buxmj Posted March 11, 2014 Share Posted March 11, 2014 Couldn't resist showing off the bedslide Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 11, 2014 Share Posted March 11, 2014 That's a pretty slick way to haul pine bark. :cheers: Link to comment Share on other sites More sharing options...
buxmj Posted March 11, 2014 Share Posted March 11, 2014 Thanks Don, use it mostly to haul equipment, mostly drums. When I found the place to get free mulch I figured out how to not get it everywhere. The plywood "box" comes apart easily and gets thrown in the attic. Wish I had the bedslide the whole time I have owned the truck, smacked my head getting in and out so many times I can't even count. Link to comment Share on other sites More sharing options...
Incommando Posted March 11, 2014 Share Posted March 11, 2014 That's a pretty slick way to haul pine bark. :cheers: x 2 Link to comment Share on other sites More sharing options...
buffalob Posted March 16, 2014 Share Posted March 16, 2014 Still my best "poser" pic, I guess before the paint process started. Hopefully with warmer weather around the corner I can get beyond that and get her completeted. Link to comment Share on other sites More sharing options...
buffalob Posted March 16, 2014 Share Posted March 16, 2014 this one's not too bad....will be shooting paint on the trailer pretty soon, and will then swap the beds.....can't wait. Glad it is warming up again. you guys with garages don't know how good you got it. Link to comment Share on other sites More sharing options...
Jeepman Posted March 16, 2014 Share Posted March 16, 2014 Here is mine... Still a work in progress.. Image Not Found Image Not Found Image Not Found Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 16, 2014 Share Posted March 16, 2014 She is gorgeous. :cheers: First time I've seen Bushwackers? on an MJ that really look good. And the updated front end looks even better with the cowl hood. You got me thinking now. The only thing I'd change is the Fey rear step bumper. It just doesn't look worthy enough to be on a truck like that. Link to comment Share on other sites More sharing options...
NHMJXJ Posted March 16, 2014 Share Posted March 16, 2014 :thumbsup: Jeepman. That's a handsome truck! Link to comment Share on other sites More sharing options...
jbain Posted March 18, 2014 Share Posted March 18, 2014 Took this poser pic over the weekend in IVY.... Link to comment Share on other sites More sharing options...
Zebvance Posted March 18, 2014 Share Posted March 18, 2014 Took this poser pic over the weekend in IVY.... ummmmm...... drool........ :drool: Link to comment Share on other sites More sharing options...
88whitemanche Posted March 18, 2014 Share Posted March 18, 2014 Security cam poser Link to comment Share on other sites More sharing options...
johnny quest Posted March 18, 2014 Share Posted March 18, 2014 Link to comment Share on other sites More sharing options...
Jeepman Posted March 18, 2014 Share Posted March 18, 2014 She is gorgeous. :cheers: First time I've seen Bushwackers? on an MJ that really look good. And the updated front end looks even better with the cowl hood. You got me thinking now. The only thing I'd change is the Fey rear step bumper. It just doesn't look worthy enough to be on a truck like that. Thank You Sir I appreciate the kind words... As for the Fey Bumper I know I Know but it was the only thing available when I needed a Rear Bumper and since I built my custom Hitch around the Bumper just the way a factory hitch would connect so I am not sure I want to build a Custom bumper Just yet, ,maybe for my Next build as I would change a thing or two the next time around... Link to comment Share on other sites More sharing options...
Zebvance Posted March 18, 2014 Share Posted March 18, 2014 She is gorgeous. :cheers: First time I've seen Bushwackers? on an MJ that really look good. And the updated front end looks even better with the cowl hood. You got me thinking now. The only thing I'd change is the Fey rear step bumper. It just doesn't look worthy enough to be on a truck like that.Thank You Sir I appreciate the kind words...As for the Fey Bumper I know I Know but it was the only thing available when I needed a Rear Bumperand since I built my custom Hitch around the Bumper just the way a factory hitch would connect soI am not sure I want to build a Custom bumper Just yet, ,maybe for my Next build as I would change a thingor two the next time around... I see you have 8 inches of lift. Do you have a LP d30 or hp. I'm about to put on a 8 inch lift and worried about my drive shaft angle. I have a LP dana 30. Link to comment Share on other sites More sharing options...
Jeepman Posted March 18, 2014 Share Posted March 18, 2014 Its a Low pinion WJ D30 upfront for my truck... But with the long arm upgrade kit the trans/t-case has been lowered about 2" or so and my only clearance issues is the double carden end of the front driveshaft sometimes makes contact so I have some more trimming to do... Link to comment Share on other sites More sharing options...
Zebvance Posted March 18, 2014 Share Posted March 18, 2014 Do you mean trimming on the crossmember? Do you think you could get away with the angle without the t case drop? Link to comment Share on other sites More sharing options...
Jeepman Posted March 18, 2014 Share Posted March 18, 2014 Yes trimming my cross member and without the drop I am not sure if you can get away with that much angle or not but you can always give it a try and worst case build a drop kit for your cross member or a custom cross member altogether... Any other Questions just PM me so we don't clutter up this thread Link to comment Share on other sites More sharing options...
johnny quest Posted March 18, 2014 Share Posted March 18, 2014 Any other Questions just PM me so we don't clutter up this thread :thumbsup: Link to comment Share on other sites More sharing options...
Pete M Posted March 19, 2014 Share Posted March 19, 2014 or start a new thread :dunno: Link to comment Share on other sites More sharing options...
jimoshel Posted March 19, 2014 Share Posted March 19, 2014 or start a new thread :dunno: That. There are people interested and would like to follow the project. :thumbsup: Link to comment Share on other sites More sharing options...
PEEJ Posted June 26, 2014 Share Posted June 26, 2014 Image Not FoundThis is my 89 swb. 2wd. 4.o 5 speed.Daily driver.Image Not Found Link to comment Share on other sites More sharing options...
ComancheHungry Posted October 27, 2014 Author Share Posted October 27, 2014 Man ive been a way for a while and ive missed all this! I know most of you guys know i didnt have a comanche yet and so while i was away i had my buddy jump on this sweet deal so i got a 2000 cherokee it was listed at $2000 and i wanted it. A 2 door that looked great with only some small surface rust and unfortunately no rockers... But it won my heart so i sent my buddy to get it and see if he could haggle on it and low and behold my buddy haggled him down to $850 i was shocked and awed. But then while i was still away i get a call from him saying he didnt have a ride home from the bar so he decided to drive the jeep home... I think most of you know where i am going with this. He hit a tree... I was devastated and not having the jeep insured or registered i was thankful it wasnt with another car. When i got back i saw the horrible look she gave me and my buddy told me he didnt go to the hospital or anything and that his buddy was driving and seeing my buddy's face imprint on the windshield i asked if he was ok and i then had to reopen his cuts and remove the remaining glass out of his head... Anyways ive been working on it got it running again so now all thats left is cosmetic stuff. I know the anticlimactic part is there a no pictures not yet at least i left my phone in my friend's car so sometime this next week ill have pictures posted so until then give me more stuff to drool over!! -comanchehungry Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now