MeanLemons

Responded.

That ll be much appreciated!

There’s a rubber plug on the side of the housing. Remove that and you will see the roll pin. I used #1 extractor to pull it out.

A nova is a waste.

Did that break? You can have it welded.

Or do what I do. Delete the radio and related accessories.

That’s correct sir. U are good to go.

I have the bed mat on my 88 MJ. It says Comanche and have a mopar sticker on the inside. I ll take a pic tomorrow

Yes. Center of u joint on the slip yoke to the center of u joint on the axle. Although I currently have a 8.25 on it, I still used the same driveshaft from when it had the d35 on it.

It’s 59.5” long

It’s currently raining outside. I will measure my 88 MJ with 4.0L and 2wd AW4 & D35.

Haha that made me laugh

Hello y’all. I think I never mentioned it here but I have been boring out throttle bodies (91 and up) for years. To remove the bottle neck at the bottom of the throttle body (60mm). Last night I successfully made a jig to hold the throttle body so I can bore all way through to 62mm. With the new butter fly plate on. $80 shipped for the 60mm throttle body (core fee of $20 included). $120 shipped for the 62mm throttle body (core return of $20 included). i will start taking orders when the first batch of butterfly plates arrive and they all measure & match up to the prototype I have. I havent started doing renix TBs yet because I don’t have a core to play around with.

Lmao

No I’m just saying that he made panels to use Toyota switches, TJ switches etc. however with using our oem panels, I have no idea. Sorry I’m not much help with that

https://www.shapeways.com/shops/gctent

One guy came up to me at a gas station. He asked how much for the truck. I just said it’s more than what you can afford. He stared at me in disbelief. He was dressed nicely in a suit (think white collar) and was driving a bmw. I laughed as I walked away

2.4?

Intake air temp sensors but there’s thread here on using a replacement from a gm vehicle. (I bought one of them along with the pigtail.

I made a pinion toke holder for setting up gears, and bunch of other stuff. I ll have to take pictures next time I see them. about that homemade vise. Genius! I think I ll make one of my own as well

Congratulations!

Yeah pop them off with an air chisel and use tape/wrench.

Very nice work!

Had my axles regeared and picked up another tailgate. Also loosely assembled the parts on the rear axle just to see how to see how it looks. Seems like I like it. So I’m gonna give it another coat of paint and fully assemble it. gonna need to order wheel bearings/seals, brakes & hardware, and then hard lines.