-
Posts
25 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Zenobian_84
-
Project "Honcho" - The '87 MJ
Zenobian_84 replied to Zenobian_84's topic in Member Projects: Your Comanches
Thanks; enjoying scrolling around when I get some downtime at work and seeing the creative things that members are up to nowadays. Yeah; had my eyes on that one for a long time, but the way I usually used to drive the MJ left me about 2-3 car lengths behind someone to make the stop. Not that it didn't lock the brakes up going 50% or more on fresh brakes... -
I'm a huge sucker for those old checkerboard patterned door panels. Looks great!
-
Very Lucky Facebook Marketplace Find
Zenobian_84 replied to Backpacker's topic in MJ Tech: Modification and Repairs
Lucky; I had to spend about $900 to Snap-On for the appropriate "Master Set" of OBD1 connectors for about every US/Asian/Euro. vehicles that were made for the US. Coincidentally, the kit labeled the "Renix" connectors as "Chrysler". Can't even put the respect on AMC's name. Course, the price has probably gone up since I purchased it back in 2018(?) -
FWIW, if your truck never came with one, you could make one out of 1/8 hardboard from Lowe's, Home Depot, etc. and grab some appropriate colored carpet to glue / staple to the hardboard and make your own. Essentially, I did this many years ago with my door panels when the original backing "board" gave out from years of abuse and neglect from POs.
-
Bringing a RX-135 Radio Back to Life
Zenobian_84 replied to MagicJames's topic in MJ Tech: Modification and Repairs
Nice writeup! I would have loved to have this as a reference about 10 or so years ago when I was actively searching for a handful of the old "DNR" / AMC headunits to refurb. and keep for my MJ.- 13 replies
-
- factory radio
- rx-135
-
(and 4 more)
Tagged with:
-
Project "Honcho" - The '87 MJ
Zenobian_84 replied to Zenobian_84's topic in Member Projects: Your Comanches
Wow, how time flies. Been a long time coming, but better late than never, I suppose. Eventually, at some point this weekend, I'll upload some pictures of the old girl, after I wash it, of course. It's definitely seen better days. Been off the road for some time now; was still regularly being as a daily until around 2023(?) I want to say; got another SUV to replace it with as a new daily (96 GMC Jimmy) to which I've basically rebuilt completely except for a few things on the front end. Life got busier; finally tied the knot with my wife almost 2 years ago after being together for over 12 years now. Been pretty consistent with jobs; left the dealership life a few years ago to an old job I used to have wayyyy back when when I first started out, but as a lead mechanic now. Life is pretty good, aside from not enough money, but what can you do, right? Welcomed a little girl into our lives a little over a month ago, so she's definitely keeping us on our toes. As far as the Comanche goes, it's in a pretty sorry state, all things considered. Paint still looks relatively good on it (TOTALLY NOT AN ADVERTISEMENT FOR INDUSTRIAL, BARN-GRADE PAINT ), but I removed the transmission out of it because the slave cylinder went, AGAIN, shortly after I got the GMC. As it currently sits now, I have the trans. apart waiting to be rebuilt at my shop, or at least, I WAS going to rebuild it, but now looking at the state of the truck as it is currently, I'm fairly certain the original 2.5 still in it will need a modest rebuild before it was to go back onto the road. Been mulling over selling it, as it has a lot of sentimental value to me, especially now with both of my parents having been passed for some time now; it was one of the last real things they helped me out with buying before I lost one, then the other almost 10 years later. But realistically, I have to thin the collection, rather than let it sit and fester for who-knows-how long. Current plan is to probably cut the cab off the truck and part what's left from the cab-forward, and turn the frame / bed into a small utility trailer when I have some free time early next year, unless something changes. Second option is to either part it, or sell it completely with the additional collection of parts and things I've hoarded for it over the last 15 years. However, only time will tell. Still mulling over the options with the little free time I have between work and family these days, but other than that, life is going alright. Hopefully no one's been waiting for a long-form update on this thing, but you never know. -
Renix Era 2.5 AX4/5 Flywheel (86-90) - Central FL
Zenobian_84 replied to Zenobian_84's topic in Wanted
Still on the hunt. -
Thread resurrection from beyond the grave, but I'm still kicking around. I don't have much in the way of time to do as much now that I've been bouncing up the ladder from shop to shop the last 8 years or so. Now that I'm mostly settled back down, I might go back to doing some of these again, but I can see that SoCalJeepComanche has a good thread dedicated to most of the signage / decals from production trucks. I'd say "never say never", but at some point I might update with some new designs or go back to finishing some of the ones I was in the process of doing.
