tough, and you are only valuable as long as you produce. I've been in the trades for 36 years and I'm just now cutting out my niche, I fix what others F-up. I was not going to map out your career for you, none of my business. That said....... Bust your @$$ for another 8 years and you'll have your own store, do that at 6 figures for another 10 years and you can retire from Publix at 38, live your life right- you'll be worth $2M. Life does not end at 40, and fun and frolic is highly overrated, especially when you only got $20 in your pocket after your bills are paid.

A must see on the big screen.

How does it fit? any pics? and what brand?