comanche12 Posted January 10, 2012 Posted January 10, 2012 My mj is still on sale. I bought "new" used 1998 Subaru impreza 2.5rs coupe 5 speed. Time to strip it down!
cody4359 Posted January 10, 2012 Posted January 10, 2012 My mj is still on sale. how much off, 15-25%? or is it for sale not on sale :D
RockMJ Posted January 11, 2012 Posted January 11, 2012 Just ordered up a 12 LED flush mount third brake light for the MJ. Simple two wire hook up and its all waterproof and sealed from the elements. Looking forward to getting it! RockMJ
mvusse Posted January 11, 2012 Posted January 11, 2012 Ordered a new Alloy USA chain for the transfer case. (Purple People Eater).
ncmountainMJ Posted January 15, 2012 Posted January 15, 2012 new radiator, water pump,tstat, converted to late model cooling system, cleaned ground points, added another 4g ground to block and 6g to body, new solenoid on starter, new 4g starter wire...... and still not finished....
RockMJ Posted January 15, 2012 Posted January 15, 2012 Finally got the correct o-rings to fix my leaking fuel rail. Thoroughly cleaned the injectors and ports and the MJ is running MUCH better now. Also, ordered up some goodies for her as well :clapping: RockMJ
Blue88Comanche Posted January 16, 2012 Posted January 16, 2012 Moved the Dana 44 from Dad's MJ to My MJ :yes: Just need to put the axle back on dad's MJ
RockMJ Posted January 16, 2012 Posted January 16, 2012 Any reason you didnt degrease it and slap some paint on it? Jealous though :D RockMJ
cody4359 Posted January 17, 2012 Posted January 17, 2012 spent about an hr jeep drifting in snowy parking lots, then picked up another spare tailgate for $20 and a ARB tire inflation kit for when i install the compressor, and ordered a 41 tooth speedo gear
Paul Bruchal Posted January 17, 2012 Posted January 17, 2012 New bumper for my flatbed MJ!!! and LED taillights!!! 48"x8"x1/4" thick! with 30" angle iron on the back for support. Sand Blasted the brackets too, rusty/ old under coating. 2 cans of flat black paint on brackets and bumper when it got home. Next, angle iron along the sides and wood for the bed floor then roll cage over the bed.
89Comanche4x4 Posted January 17, 2012 Posted January 17, 2012 i put my new chrysler 8.25 under the rear all paint up, bolted it all up and did the brakes! no just need to bleed ;)
RockMJ Posted January 17, 2012 Posted January 17, 2012 Received my LED third brake light in the mail. Now I just need to tint it and get it mounted and wired. Cannot wait! RockMJ
Blue88Comanche Posted January 19, 2012 Posted January 19, 2012 Received my LED third brake light in the mail. Now I just need to tint it and get it mounted and wired. Cannot wait! RockMJ :redX: Pics?
jpdriver1 Posted January 20, 2012 Posted January 20, 2012 Received my LED third brake light in the mail. Now I just need to tint it and get it mounted and wired. Cannot wait! RockMJ :redX: Pics? and supplier details
cody4359 Posted January 20, 2012 Posted January 20, 2012 finally inflated the tires from 10 psi to 35. too lazy since my snow trip two days ago
Blue88Comanche Posted January 20, 2012 Posted January 20, 2012 Took my rear Drive shaft to be shortened
mvusse Posted January 20, 2012 Posted January 20, 2012 Parked it in a heated shop to thaw out and dry up so I can work on it this weekend or next week.
RockMJ Posted January 21, 2012 Posted January 21, 2012 here's the third brake light. It has 12 super bright red LED's to help the elderly in FL see my Jeep lol. Here are some pictures, it measures 7" long by 1" tall and 1" wide. Pretty slim setup and I'm really happy with how bright it is. Ill have to post pictures of it all finished up later. It also has a rubber gasket with it and it is a flush mount setup Sorry about the pictures being a bit dark, ill get some better ones later. I bought it from autolumination.com. They have a ton of different styles and sizes, but I wanted something smaller with great light output! Very happy so far RockMJ
cody4359 Posted January 21, 2012 Posted January 21, 2012 bought some corbeau sliders, masterpull recovery rope, and 3/8"x100' superline. i love ebay
RockMJ Posted January 21, 2012 Posted January 21, 2012 Here are a few pictures of the 3rd brake light mounted RockMJ
RockMJ Posted January 21, 2012 Posted January 21, 2012 Cleaned up a few parts and its amazing what a little paint can do RockMJ
cody4359 Posted January 22, 2012 Posted January 22, 2012 put in a new CB, didnt help my SWR readings, new 4' tunable antenna-still didnt help much. realized my readings went from good when the cb was on the passanger seat then all wacky when it was mounted behind the center console. guess ill be drilling more holes and mounting it on the side of the console :ack:
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now