jdog
-
Posts
5121 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Everything posted by jdog
-
someones concoction for a oil pressure light and and a gauge, if you want to keep it, split it apart and clean and seal the threads, not sure why they put a shut off valve in there tho.
-
It should be the one in your hand, can we see a picture of the harness you got. no need to appologize
-
Going down a hill with a back wind
-
https://www.quadratec.com/p/omix-ada/door-lock-cylinder-kit-76-90-jeep-cj-cherokee-xj-wrangler-yj Or you can use the newer lock style with the double-sided key, just be careful as not all are the same size,
-
Picture of what your looking for? Different people call things different
-
anybody got any desserts?
-
I've got a parts cluster that has a working fuel gauge if you want to swap it out
-
did you grab the tow hooks?
-
That's the one, two wires run to the trans, the other are jumpered together
-
Wish I had a answer for you, I have not used them so I cannot say
-
Build day April 19/05
-
Yep, factory 2wd
-
thats up to you, only way I know how to check it is with a scanner.
-
Check the 02 sensor Also fuel pressure
-
Ashtray for the cup holder and a cig lighter. We got a few in rental cars, always strange
-
-
https://youtu.be/HtkGluLhnGU
-
hey Pete have you added this to the registry yet? -
But it should be a four pin weather pak to a two pin connector, the other two wires on the weather pak is a jumper
-
Slow cranking, good battery & alternator
jdog replied to hakukamana's topic in MJ Tech: Modification and Repairs
What about a voltage drop across the starter, pos. To terminal, neg to case. -
I don't
-
There should be a jumper wire to go from the connector to the switch
-
Right side of the engine should be near the firewall and heater hoses, there will be a plug
-
that sucks the bank still owns it, but good to hear its not going to the crusher