-
Hello friend; Pete sent me a message letting me know. Dunno how much you're looking to get, but if you're looking to get rid of it, 'll try to make it happen!
-
I'd say the 86 3-tone striped trucks are pretty rare; I've personally only ever seen one running around down here in the southeast, some years ago, and maybe one or two that a member had on the forums throughout the years. I'll always be a sucker for the "Chief" paintjobs; I always thought those were sharp.
-
About 100k miles back when I first got my MJ, I would average around 115-130 miles on a quarter of a tank of gas. Not bad for a primitive pickup. I second the idea for a flat-bed. It wouldn't look bad if done right, honestly.
-
Looking to get my hands on a secondary flywheel for my Renix era 2.5 transmission. Until I get around to doing a complete drivetrain swap at some point in the next decade or so, anyway. Local pickup preferred, but shipping would be to 32736. Something that hopefully doesn't have 300k+ miles on it would be preferred, but let me know what you've got.
-
Renix Era 2.5 Flywheel
Zenobian_84 replied to Zenobian_84's topic in MJ Tech: Modification and Repairs
10-4; thanks bud. -
Renix Era 2.5 Flywheel
Zenobian_84 replied to Zenobian_84's topic in MJ Tech: Modification and Repairs
From what I can tell from the last time I put one in, is that the friction disk was fine; the flywheel itself had a few hot spots, but like previously mentioned, it's never been resurfaced. It has been the slave cylinders that have failed the last several times I've had to pull the trans. The last being on Christmas day of last year, to which the slave lasted all of 6 months before failing again after a 20 mile jaunt on the interstate going 60. Pulled off the interstate on my exit and noticed it had that pedal "judder" like a bearing going out. About a week later, it developed an internal leak and lost all pedal pressure. I don't doubt that my flywheel itself is either out of spec, or high-spotted, but I was mostly curious as to whether or not someone has had any luck finding a replacement in the last 5 or so years I've been on / off the site. Sadly, most of the junkyards down here in the southeast are getting devoid of these trucks / setups. Renix era ANYTHING at this point is becoming a hard thing to find; luckily I have made a good stash the last 10 or so years of frequenting yards to hold onto the things I know don't exist in any fashion anymore. Sadly, the oversight of pulling flywheels when I had the chance wasn't one of the things I was super concerned with doing. -
After doing a bit of research on this, I've come to the conclusion that any flywheel found online listed as "NEW" or "FITS" the Renix era trucks (86-90) is probably wrong. Spent around 10 years give or take DD'ing my truck, and along with 10 years of use and abuse, I've gone through around 4 clutch kits (2 friction disks, and 3 internal slaves). Never had the flywheel resurfaced in the 10 years that I owned it, and am pretty sure the last time it saw a machining was when it was originally made in 86-87 to be put on the truck in production. I'm currently in the process of bringing the truck up to the dealership I work at (Kia, sadly), so I can pull the transmission and flywheel out to take it to a local shop to see if it's still in specification to be turned. Sadly, I no longer have any contacts at the Chrysler dealer I used to work at, as the 2 friends there who had originally started at AMC and then merged into Chrysler retired in the last year or so, so I can't pick their brains to find out what the specs on the flywheel are for resurfacing; neither AllData or ProDemand have the specifications listed aside from torque values, and I do not have an FSM to reference. My question is thus: Are there any reputable sellers of a 2.5 Renix era flywheel left out there in the world? Aside from some dubious listings on ebay, I have not been able to locate any, and am sadly left with thinking that the only replacement would be a lucky find out in the world, or buying one secondhand. I remember the thread JeepDriver made about a possible mass buying of a company he had reached out to that was willing to make some, but it died due to lack of large interest.. I assume the listings for the 91 and up flywheel are because of a different bolt pattern to the newer MPFI 2.5 engines, or perhaps because they went to a concave design of the flywheel instead of a flat one like the Renix era trucks have?
