Strokermjcomanche

Any updates?

You'll be driving pretty close to my house on that route

The interior is all back in, the rear seats were pretty cut up and I replaced those with some better shape originals.I was going to replace the front seats with some Katskin leather covers that I have, but the shade is off a bit. So I found some rough country seat covers to put on for now. Also fixed blower motor resistor and clean the whole interior while it was all part. located a parts XJ that was the same color and swapped the faded out flares for ones that had better paint. Also swap the hood and header panel for the same reason. Surprisingly enough, the air works as well. Took it for a test drive and I left Front wheel was hanging up. So I put new calipers and hoses on and all is good now . I was thinking about painting the roof being it's faded and all, but for the time being I don't wanna do it. I may in the future if it doesn't sell, which is what I'm trying to do now.

I'm interested in going, depending on it if I have to work or not and how the weather is. If I do go I will bring an MJ , either my black one or my white one.

Thank you everyone for the replies, makes me feel better about purchasing. Thanks again

If it helps , the item is in Kanagawa prefecture.

I have the right Link now. my apologies

I'm looking to buy something, and wanting to know if anybody has used a proxy buying service. I'm a little bit nervous due to the price of the item I want to purchase, which is why I'm asking if anybody has used one. Here's a link to buyee https://buyee.jp/beforeLogin/cart

I might go. Not sure if I'll be working, and probably won't be sure until the week of. It's roughly a 4 hour ride for me, and if the weather is good and I'm not working I'll probably go. just wondering if it's worth compiling a list of who all is going just to see how many people are going to be there from the cc

I'd be interested in a spare tire winch if you have any spares to sell

99 XJ block new std crank king bearings new pushrods new std dome pistons edelbrock 50169 loaded head double roller timing set custom cut boost cam Harland sharp roller rockers ARP head bolts ARP manifold bolts with newcomer wing washers newcomer racing copper gasket MLS Felpro head gasket permadry oil pan gasket NR fuel rail aem 340lph fuel pump installed in Delphi fg1076 sender (might buy the boostwerks sender though ) . Sprintex XJ S/c kit I purchased from Alexia also purchasing the newcomer racing thermostat housing . also working on fuel management and injectors

Wow! I really dropped the ball on this thread. So I had 167,000 miles on it when I purchased it, now I'm at 215,000. I didn't take any pictures when I did the rest of this. I installed new leaf springs, shocks, magna flow exhaust, and it has basically been trouble free even to this day. Had a little mishap at work three weeks ago, they were spraying some safety yellow several places close to where I park and got yellow paint all over my Cherokee. I spent several days removing the yellow paint off of everything, what a feat that was. A combination of Clay-bar, buffing ,having to take my roof rack off and re-spraying it black, another set of mirrors. Now I have it all taken off , they say they will never spray yellow paint again lol. So here's the reason I'm updating the thread, so far I've got about a year of collecting parts. Need to collect parts for the fuel management and I'll be ready to install it . I carry tools with me and it has become a bit anemic and tired.

It looks like a bump stop for the hatch or one of the doors. Probably got bumped off at some point in time

Smokey and the Bandit need for speed

m10x1.5 flat top torx head bolts . also put the link to my thread in case you need anything else. Your local ace should have something similar

I want it , I don't know what it is .... but I want it lol.

I'm definitely interested depending on price and shipping etc.

I have a couple labels I've done over the years . I bought some of his labels as well, While they are OK in quality, they aren't a perfect match. I've done the emissions labels for an 88 and also the fill procedure for the expansion tank.

Normally that would be a DRB hook up . I would try your rem and see what it does. May not be 100% exact, but it'll probably still give you readings

Check your fuel pressure. Also check all your vacuum connections, especially the map hose . make sure you do the stuff that doesn't cost any money first, then go from there.

I'd be interested too

I don't , they are normally on eBay for sale iirc

This stuff works well, the link is just a example . i'm sure you can buy less for a better price quantity https://www.amazon.com/Wreck-Wrap-Self-Adhering-Collision/dp/B01EGCEA1M

When are you coming back Pete ? Lol