Pete M

Ooooo, that would be sweet to have a fancy themed fire pit!

Most everyone that gets new leafs gets more than they expected. They will settle some though. If you can, I would do rear first. But then pucks are an easy addition if the front needs a bit more. Mounts welded to the tube allow you to place them where they work best. The stock parts are quite restrictive in that aspect.

So far so good. all parts have been dropped off at their new homes. Got to spot a carrier while on the ches bay bridge, and then 2 more in Norfolk. Not sure what else was in my field of view, but it's hard to miss the flattops.

@eaglescout526

6x12. It has a tailgate on the back. If you need a full ramp, be aware the other 6x12 trailer narrows at the back. I'm using plywood as a ramp on the tailgate version (otherwise the beds don't fit) The journey continues.. now with twice the mpgs as the start! :D.

It's now on the list!

The sounds of nature soundtrack. Specifically the rain Probably all night too.

Will do. Dropped off bed #4 so I finally got to lay the last one down and make use of my rearview mirror. I'm holed up in a Walmart lot for the night listening to the rain. It's not half bad (if I wasn't wedged in the back of a Durango with a bunch of parts. Lol I did score 3 late XJ headers, early KJ renegade flares, and various tow hooks.

Made it to Syracuse. Got a couple yards to hit to tomorrow on the way east.

Can someone with a better internet connection try to find what these go to? E19 84241 E29 93727

and I'm off again. next stop, Pull-a-Part Cleveland! (mostly because it breaks up a long drive day) but after that, Niagara Falls!

and these. I'm assuming that 91-92 are the same profiles. https://www.ebay.com/itm/391545834945?hash=item5b29f34dc1:g:MckAAMXQHPFRhePi

they seem out of stock. but I did find these: https://www.ebay.com/itm/283945342334?hash=item421c76157e:g:~bEAAOSwsA5a32iX

I don't remember anyone mentioning interference with the ZJ swap. which makes sense to me since ZJs essentially use the "same" rims as MJs.

looking forward to it. shame about the rollbar, but at least it's a straight forward fix

I think it's super early 87s that have that?

why do the rollbar mounting plates not line up?

on ebay

changed

one of the MJs I found in FL. not sure of the year.

one of the MJs I found in FL. not sure of the year.

one of the MJs I found in FL. not sure of the year.

remove them carefully. I'm someone will have need of them.

you replied in the "max beds" thread and on tuesday I'll be in full-on parts-replenish mode