-
Not Running for longer that a few minutes
Zenobian_84 replied to Warren99's topic in MJ Tech: Modification and Repairs
IMO, I would keep an eye on it; worst case scenario, they are normally available at the parts stores. When I had my stint up at Chrysler for 6 months a while back, I worked on a guy's old 88 who bought it brand new. Was having some of the same issues you described (along with a slew of other issues due to being a Michigan truck for close to 20 years), and found out that the posts inside had a lot of corrosion on it, along with finite cracks on the ceramic assy. itself, causing some intermittent stumbling and rough starting when trying to crank. Replaced that and some of the vacuum lines on the engine and eliminated the issue. Originally they were put in place as a noise reduction piece for the fuel pump, and without it, you can hear the pump "whirr" louder when running. If you don't want to replace it down the road, just splice the leads together and shrink wrap it to keep moisture out. -
I wish; worst case scenario, I'll clean it up and throw some sealant on it. Was told that the rubber seal around the glass was cracked and frayed from the FL summertime sunshine. I assume that's why the duct tape was put there to "seal it". Like I said, I haven't pulled the tape, because I didn't want the water to come streaming in. I'm sure the tube seals are probably clogged as well. Going to scope out the pick and pulls down here this weekend and see if I can find a replacement. If I'm lucky they'll have a WJ and ZJ I can take measurements of.
-
Have had my '95 Orvis ZJ down for a while now doing work rebuilding the transmission, and was going to pull the interior to take a look at what the PO described as an "inoperative, and leaky" sunroof. Was told the gasket failed, as it has reflective duct tape around it, but I have not yet pulled it. Had to fix some of the holes in the roof anyway, and got all the leaks sorted out, (major, anyway). Question is, if the track / sunroof assembly is junk, are the WJ assemblies and sunroofs the same as the ZJ's? I just helped a buddy strip one WJ to put everything into another, and that got me thinking that near everything seems similar; but I have not had a ZJ apart like that in some time and cannot remember if this is true or not, sans wiring, probably. The SR gasket is no longer available anywhere, and I have no idea if the motor is still good (was handed a box of parts with the ZJ when I got it, extra security modules, FOBs, etc etc) and was told it "works", but haven't verified it since I owned it. Did some digging around and was informed at one point that the early 2000s Ford Escape sunroofs have a similar gasket, but it's a much tighter fit. Not sure I want to spend over a hundo to find out for sure though...
-
I feel you brother; life is pretty rough down here in the southeast for the dealer guys as well, so don't feel too bad about things out in the west. From what one of the independent tool-truck guys told me about the 5 dealerships he goes to on the weekly, some have "laid off" upwards of 15 people, with more to be out the door soon if business doesn't pick up for this "essential" trade. I work for a non-dealer shop, but worked at both Ford and GM once upon a time, so I know how hectic things can get.
-
Insanely jealous; those lights are pure sex. I keep kicking myself for passing over a SWB roll bar some years back due to lack of funds... Really just need that to complete my build, along with a factory brush guard.
-
Project "Honcho" - The '87 MJ
Zenobian_84 replied to Zenobian_84's topic in Member Projects: Your Comanches
Back from the land of the living. Proof that I still have this old thing. Gotta take it up to the shop here in the next few days and re-wire the rear license lights. Shoddy wiring from almost ten years ago by yours truly, lol. Back when I was a lot greener with a wrench, besides. Might get the audio in my video struck out, but you can just listen to this while you watch the video if you feel so inclined. It'll have the same effect. Text below is the link to the video. If I could figure out how to embed the file, I would, so sorry about that, chaps. -
Project "Honcho" - The '87 MJ
Zenobian_84 replied to Zenobian_84's topic in Member Projects: Your Comanches
-
Project "Honcho" - The '87 MJ
Zenobian_84 replied to Zenobian_84's topic in Member Projects: Your Comanches
Thanks guys, it feels good to be back. Didn't mean to be gone after the last time I resurfaced, but life, and mostly work robbed me of a social life and most of my free time. I actually got the idea for the B pillar badges from a few J10's I saw in the junkyard once. Seeing as I don't have 4x4 at the moment, I figured it would be a good fit for them. Even though some purists put the 4x4 badges at the end of the bed. -
Power Steering Pump and Gearbox Replacement?
