H3ADBANG4L1F3 Posted August 1 Author Share Posted August 1 10 hours ago, eaglescout526 said: What kind of test fitting do you need? I’ve got an 86? Maybe 87 air box with AC, minus the core to test and a heat only box from my 88. But I'm guessing you need test fits in the dash too. Full installation test fits. Everything fits on the heater box but there seems to be a bit of variation on certain seals. A-Man and ghetdjc both have a different height seal for their fresh air intake than myself. Theirs is 3/4" tall and mine is 1.5" tall. Curious to see if there are any other variations out there and if they're specific to certain year models. Link to comment Share on other sites More sharing options...
H3ADBANG4L1F3 Posted August 7 Author Share Posted August 7 Any other interest in test fitting? I haven't had many reach out! Link to comment Share on other sites More sharing options...
Warthog Posted August 8 Share Posted August 8 On 3/7/2024 at 8:29 PM, H3ADBANG4L1F3 said: Lmao. Once I put the heater box back in and make sure everything fits I may gauge interest to see how many would purchase them. I think they'll fit all (or at least most) 96 or below Cherokees/Comanches. I need two sets! A comanche and an xj! Say when! Link to comment Share on other sites More sharing options...
Warthog Posted August 8 Share Posted August 8 9 hours ago, H3ADBANG4L1F3 said: Any other interest in test fitting? I haven't had many reach out! Yes me!!! Hell I’ll pay for em. Link to comment Share on other sites More sharing options...
H3ADBANG4L1F3 Posted August 8 Author Share Posted August 8 5 minutes ago, Warthog said: Yes me!!! Hell I’ll pay for em. Lol I'll PM ya Link to comment Share on other sites More sharing options...
ghetdjc320 Posted August 8 Share Posted August 8 On 6/7/2024 at 11:02 AM, H3ADBANG4L1F3 said: Playing around while waiting on those other seals. Just printed on foam for now, rubber will be next. Any updates on these? I’ve got the dimensions and vector traced files for these and the MJ rears as well if you want them. Link to comment Share on other sites More sharing options...
H3ADBANG4L1F3 Posted August 8 Author Share Posted August 8 37 minutes ago, ghetdjc320 said: Any updates on these? I’ve got the dimensions and vector traced files for these and the MJ rears as well if you want them. Those would be nice to have for sure! Easier than making them myself lol. Unfortunately when trying to cut the rubber for these our machine just couldn't hack it. It needs a new laser tube and perhaps afterwards it will work. Otherwise I'll need to explore other options, but I have some ideas! Link to comment Share on other sites More sharing options...
RustyRodder Posted August 12 Share Posted August 12 Wow, this is great- I just pulled a replacement dash for my faded and split one. Ill hold off doing the swap until these (hopefully!) start being sold. Link to comment Share on other sites More sharing options...
H3ADBANG4L1F3 Posted August 12 Author Share Posted August 12 32 minutes ago, RustyRodder said: Wow, this is great- I just pulled a replacement dash for my faded and split one. Ill hold off doing the swap until these (hopefully!) start being sold. Shouldn't be much longer. I'm sending out some for test fittings and then waiting on feedback. Ran out of some foam though - will be a few days for another shipment. Link to comment Share on other sites More sharing options...
Brewinghokie Posted October 9 Share Posted October 9 Any update on these? Link to comment Share on other sites More sharing options...
H3ADBANG4L1F3 Posted October 9 Author Share Posted October 9 6 hours ago, Brewinghokie said: Any update on these? I'll be offering them shortly! My test fitters have given some excellent feedback. May need to iron out a kink or two here and there but we're looking good. Link to comment Share on other sites More sharing options...
89 MJ Posted October 9 Share Posted October 9 Glad to see that these are about ready for production. I’ll probably need a set Link to comment Share on other sites More sharing options...
RustyRodder Posted October 10 Share Posted October 10 Ill def be in for a set. Link to comment Share on other sites More sharing options...
Brewinghokie Posted October 10 Share Posted October 10 18 hours ago, H3ADBANG4L1F3 said: I'll be offering them shortly! My test fitters have given some excellent feedback. May need to iron out a kink or two here and there but we're looking good. Love it! Getting ready to do the heater core and ideally only want to rip everything out once lol Link to comment Share on other sites More sharing options...
Warthog Posted October 11 Share Posted October 11 Hit me with price and how to pay brother! Need one more for the cherokee! These rock! Can never thank you enough brother! Link to comment Share on other sites More sharing options...
coheed Posted October 11 Share Posted October 11 Definitely interested in a set of these since my truck is stripped for floors anyway. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now