Jump to content

Recommended Posts

Posted

Looking to take mine back off and go stock one or a boomerang set. My leafs are to worn for these shackles and reste axle wrap. But it did yield the lift I needed. 

  • 2 weeks later...
  • 3 weeks later...
Posted

Think itll stop? Might be time for the upgraded brake booster. Also need to fix the e brake the transmission won't hold on the hill. 

 

20210618_104810.jpg

  • 2 weeks later...
Posted

the MJ was a pretty good hauler when it was new. :D  problem is that none of our trucks are new anymore. :(  you're going to love the dual booster. :L: 

Posted

Got the new muffler and tail pipe on today. Not sure what brand they used but it sure is quite. So quite I hear every noise now. Happy i can start it in the morning without waking up the kiddos tho.

  • 2 months later...
Posted

I finally got around to figuring my gear ratio. It appears I have 4.56 gears. I got 4.5 rotations of the drive shaft per one rotation of the tire. I have 31" tires. Safe to say that's pretty low for the size of tires. If I didn't have 4 hours of freeway driving to my hunting camp I wouldn't complain as I'm mostly driving in town. 

  • 2 weeks later...
Posted

With almost everything in the front being new I was upset to feel a pretty good vibration above 35 mph. Maybe my tires are out of balance. One more thing to address before the big drive.

Posted
22 minutes ago, Pete M said:

front driveshaft?

It definitely could be. ill crawl under and check my next day off. I recall changing one U-joint maybe I didn't do both, would have been a bad decision. 

 

Thx

  • 3 weeks later...
Posted

Got a good reminder today. If you see an issue fix it before it breaks. I noticed a fuel line was starting to fray, did I fix it...nope. Few months go by. Filled up the tank and drove the kids to school today leaving a solid trail of gas and blowing my whole tank on the road. Just made it to the store for a fuel line. 

20211101_085210.jpg

20211101_085219.jpg

20211101_091032.jpg

Posted

Found a canopy for 20 bucks. Gets the job done but its rough. All the plexi glass is fogged or painted black. Makes it hard to check a blind spot. I have to reposition it later but itll do. Happy to have it. 

20211105_090120.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...