RockMJ Posted March 19, 2012 Share Posted March 19, 2012 Jeff, thanks man! Got some more done on the MJ. Flat style flares are mounted up, decals are on, and she is 95% back together! And our first trip in the MJ was to Sonic. Good times!!! Just ordered up an intake setup, Delta Xenon Driving Lights, and KC LiteLocks. After that comes the 4" and 35" Toyo MT's RockMJ Link to comment Share on other sites More sharing options...
Geonovast Posted March 20, 2012 Share Posted March 20, 2012 :eek: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: Link to comment Share on other sites More sharing options...
MancheKid86 Posted March 26, 2012 Share Posted March 26, 2012 first comanche ive seen with the flat style bush wackers. looks damn good! mine got a new rear end out with the old in with the dana-44 rebuilt, re-sealed and with a pozi :banana: Link to comment Share on other sites More sharing options...
Blue88Comanche Posted March 26, 2012 Share Posted March 26, 2012 On my MJ: Ordered a new master Clutch cylinder and a new clutch line. On Dad's MJ: Replaced the break rotors and pads, replaced the wheel bearings, re greased everything with a grease fitting, mounted the track bar mount, modified WJ LCAs to fit the MJ, modified the front axle to fit the WJ LCAs, Re connected the front axle, replaced the front shocks, and replaced the steering dampener. I still need to order some ZJ V8 Variable rate Coil springs. Anyone with a Lowes store nearby, All Kobalt tools came with a lifetime replacement warranty no questions asked. just take the tool back to Lowes and they will exchange it with one that is in stock or will order another one if needed. I would check first to make sure that your store does it as well, but this warranty covers ALL their tools, not just hand tools like Sears and Craftsman. Our new Tool set Link to comment Share on other sites More sharing options...
dasbulliwagen Posted March 26, 2012 Share Posted March 26, 2012 Anyone with a Lowes store nearby, All Kobalt tools came with a lifetime replacement warranty no questions asked. just take the tool back to Lowes and they will exchange it with one that is in stock or will order another one if needed. I would check first to make sure that your store does it as well, but this warranty covers ALL their tools, not just hand tools like Sears and Craftsman. I bought some of their wratchets, and the first time I used the 3/8" one, it broke, got another one, it broke, did this 5 times with the 3/8 wratchet then got denied and given a phone number to call to get approval. Called the number, got a message saying to leave my info and I would be called back within 48 hours.... they never called back. I found my receipt, took it back again, asked for a manager, and got my money back. The 1/4" wratcht I got is doing great and I love using it, I just wish the other one was a s good. Sorry for hijack. Link to comment Share on other sites More sharing options...
MJ1337 Posted March 28, 2012 Share Posted March 28, 2012 Today I put in new linkage, wiper arms and blades to go along with my new windshield. Install took about an hour. Thanks to LEAD_NOT_FOLLOW for the DIY write up that made it really easy to accomplish. Link to comment Share on other sites More sharing options...
Vintage Posted March 29, 2012 Share Posted March 29, 2012 Replaced the front, driver-side u-joint over the weekend. It was a PITA, but looking back on it, was a lot easier than it could've been: And the reward was a shiny new one of these: :thumbsup: And applied this before work: :clapping: Link to comment Share on other sites More sharing options...
SW86 Posted March 31, 2012 Share Posted March 31, 2012 i don't about anybody else but i don't like the way that ujoint cap is still poking out a little. ^^^^ the trick with the is to tap them on each cap to loosen up the clips, then save yourself some trouble and buy the press from harbor freight. its 60 bucks and pays for its self each time you change a joint or ball joints. anyway. installed the spartan in the 8.25 today! i offically hate c clip axles now too :headpop: Link to comment Share on other sites More sharing options...
Zenobian_84 Posted March 31, 2012 Share Posted March 31, 2012 Went from this :headpop: To this. :clapping: Link to comment Share on other sites More sharing options...
