Strokermjcomanche

I used auto transport direct to ship a non running MJ from Colorado to Ohio and it was $634 . This was in 2014 / 2015 iirc , not sure what prices are now . Took me about a week to see it .

Those floors are toast

It is

I'm not sure if this would help , I have an original sending unit if they need something better to reference off of .

Good job , I love the team name lol . I've had a lot of close to perfect games , but only really wanted to bowl 300 once . If I get more great , but I'm definitely not a pro bowler lol. Been bowling a long time?

Time to update this thread , second week of this season... IMG_1224.mov

Iirc I paid $80 for the XJ seats and re used the buckets that were already in the truck .

So do you just need an emblem to copy and then you can send me my original one back . Any damage that can potentially happen to my original? I have a couple NOS Metric Ton that you can possibly use , but I paid good money for them and don't want them damaged . I think i have every badge except for the X if that helps .

Yes , I swapped the limited covers on 2 door seat frames

This one ? https://www.ebay.com/itm/Jeep-CJ5-CJ6-CJ7-CJ8-Laredo-Black-Steering-Wheel-OEM-NOS-In-Original-Wrap/223658066847?hash=item34130f439f:g:7gQAAOSwmwhddtjk

I used athe external clutch /slave cylinder from a 95/96 XJ , it mounts to the firewall and transmission correctly.

It does have black dash , the one picture was taken before I switched it to black from gray .

TJ pressure plate

Oriellys brand , blue and black packaging. Used the renix cranks sensor , not cam sensor

I used the ba10 flywheel. I used the ax15 mount didnt modify the console , but the TJ shifter light presses on the console in the 2,4, and reverse gears . I'm almost confident the XJ shifter wouldn't touch at all . Other than possibly the shifter, nothing

I have a 02 TJ nv3550 in my 88 MJ if you have any questions. I used the ax15 crossmember and Novak 4wd linkage and didn't clearance the floor pan or clock the tcase . I used the 02 clutch and pilot bearing with no issues , iirc my tcase is from a 95 XJ . I used the tj shifter which sits pretty high , I like it but also trying to find the correct XJ shifter also played a big role to use the TJ shifter .

.

Second that !! I'd be interested in chrome too !!

Maybe I wasn't clear in my first post . I'm not saying to use the entire winch just the end piece you're looking for . Here's a picture of an s-10 winch you can harvest the end piece off of and the Comanche winch side by side to show what difference there is

Pretty much any tire winch will have that same piece , go to a junkyard if you have one and look until you find one that will go through the center hole of the wheel you are using

It was good meeting you too Dennis except for the pain I was in lol . It was a good time going through someone's collection again too , hope to see you in person again next year .

Something like this .. https://www.google.com/shopping/product/13286896467558344800?q=flex+shaft+phillips+screwdriver&client=safari&hl=en-us&biw=375&bih=559&tbs=vw:l,ss:44&prmd=sivn&prds=epd:14550712870063922774,paur:ClkAsKraXxLpbz0a-N7RIRURl2Y9Kmrn-tExtAQolCLORW05XIss17FopnRf_wKFARlrcpr1aIZNL9B2mG3ffbOScfITH7uFZmwzrCNzUj8OK0i6pdTA3O2XTRIZAFPVH72W0VJJb6Wj6VPPw2J1vESys2w_jw,cdl:1,prmr:1,cs:1

I have a flex shaft screwdriver that I use for those philips screws , works like a dream . I