JENSSEN Posted May 3, 2012 Share Posted May 3, 2012 I have searched high and low on all the sites looking for bed repair panels or new bed sides and they are not listed. I have scavenged a few good bedsides at junk yards but would like new panels or repair panels if available and at a reasonable cost ( gotta support 7 jeeps lol) I know this thread is old but are there still panels or and I saving and going glass bulge fenders Link to comment Share on other sites More sharing options...
jeepcoma Posted May 9, 2012 Share Posted May 9, 2012 I know this thread is old but are there still panels or and I saving and going glass bulge fenders Z&M stopped selling them? Link to comment Share on other sites More sharing options...
JWARNE Posted October 2, 2012 Share Posted October 2, 2012 Wow!!!!! I havent been so excited and then let down like this since childhood. Read through this whole thread and then the second to last post just crushed me!!!! Ok so beyond the bedside panels does Z&M still sell the rockers and floor pans? please tell me they do. I can patch the bed but those rockers and floor pans are critical Link to comment Share on other sites More sharing options...
sinkrun Posted October 3, 2012 Share Posted October 3, 2012 Rockers and floor pans from a cherokee work and can be had most anywhere new. Ebay is a good place to look. Link to comment Share on other sites More sharing options...
JWARNE Posted October 3, 2012 Share Posted October 3, 2012 yeah I have been looking at the rockers off the xj models though these z&m parts just seemed so much more straight forward. thanks for the info sinkrun. I think its just time to bite the bullet and buy myself a donor comanche Link to comment Share on other sites More sharing options...
Casper2000 Posted December 7, 2012 Share Posted December 7, 2012 I just emailed Zack. He still has the parts you just have to email, or call him to order them. I didnt see them on his site either but tried anyway. Sides are still $160 aside, and shipping is about $150- $200 Not to bad ... Link to comment Share on other sites More sharing options...
87MJTIM Posted January 4, 2013 Share Posted January 4, 2013 I ordered and receive one last month. $165 freight shipping to 21740 (MD) Link to comment Share on other sites More sharing options...
Incommando Posted July 9, 2014 Share Posted July 9, 2014 Talked to Zach tonight. He has both sides of the panels and the longer rocker panels in stock. http://stores.zmjeeps.com/rockers-quarters-bed/ Link to comment Share on other sites More sharing options...
pitbull4x4 Posted January 18, 2015 Share Posted January 18, 2015 My bed sides were rusted out. I cut it out at good metal and used front fenders for patch panels. Looks good sorry can't post pictures Link to comment Share on other sites More sharing options...
Sugarfoot Posted March 7, 2015 Share Posted March 7, 2015 If anyone wants to sell the remaining pieces from the PS bed panel from Z&M and they only needed the wheelwell let me know. I need the rear section behind the wheelwell lower half. but will take the full section if you got that too. Or I'll split a PS full panel with someone and cover some of your freight. The closer you are to 78729 Austin TX the better. Anyone traveling from Ohio to Austin? James and Sugarfoot, still around. 88 Red Comanche Pioneer, 4.0 4x4 (stock) Austin TX jed101455@gmail.com Link to comment Share on other sites More sharing options...
Incommando Posted April 23, 2015 Share Posted April 23, 2015 I cut the rust off and used TJ rear flares to cover the larger openings. I also used TJ rear flares on the front to match. I did the cut and fold behind the wheel well. Came out decent Link to comment Share on other sites More sharing options...
pyt0725 Posted October 23, 2015 Share Posted October 23, 2015 hello where can I get this bed quarter panels ,,, my68bird@hotmail.com Link to comment Share on other sites More sharing options...
mikekaz1 Posted October 27, 2015 Share Posted October 27, 2015 2 door Cherokee rear panels work too, just not full length Link to comment Share on other sites More sharing options...
scottie2eyes Posted March 10, 2016 Share Posted March 10, 2016 Just want to revive this old thread for anyone interested. I just got off the phone with Zach from Z & M Jeeps and ordered both bed side panels to be shipped to the body shop I work with in western Maine. $160 per side, plus $175 for shipping. Link to comment Share on other sites More sharing options...
Pete M Posted March 12, 2016 Share Posted March 12, 2016 take lots of pictures and start your own thread! :thumbsup: Link to comment Share on other sites More sharing options...
MJfan94 Posted March 12, 2016 Share Posted March 12, 2016 Does anybody know where to get rear bed corners? Link to comment Share on other sites More sharing options...
coathanger37 Posted July 29, 2016 Share Posted July 29, 2016 Anyone know where to get a good used tailgate or new skin? Also need a new back glass with the rubber weather strip. Link to comment Share on other sites More sharing options...
mikekaz1 Posted August 1, 2016 Share Posted August 1, 2016 Anyone know where to get a good used tailgate or new skin? Also need a new back glass with the rubber weather strip. the junkyard Link to comment Share on other sites More sharing options...
cquinnball Posted November 6, 2018 Share Posted November 6, 2018 Does using the rear fenders of a 97+ 2dr work to patch rear wheel well rot? Or just pre 97? I know someone parting out a 97+ 2dr. Thank you! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now