Zenobian_84 replied to WahooSteeler's topic in MJ Tech: Modification and Repairs
Lares is pretty good; I've used a few at some of the shops I've worked at when I could convince my service manager to spend the extra money to avoid having comebacks with the "parts house" remanufactured garbage ones that Autozone and O'Reilley's sometimes ship out. Although I would see if you could get a beefy ZJ one; although I'm not sure there's a physical difference, although there is a "high" assist steer option in some of them (longer high pressure lines, not sure about actual increase in turn ratio). Although I'm not sure if that option is for the 5.2's only, or if the 4.0 optioned ZJ's had that as well. If you were looking to rebuild the gearbox, I have done one before on my fiance's XJ, and another on my 84 Trans Am when we had them; they are both basically the same part set (o-rings, snap rings, gaskets, etc etc) as any other GM Saginaw styled box from the eighties to mid nineties. There are "special" tools you need (preferably a bench vise, snap ring pliers, etc etc) and some special fitment procedures to take into consideration when rebuilding one, but there isn't much to them. Took me about an hour, and that's with cleaning the box and installing new lines as well; hard, but not impossible to do as long as you don't mind getting dirty and keeping track of small parts that may fall out of the box itself (ball bearings). And as others had stated, there are nitrile o-rings at the pump fitting and gearbox fitting ends of the high pressure line. Worn o-rings at either of these can cause seepage over time, and they're easy to replace. Just be sure to put a drop or two of power steering fluid on them so they don't tear when you install the fittings onto the pump / gearbox. -
Project "Honcho" - The '87 MJ
Zenobian_84 replied to Zenobian_84's topic in Member Projects: Your Comanches
May seem weird, but it is me, back again from the "near" dead. Been a crazy few years, and I seem to have forgotten my old email and can't access my old account for reasons. So, I decided to make a new one. Hopefully I'll stick around longer this time, and not drop off of the face of the earth again. Last time I got wind of CC news, it was the passing of Jim and Don, so that put a damper on my mood when I learned of it. Still have the '87, although it's seeing far less use these days. Had a good time having it as a DD for nearly a decade, but I finally got another truck to take it's place, so now it's basically on permanent backup duty to myself and my fiance. Still hoarding parts for it and all the other cars in the corral, although I no longer have the 92 Cherokee, or my 84 Trans Am (first lost in a head on collision accident, the other sold to make room during a move to a new house). Spent a long number of years now it seems honing my craft working in different shops, and even worked for Big Blue Oval for a little over a year. Although now I'm working currently for Firestone as one of the "lead" mechanics of my shop, so there's that at least. Will post some pictures of the fleet here soon, maybe by the weekend if the weather holds up and I get around to washing them; my trucks are in a pitiable state, if you were to look at them from the street. Still running great though, irregardless. As of currently, the MJ has: Had at least 6 replacement starters put in (over 10 years) Had 4 new radiators (within the last 4 years, cheap Chinesium failed parts), new water pump, fan shroud, (bi-yearly tune up) thermostat, every radiator / heater hose replaced Output shaft seal done (secondary inner-output seal leaking however), along with a few other seals. Yearly tune ups, fuel filters, etc etc done. What the MJ currently needs: New shocks all the way around (leaking and cupping tires) Clutch return line (rubber failing and becoming brittle, still holding good pressure however) Front bearings (repack) Rear differential pinion seal (started going out when I was driving 50+ miles a day working for Ford) Rear drums and hardware (STILL driving on the original drums I bought it with 10 years ago!) Master cylinder / brake booster (booster is working as is, master cylinder has a leak at the rear cup seal, not going into the booster or down the firewall) Probably some other things as well, but those are mainly the pressing matters. So all in all, a decent amount of stuff to do. Also, after nearly a decade of owning this thing, and being a member for well over 5, I FINALLY took Pete's advice and PULLED MY RUBBER FLOORING OUT to see how bad the floorpans are. Well, I should say were, because there was basically nothing left at this point. Cut out about all of the bad, and slathered anti-rust Ospho onto them, and then covered what was there with bedliner before I laid some sheeting down as a "temporary" fix until I take this thing off the road for good and redo it top to bottom. Word of wisdom there is to PULL YOU CARPET when you get your truck(s), because PETE IS RIGHT! So if you read people screeching about this issue, take it from me, they're speaking from experience themselves.
