fiatslug87

For posterity https://www.hemmings.com/auction/1988-jeep-comanche-hawley-pa-158398/sold

It’s this one And the Hemmings auction https://www.hemmings.com/auction/1988-jeep-comanche-hawley-pa-158398/sold

Congrats and welcome, sounds like you know what you’re doing When you get a chance add it to the registry and someone will provide a build sheet. https://comancheclub.com/forum/32-1989/

Have you tried jumping the fuel pump ballast resistor?

What’s next?

Someone has the itch to go camping.

That's a CLEAN truck!! Looks like it's been repainted. Congrats.

While you’re in there make sure that steering box spacer is intact. It’s against the crossmember.

It looks like a 3/4” long Torx bolt and nut. Might be easier if you remove the skid plate.

I’ve got a set with the bolts. I’ll PM you.

Good to know. Thanks.

On eBay in Greeley, CO asking $10K OBO.

Sorry, I do not.

Interesting that this is a big ton, (G in the 4th position) but the build sheet says it has 3.07 gears.

I think it’s funny that UK spec has a 120mph speedo.

Eagerly awaiting your results.

Better haul some a$$!

Having and selling are two different things.

Didn’t realize I cut off the numbers.

What do you do with an extra NOS chrome MJ bumper (thanks G)? Put it on the MJ trailer of course!!! Also added a step bumper receiver in case I ever want to haul a basket. I made a couple of brackets out of 1/4" steel plate and attached them to the brackets on the trailer and the bumper. Outside view: Inside view: The trailer brackets are 42" apart while the bumper attachment points are 45" apart, so I used 1 1/4" zinc plated perforated square tube spacers on each side making up the 3" disparity (two 1 1/4" spacers and two 1/4" brackets = 3"), there's actually another spacer behind the one in the picture below for the lower rear bolt (it’s poking out in the above pic). It was fun doing this in 105°+ weather the last three days. Now back to the third brake light.

I have these, they fit very well and really keep the temps down. Amazon Coverking link

Should fit the 10 hole Eliminator wheels eBay link

Mill out some Comanches!

Thanks! Interesting, must be an export thing since the 8th position for ‘90 is the engine code, L for a 4.0.