boxyjeep

Buy one from SMS headliners. They are a vendor here.

Its 100% a scam.

https://boxyjeep.com/products/jeep-comanche-6-5-rear-speaker-brackets

Oh geez, I forgot those guys too!

Oh crap! I was already ready for the Grand Cherokee crew to come after me but totally forgot about the CJ club!

Someone had posted about wanting these awhile back but I can’t find the thread anymore. Got a bunch printed up and have them for sale on my website…. Came out pretty good. https://boxyjeep.com/products/white-oval-jeep-code-decal

Rough Country radius arm setup adds to the fun….

Looking good!

NP231 and 242 in stock... $5.99 to $7.99 shipped to US (slightly more for international shipping). https://boxyjeep.com/products/transfer-case-visor-instruction-decal-1984-2001

There are some people who have tried to fit a LWB tank into a SWB truck. Some say it isn't possible, but I've seen pics. The only issue is with the filler neck location. Otherwise, it will clear the rear axle. I plan on doing this in my SWB truck at some point in the future.

Alright, I think I might be convinced to get one. Can you tell me which color would be closest to this fabric? I had my visors redone with it. https://www.amazon.com/gp/product/B089YWB8SM/

Only Pearl White, Colorado Red, and Dark Baltic Metallic per the documentation.

Love the disclaimer at the bottom "NOT RECOMMENDED USE"

Strap it to a thin pallet and us FedEx Freight or one of the other LTL carriers. Not gonna be cheap.

Ok, what were the changes?

Thanks for the response. Many people are running the aftermarket rear windows, so wasn't sure if it was a common thing. I bought my original headliner from you in ~2018 timeframe, but never reached out about fitment. It wasn't bad, just not ideal and hung down an inch or so over the top of the rear window. Would you consider selling just the foam form without any material so that I can modify and then add my own material to it?

Congrats! Make sure to drive your MJ to work the first day so that it can properly mark it's territory in the parking lot :-)

Can you make them slightly smaller? I bought one a few years back and it was a bit too big. I re-did my original and found that was too big too. Not sure if they expand over time and also happened to your template, or if it’s from my JR Lawrence rear window. Needs to be about an inch “up” my the front and rear windshields and maybe 1/2” up on the sides. Can you also do black alcantera material?

I can definitely duplicate the decal. PM me a close-up picture, taken square on with good lighting. Also will need the measurements (width and height).

Thanks! It's been a long road (over 5 years), but it's finally getting close to final form :-)

I've been following you on FB and saw you snagged that sport bar. I'm down in Laguna Niguel and also have a red MJ. Rebel Offroad does Jeep's and Coffee every month or so--you'll have to bring that thing out. It's in amazing condition.

Thanks! My first few XJ's were 5-speed back when I was in my late teens/early 20's and I really liked that, but it got tiring as a daily driver. That being said, I don't drive my MJ too much so it'll be a nice change of pace to have something fun to drive when I take it out. I'm still debating on whether or not I can get by with the 3.55 gears and 33's. It's bearable currently with the stroker engine and automatic transmission. If I did re-gear, I think I would only want to step up to 4.10's if it wasn't good with the standard transmission...

I started a new job a few months back and have been super busy with that and ramping up BoxyJeep.com. That being said, I've been accumulating parts for the next phase of the build and just got this in the mail. Next phase of the build: Swap the old AW4 for a new Novak AX15 with external slave Rebuild the NP231 and install 23-spline input shaft and SYE Swap out automatic pedals and shifter for manual parts Measure for rear CV driveshaft and get it ordered De-pin and minimize wiring harness to eliminate automatic TCU bits Install NOS Pacesetter CARB-legal header and verify manifold seal New power steering pump and Mushimoto cooling fans Get tires re-balanced and aligned (had minor death wobble when I last took it out)

I still have a ton of these in stock and ready to ship. https://boxyjeep.com/products/jeep-comanche-replacement-tailgate-handle-1986-1992

Pretty clean and original, all things considered. I'm very intrigued to see how much this ends up selling for. https://bringatrailer.com/listing/no-reserve-1986-jeep-comanche-custom-4x4/