SatiricalHen

Well I’m done with this exhaust leak from the cheap eBay header. Ordered a banks torque tube header and I have plenty of time to put it on since were doing online school and stay at home so once I’m done with this round of tests I should be leak free! Sent from my iPhone using Tapatalk

I like easy to make food and one of my favorites is a breakfast dip. 1lb of sausage 1 block of cream cheese 1 can of rotel -Cook the sausage in a pot, then drain the meat -Add the block of cream cheese and mix till fully melted -drain and add rotel then mix it all together It’s good with Fritos and tortilla chips. You can choose different flavors of sausage and different rotel depending on your taste and how much you like spice. Sent from my iPhone using Tapatalk

Bought more new to me tools and I think these 3 sockets might be the oldest I own now. If I’m not mistaken these are early snap on sockets from the 20s or 30s. Sent from my iPhone using Tapatalk

Picked another one of these up today which reminds me again I still need to fix the front of the frame so I can actually install one of the two. Sent from my iPhone using Tapatalk

I just replaced the steering box spacer on my Cherokee after 5 years of wheeling and I think 3 of those on 35s. Not a single crack. Sent from my iPhone using Tapatalk

I wouldn’t say impossible. Definitely more on the rare side, but not impossible. Figured someone might want a nice leather wrapped grey one and happen to have a black plastic one. I don’t really care for the leather wrapped much myself. I have a black one, but the horn button is on the rougher side and the plastic ring on the back is grey Sent from my iPhone using Tapatalk

I’ve never understood how people are pulling other Comanches or Cherokees with their Comanche. This load I could definitely feel. It was fine going like 45-50 around town, but I’ve tried to pull this trailer down the highway before empty and then drag from the tailgate kills my truck. It’s not happy doing 60-65 and barely can make it to 70-75. It feels quick and strong empty, but it bogs down real quick with loads. Sent from my iPhone using Tapatalk

I thought this was kinda cool. It was on a dump truck at the junkyard and I asked the guy if it was for sale. Gave him $10 and it was mine. Sent from my iPhone using Tapatalk

I got a really nice grey steering wheel that I would like to trade for a black steering wheel. The main thing I need is a good black ring behind the wheel since a wheel I picked up has a grey ring, and a nice horn button. Open to a good condition leather wrapped or a good condition plastic one. Nothing falling apart or sticky. I can get more pictures upon request, but it’s annoying to upload them one at a time from a phone in the app. Sent from my iPhone using Tapatalk

Where are you located? I have a whole short block in SC Sent from my iPhone using Tapatalk

I’m assuming he got one because he stopped replying to the PMs with me. Sent from my iPhone using Tapatalk

I’m missing the piece that slides in the threaded shaft to put the adapters on I believe. I have another ball joint press so I’m not super worried about finding the parts for it right now though. Sent from my iPhone using Tapatalk

These pickle forks are notched which is strange to me. I guess so they don’t slide back out losing forward progress. Sent from my iPhone using Tapatalk

I kept the renix system but used a HO head, a 99+ horseshoe intake, and a HO TB when I rebuilt my motor. There’s info out there and if I can figure it out I’m sure most people can. Sent from my iPhone using Tapatalk

Got the new track bar on a while ago and it was actually super easy which is surprising. Since it’s getting warmer I decided to be lazy and put off the heater core. Instead I washed and waxed it and it looks red again Sent from my iPhone using Tapatalk

Is the AW4 2wd yoke the same as the AX-15 2wd yoke? When I did my BA10 to AX-15 swap I used the yoke from a 2wd AW4 and it seems to work fine. I have a 2wd AX-15 with the yoke sitting in my shed if they’re different and should swap them. I haven’t noticed any weird stuff, but always best to have the correct part even if what you have seems to work. Sent from my iPhone using Tapatalk

I came across some cab vents today in pretty good condition if you still need them. Sent from my iPhone using Tapatalk

Ah alright Sent from my iPhone using Tapatalk

$40 was the number. I feel I did okay on it. I need to figure out what parts I’m missing and if I can get them for the ball joint press. Sent from my iPhone using Tapatalk

Interesting. I’ve never needed to use one before, but now I have one if I need it for some reason. Sent from my iPhone using Tapatalk

Is the wheel to score, then the notches to grab it and break it? Sent from my iPhone using Tapatalk

I bought a tool lot today. I’m not sure what the first tool picture is, and thought maybe one if you would know. Looks like some kind of scoring wheel. The other photos show some of the other stuff. Part of a 3 drawer craftsman set, part of a smaller craftsman set, part of a Stanley set, a diesel compression set, a 12v snap on charger (not sure how to tell if it works or not as I don’t own any snap on battery tools), a pickle fork set which I’m not entirely sure the brand, a puller, and a snap on ball joint press which I believe is missing some stuff. Everything looks like it came from the bottom of the lake so I need to figure out a way to remove some rust on them. So anyone know what the first tool is, or have any suggestions or comments about the rest. Any guesses on the purchase price of the lot? Sent from my iPhone using Tapatalk

Yes I had used my cable. With a 3’ firestik it’s well under 3 on the meter. I think with a 4’ it would get more over the roofline and get it lower, but I’m not going to burn up the radio so I think it’ll be okay. Sent from my iPhone using Tapatalk

I have a factory 3 pane slider Sent from my iPhone using Tapatalk

They can be repaired, the see I had were real bad, but I redid them. Sent from my iPhone using Tapatalk