RockMJ Posted March 31, 2012 Share Posted March 31, 2012 Received my Delta Xenon Driving Light kit today. Top quality product and I can't wait to get it installed! I also have 4 AEV Savegre wheels sitting in my shopping cart ready for purchase. RockMJ Link to comment Share on other sites More sharing options...
Vintage Posted April 1, 2012 Share Posted April 1, 2012 i don't about anybody else but i don't like the way that ujoint cap is still poking out a little. ^^^^ I assure, the cap was fully seated and all of my work was inspected by a mechanic afterward, hence the passed inspection. I appreciate your concern, though. :thumbsup: Link to comment Share on other sites More sharing options...
RockMJ Posted April 2, 2012 Share Posted April 2, 2012 Finally installed my Delta Xenon Driving Light kit to match the Delta headlights. Suckers are bright! I also installed my NOS washer sprayers and door linkage clips RockMJ Link to comment Share on other sites More sharing options...
RockMJ Posted April 2, 2012 Share Posted April 2, 2012 Just ordered up a set of AEV Savegre wheels for the MJ. Looking forward to getting these on! RockMJ Link to comment Share on other sites More sharing options...
relyt120 Posted April 2, 2012 Share Posted April 2, 2012 Changed plugs and wires, one of the plugs disintegrated when I was removing it :doh: ...guess it was time for new ones like I thought -oh yeah replaced the coolant bottle aswell Link to comment Share on other sites More sharing options...
SW86 Posted April 3, 2012 Share Posted April 3, 2012 finally put on the 33" mud grapplers on 16" pro comps. along with bilstein 5160s, JKS bar pin elimi's and upper conversion mount. 6.5 rock krawler coils and 6.5-8" RK track bar. still have a lot to do before the clubs spring run on 4/20. need to tweak the caster a bit but other then that good to go up front Link to comment Share on other sites More sharing options...
ComancheKid45 Posted April 5, 2012 Share Posted April 5, 2012 Got stuck in the yard :oops: Link to comment Share on other sites More sharing options...
SW86 Posted April 5, 2012 Share Posted April 5, 2012 thats why you always go 4wd! finally using that locker huh :D jk jk! got some goodies from Rob at 4wd. thanks man! Link to comment Share on other sites More sharing options...
ComancheKid45 Posted April 5, 2012 Share Posted April 5, 2012 thats why you always go 4wd! finally using that locker huh :D jk jk! Yeah, its weird reaching down for the transfer case shifter only to find there isnt 1! :rotf: Link to comment Share on other sites More sharing options...
RockMJ Posted April 5, 2012 Share Posted April 5, 2012 Looky what showed up today! Waiting on the rest to show up! RockMJ Link to comment Share on other sites More sharing options...
Blue88Comanche Posted April 5, 2012 Share Posted April 5, 2012 Looky what showed up today! Waiting on the rest to show up! RockMJ Link to comment Share on other sites More sharing options...
SW86 Posted April 6, 2012 Share Posted April 6, 2012 hood spacers installed :chillin: raised it up about an inch and half. should let out all that unwanted heat now Link to comment Share on other sites More sharing options...
Blue88Comanche Posted April 7, 2012 Share Posted April 7, 2012 fixed my clutch issues. for now anyway.. Link to comment Share on other sites More sharing options...
RockMJ Posted April 8, 2012 Share Posted April 8, 2012 Lost a bit of progress today on the Jeep. Reverted back to the stock p225's. Low rider is a little higher lol RockMJ Link to comment Share on other sites More sharing options...
Paul Bruchal Posted April 8, 2012 Share Posted April 8, 2012 hood spacers installed :chillin: raised it up about an inch and half. should let out all that unwanted heat now Thats a crazy good idea :cheers: I know Hondas do that because of ther engine swaps. Engine is too big?? Use hood spacers! Link to comment Share on other sites More sharing options...
Paul Bruchal Posted April 8, 2012 Share Posted April 8, 2012 Tired of the saggy headliner.... $12 fabric + $10 3M Fabric Glue= Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now