shelbyluvv Posted February 19, 2016 Share Posted February 19, 2016 The time has come for real deal release of the long awaited Krustyballer sliders, bumpers and hitches! Contact Brandon to order your parts.*A $100 DEPOSIT TO PURCHASE MATERIALS IS REQUIRED BEFORE ANY PART WILL BE MADE* Mounting hardware is not included with the sliders or bumpers. You can reuse your stock bolts but they really should be upgraded to grade 8. SLIDERS SWB available in 2"x4" slider (pictured below) and 2"x3" (should have pictures soon) WITH STEP--$335+ shipping WITHOUT STEP--$305+ shipping WITH STEP PLATE--$375+ shipping LWB WITH STEP--$360+ shipping WITHOUT STEP--$330+ shipping WITH STEP PLATE--$400+ shipping XJ SLIDERS ARE AVAILABLE NOW AS WELL!!! WITH STEP--$335+ shipping WITHOUT STEP--$305+ shipping WITH STEP PLATE--$375+ shipping when ordering, make sure you specify what size slider, with or without step and SWB/LWBREAR BUMPERSSTANDARD-64" long 2"x4", 2" receiver, 2 d-ring shackle mounts$300+ shippingminus $15 for no 2" receiverminus $15 for no d-ring shackle mounts . Weld on DIY rear bumper brackets. $65 plus shipping. Front bumpers are coming FALL 2019! They will be available in a few different designs as well. You can order them with or without the brush guard or with or without the integrated hitch. Also will have winch bumpers available.HITCHES$225+ shipping (more info in the Hitch thread in the for sale section) I will try to answer any questions on here or through PM if anybody has any. **DISCLAIMER***If you purchase a fully built hitch, rear bumper or set of sliders, i accept NO responsibility or liability on any of them. once shipped, any failure or problems with performance due to misuse is the buyer's responsibility.Once anything is installed I accept NO responsibility or liability. For liability purposes, hitches and bumpers are not load/weight rated. I cannot say that these can be used to pull or recover. if done so, this falls under misuse of the product and I am no longer liable. Thanks, Brandon S. Link to comment Share on other sites More sharing options...
johnj92131 Posted February 19, 2016 Share Posted February 19, 2016 Bo, You should also post a picture of the near stock rear bumper Krusty has made for his own truck. He is making one of those for me and I think at least one other person. It is both strong and very good looking. More importantly, it is available! Link to comment Share on other sites More sharing options...
shelbyluvv Posted February 19, 2016 Author Share Posted February 19, 2016 I knew he was making you one John but he will have to be the one to advertise that. Link to comment Share on other sites More sharing options...
krustyballer16 Posted February 20, 2016 Share Posted February 20, 2016 Before the page gets too deep, I want to thank Bo for all the information and motivation on these sliders and bumpers. Without him working with me I probably wouldn't have started any of this (at least not this soon) So big thanks to Bo! His set of sliders and bumper will ship out Tuesday! So hopefully he'll have pictures up soon! Link to comment Share on other sites More sharing options...
mikekaz1 Posted February 22, 2016 Share Posted February 22, 2016 Bo, You should also post a picture of the near stock rear bumper Krusty has made for his own truck. He is making one of those for me and I think at least one other person. It is both strong and very good looking. More importantly, it is available! id love to see that for sale! thats what i thought this bumper was going to be! Link to comment Share on other sites More sharing options...
Knucklehead97 Posted February 23, 2016 Share Posted February 23, 2016 How do the hitches fit on an FEY rear bumper? Link to comment Share on other sites More sharing options...
mikekaz1 Posted February 23, 2016 Share Posted February 23, 2016 I could be wrong, but I think they just hang lower under the bumper compared to the factory bumpers Link to comment Share on other sites More sharing options...
krustyballer16 Posted February 23, 2016 Share Posted February 23, 2016 How do the hitches fit on an FEY rear bumper? I don't remember for sure. I think someone has posted pictures of one installed somewhere on here. It fits I know that. Link to comment Share on other sites More sharing options...
Knucklehead97 Posted February 23, 2016 Share Posted February 23, 2016 I wish I could find the picture of how close it fits to the bumper. I just love the way the FEY looks and probably am going to end up getting it and one of your hitches. Link to comment Share on other sites More sharing options...
shelbyluvv Posted February 23, 2016 Author Share Posted February 23, 2016 I wish I could find the picture of how close it fits to the bumper. I just love the way the FEY looks and probably am going to end up getting it and one of your hitches. http://comancheclub.com/topic/48004-krustyballers-hitch-installed/ FEY with a Krusty hitch. Link to comment Share on other sites More sharing options...
krustyballer16 Posted February 23, 2016 Share Posted February 23, 2016 I wish I could find the picture of how close it fits to the bumper. I just love the way the FEY looks and probably am going to end up getting it and one of your hitches. I personally think the FEY bumper is one of the most hideous bumpers out there! But the hitch fits good up under it Thanks Bo Link to comment Share on other sites More sharing options...
Knucklehead97 Posted February 24, 2016 Share Posted February 24, 2016 It does look good under there. Seems to add a little protection for the bumper as well since it hangs down lower than the bumper. I"ve always loved diamond plate step bumpers... don't know what it is about them! Link to comment Share on other sites More sharing options...
