MiNi Beast

If all goes well i ll be in mj driving, or else ill be tow dollied in with the jk. Fingers crossed 🤞

3 to go, one for backwards, lets not forget overdrive. Bahhaa haa 👌

Well with the locker in you would still have use of 3 wheels. Look into the difference in lockers a bit.

Disconnect axle other wise will need to install live axle hubs to replace unit bearings or air or cable selectable locker. One down side to lunchbox lockers with d30s. Tire movement 9 to 3 a little but a means to check steering. 12 to 6 movement for bearings or ball joints 🤔 look close for wear or if bearing is hoter then should be...

Stroked with 3 on the tree, nice.

Indeed. Irish be in my blood.

When in doubt, bust the welder out. Aint got no welder, then bolt that shot together and run it.

Thinking today has good things in store.

Which you have with a core 4x4 trac bar setup. Make your adjustments and run it. Jb weld a washer to make eagle feel better.

Drill a new hole 1/2" to the right and well run it.

Best thing about all new is its all new. Makes sense to install new if going to be driving it for a bit. Then you know where you stand, and before long you'll be driving a brand new jeep and still be cheaper then buying any new vehicle today. 🤪

I like the coin myself.

Expensive taste.

No worries mate, soon to be on the map!!

Oh man. Another epic build 😎

La de da. Road trip soon gents. 🤪

yeah something just like that.

Thanks for the update. Maybe get a chance to list parts for the new engine setup? I recognize some but you know other people may not know what their looking at.

I'm assuming but only thing i seen oddly was the rear load sensing valve for adjusting brake pressure in the rear per your loading weight.

Nice buy. yeah you have a good understanding about these suspension issues, so your just going to have to go through it for sure. Tackle them as they present has done me mostly good. Was it simple enough with the trim? I'm looking to have a new one installed myself and was determining on the newer style with rubber seal.

Sweetness. Was a sweet build, good to see parts get reused.

Thanks. I APPRECIATE YOUR acknowledgement.

Peterbuilt

I disagree with you here. proper mixture is important to overheating issues.

2x4 steel stock, some mounting plates, and a 2" receiver. Weld it up pretty