Jump to content

what did you do to your MJ today?


JeepcoMJ

Recommended Posts

New 235\75r15 tires on TJ chrome wheels.

PO had 215\60r15 on it. Made the speed read 7mph fast. I thought I was getting awesome gas milage at first, then realized the problem!

Speedo fixed, and drives like a different truck.

 

BTW: Goodyear Wranglers 235\75r15s are $70ea at Walmart right now.

 

3193928368985913f2b45212ae6ed132.jpg

Link to comment
Share on other sites

Sitting at the glass shop while they install my tinted sliding rear glass.
We found the rear window glass was not the correct glass for the truck, and was glued in place, not bolted in as it should have been.
Just add it to the list of crap work the PO did!
Much cooler in the cab now!dbf7cab210cfd974c1bb79493b6a02a2.jpg
Link to comment
Share on other sites

Installed my visors to match the headliner, new stickers on the rear glass, and a single ladder rack bar on the roof.
I'm not feeling the ladder bar, so it's not likely I'll keep them. I got them to put one on the roof, and one at the end of the bed to carry my kayak while not losing use of the bed.bc80a2a3822473de41ab1c21f198ef0e.jpg004e696035157f92241da4da356b18cd.jpg

Link to comment
Share on other sites

On 7/14/2018 at 3:49 PM, GreasemonkeySC said:

Grabbed up a camper shell for $40!!!!emoji54.pngemoji857.png

It was nasty, but $5 bottle of cleaner, and $5 at the spray wash did wonders.

The measurements are correct, and it's from a 94 S-10 short bed. Guess we will see how it fits as soon as I pull my toolbox out.

 

f2beb505b2b7712a73d961fe99b04052.jpgeef0238ff52a38cbade8cb27813d29de.jpg

 

My S10 cap is close enough you'd never really know it isn't meant for a MJ...  Unless you really look, then you can see the taper is wrong and the angle at the back of the cab isn't quite right, but for an aftermarket piece it's normal for fitment to not be 100% bang on.

Link to comment
Share on other sites

 
My S10 cap is close enough you'd never really know it isn't meant for a MJ...  Unless you really look, then you can see the taper is wrong and the angle at the back of the cab isn't quite right, but for an aftermarket piece it's normal for fitment to not be 100% bang on.
Yeah, I looked at a few ranger tops, but thought the bed measurements for the S10 were closer to the Comanche.
Link to comment
Share on other sites

Finally finished up the complete re-rewire. Got the taillight harness working correct and after tryimg the weather proof connectors without the right crimper I had to order a set same day from amazon. Keyless entry works now and on weds the infinity 6.5 component speakers and rear 4x6 infinity kappa show up so I can get it put back together and get to working in the fan/shroud setup 95b1932531cc623af7b621ded0ee521f.jpg6304f7ff056e9372fd4f2dc3b96c300d.jpg10a373b4d85da3a04a978787d2262a83.jpg

Sent from my SM-G900V using Tapatalk

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...