88whitemanche Posted February 28, 2016 Share Posted February 28, 2016 That front bumper would be BOSS! I miss mine that I gave away with a trade.... Maybe make one with a hidden winch option? Everyone wants a hidden winch option.... Link to comment Share on other sites More sharing options...
krustyballer16 Posted February 28, 2016 Share Posted February 28, 2016 That front bumper would be BOSS! I miss mine that I gave away with a trade.... Maybe make one with a hidden winch option? Everyone wants a hidden winch option.... when i get caught up here in a month or so ill start looking at this bumper. there will probably be this version, a winch version and possibly a "hidden winch" version. Link to comment Share on other sites More sharing options...
500 MJ Posted February 28, 2016 Share Posted February 28, 2016 That front bumper would be BOSS! I miss mine that I gave away with a trade.... Maybe make one with a hidden winch option? Everyone wants a hidden winch option.... when i get caught up here in a month or so ill start looking at this bumper. there will probably be this version, a winch version and possibly a "hidden winch" version. Let me know if you need any measurements for that front bumper. It's an old JCR OFFROAD one, I have the bumper (with no hoop) on my MJ. Link to comment Share on other sites More sharing options...
krustyballer16 Posted February 28, 2016 Share Posted February 28, 2016 That front bumper would be BOSS! I miss mine that I gave away with a trade.... Maybe make one with a hidden winch option? Everyone wants a hidden winch option.... when i get caught up here in a month or so ill start looking at this bumper. there will probably be this version, a winch version and possibly a "hidden winch" version. Let me know if you need any measurements for that front bumper. It's an old JCR OFFROAD one, I have the bumper (with no hoop) on my MJ.Cool. It will be a little different but knowing the angles of the sides would be nice.I'll hit you up when I'm ready to start on them Thanks. Link to comment Share on other sites More sharing options...
krustyballer16 Posted March 17, 2016 Share Posted March 17, 2016 UPDATE: I have brought the back of the sliders out to "follow" the body line. I'm undecided on if I like them better then how they were before but I'm not the one that is buying them to put on my truck. You guys are so I adjusted them for you guys. I'll post pictures up this weekend when I'm back to them. As for how tight they hug the bottom of the jeep, that will stay the same. It is right at 1" below the body. I can't bring them up any more without changing everything. Or without customers cutting their pinch seam. So that part will stay the same. Thanks, Brandon Link to comment Share on other sites More sharing options...
krustyballer16 Posted March 21, 2016 Share Posted March 21, 2016 got drawings of the "stock" rear bumper done finally! hopefully tomorrow when i go into work i can have a program made to bend them out and get this bumper started for john! Link to comment Share on other sites More sharing options...
mikekaz1 Posted March 21, 2016 Share Posted March 21, 2016 stock style bumper! yaaaaaas Link to comment Share on other sites More sharing options...
87Warrior Posted March 21, 2016 Share Posted March 21, 2016 got drawings of the "stock" rear bumper done finally! hopefully tomorrow when i go into work i can have a program made to bend them out and get this bumper started for john! yes, Yes, YES! My 92 needs this! Link to comment Share on other sites More sharing options...
krustyballer16 Posted March 25, 2016 Share Posted March 25, 2016 update on stock style bumpers... a couple failed attempts (ones too big, ones too small) and ive got some kinda bad news... maybe.... these pieces are only 24" long... which i had broke on a little press (24" is max on this press) and i really need them to be 30" so the bumper doesnt look pieced together... after getting the drawings for the bumper the other day, the engineer set up the bigger press and said it was impossible to bend that shape on this press. so i had to go show him my original bumper and said it was broke on that press 2 years ago, so its possible... he came back with "well maybe we can do it 1 time..." It comes down to the tooling has to have extensions on it, but just on the 2 ends (~32" apart) and that means 32" of unsupported tooling... and they don't wanna take the chance of doing multiple runs with an unsupported tooling... so i will talk to the couple people interested and get an idea going.... still have a BUNCH of hitch plates left! somebody buy a hitch! have 2 sets of material for sliders left... Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 16, 2016 Share Posted April 16, 2016 END OF APRIL SALE!!! Sliders--- $25 off a set without the tube step $10 off a set with the tube step Rear bumper--- $15 off Hitches---$20 off complete hitch i know its not a huge discount/savings/sale but maybe itll help some people out a little bit. like ive said before, I'm not in it to make a huge profit, just to help members out. UNTIL END OF APRIL i have a 2-3 week lead time (might be more depending on orders) i do this in the little bit of spare time i have before work and on weekends. so everybody keep that in mind. Thanks, Brandon Link to comment Share on other sites More sharing options...
87Chief Posted May 6, 2016 Share Posted May 6, 2016 Any news on the front bumpers? How much, ect. Link to comment Share on other sites More sharing options...
krustyballer16 Posted May 6, 2016 Share Posted May 6, 2016 I haven't even started to look at them... Got a lot going on and decided to jump into the 2014-16 Cherokee market for a bit. It'd still be a couple months before I look at them... Sent from my HTC One M9 using Tapatalk Link to comment Share on other sites More sharing options...
krustyballer16 Posted September 4, 2016 Share Posted September 4, 2016 I made a facebook page for my business. I added some pictures to show what all ive done Check it out if you can Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now