fiatslug87

Why does that picture have a SOA configuration if it’s an MJ?

Here’s how you can tell the year of the engine block.

Those look GREAT!!!

Page 9

From eBay

Congrats, make sure to add it to the registry.

Just be aware the above wheel is “deeper” than XJ/MJ wheels and will position it closer to the seat.

Get yourself a nickintime design Renix Engine Monitor, it shows the TPS value so you can easily adjust it to the ideal 17 at idle. Also very useful in checking other engine functions including O2 sensor.

They are the same and there was a bumper there. Look for a flat piece of metal with a hole in it on the kick panel side. The parking brake pedal has a flat spot that lines up with it when released. #23 in the diagram, PN 83505579.

February 2025 update, see first post. 4 new additions this month for a total of 2358.

already here

@Pete M yes, the neck is narrow in one dimension. These are the correct PN from the parts manual for that panel.

Yes, I think. I can take a look tomorrow.

https://www.summitracing.com/parts/cwa-34201545

Found it in a previous post.

Summit Racing has them. I can get you the PN tomorrow when we’re back home.

There's a cut-away pic in this post.

We’re at New Hogan Lake in Calaveras County, CA. Lots of loud geese out here, gives the dogs something to chase. The step is working out great for both dogs and humans. Got a little Mr. Heater Portable Buddy heater to lessen the morning chill in the WilderNest, runs on propane. Weather is nice, 70° and blue skies.

Cluster has to be removed. The tach is attached with three screws from the back which also create the contacts.

Practicing for tomorrow.

Yeah, probably don’t have the email from two years ago, I like to purge.

@damianriel The latches were from Amazon: https://www.amazon.com/gp/aw/d/B08S1DV8TZ?psc=1&ref=ppx_pop_mob_b_asin_title All the other fasteners were from McMaster-Carr. I can’t seem to see my orders at this time, I’ll call them to see if they can get me the info and add it to this post. EDIT: 2 packs 95639A331: Oval Head Screws 316 Stainless Steel, Number 6 Size, 3/4" Long for belt molding 1 pack 91525A130: Washers 316 Stainless Steel , Oversized, 5/16" Screw Size, 0.344" ID, 1.5" OD for pivot points 1 pack 94155A115: Square-Drive Rounded Head Screws 18-8 Stainless Steel, Number 8 Size, 1/2" Long for hinge bumper attachment 2 packs 92141A009: Washers 18-8 Stainless Steel For Number 8 Screw Size, 0.172" ID, 0.375" OD for tent and hinge bumper attachment 1 pack 94155A119: Square-Drive Rounded Head Screws, 18-8 Stainless Steel, Number 8 Size, 3/4" Long for tent attachment 2 each 94975A461: 18-8 Stainless Steel Ring-Grip Quick-Release Pin With Lanyard, 5/16" Diameter, 1-3/8" Usable Length 2 each 94975A465: 18-8 Stainless Steel Ring-Grip Quick-Release Pin With Lanyard, 5/16" Diameter, 1-5/8" Usable Length 2 each 94975A483: 18-8 Stainless Steel Ring-Grip Quick-Release Pin With Lanyard, 5/16" Diameter, 2-3/16" Usable Length 5 each 1513A59: Mortise-Mount Hinge With Holes, Removable Pin, Round Corner, 304 Stainless Steel, 4" x 2" Door Leaf 1 pack 90715A011: Nylon-Insert Locknut 316 Stainless Steel, 10-24 Thread Size for hinges 5 packs 90585A252: Hex Drive Flat Head Screw 316 Stainless Steel, 82 Degree Countersink Angle, 10-24 Thread Size, 1-1/4" Long for hinges (cut off excess) 1 pack 92141A011: Washers 18-8 Stainless Steel For Number 10 Screw Size, 0.203" ID, 0.438" OD for hinges Other fasteners for cable and frame attachment were sourced locally since only a few pieces were needed.

XJs/MJs that came with fogs had a headlight harness that also had the fog light wiring and relay as part of it.

A new tent for it is over $2K, mine cleaned up really nice after a couple oxy-clean soaks. See the WilderNest Trailer link in my signature.