Jump to content

HOrnbrod

Moderators
 View Profile  See their activity

  • Posts

    20174

  • Joined

  • Last visited

  • Days Won

    28

 Content Type 

Everything posted by HOrnbrod

  1. HOrnbrod
    No, uses the same fuses. I see you swapped the original cluster back in and it works, so there must be something wrong with the gauge cluster.
  2. HOrnbrod
  3. HOrnbrod
    If all your fuses are good, inspect the circuit flex-foil on the back of the cluster for tears and/or broken solder joints, especially where the connections are made to the cable connectors.
  4. HOrnbrod
    I didn't cut them, and have zero oil in the filter. Going to the 94 and up CCV system with the larger hoses and keeping the vent towers intact as originally designed made better sense to me.
  5. HOrnbrod
    The one that you hack off the interior vents? Why do that?
  6. HOrnbrod
    88whitemanche recently installed an AMC20 in his rig as I recall. Maybe he'll chime in..........
  7. HOrnbrod
    Maybe. I know if you're going from a D35 to D44, yes, too long, but maybe not for the AMC20? Also the pinion yoke on the 20 used either a 1310 or 1350 series u-joint depending on application. Don't know which one was used for the 86 MJs w. the AMC20.
  8. HOrnbrod
    I'm sure there's a way to convert the AMC20 to disks other than an expensive aftermarket kit, like the SSBC one. And you'll have time to find it after you bolt it in and use the drums along with the D30 with the right ratios. It's a good sensible move.
  9. HOrnbrod
    THIS conversion looks pretty easy, and cheap too. But I haven't done it........
  10. HOrnbrod
    Blasé maximus. Looks like a white hollow block with a cab and wheels.
  11. HOrnbrod
  12. HOrnbrod
    https://comancheclub.com/forums/topic/22802-b-pillar-light-alternative/ https://comancheclub.com/forums/topic/5623-porsche-911912-interior-lights/
  13. HOrnbrod
    No. Dielectric grease is non-conductive and should never be used on electrical contacts. It's purpose is to protect electrical connections and wiring from salt, dirt and corrosion from the outside, like on a spark plug boot.
  14. HOrnbrod
    The reflections make it look like the rear of the pan is all dented up.
  15. HOrnbrod
    I think all the Pioneers got body side molding as part of the factory package. It was all black though. Your's may have fallen by the wayside over the years.....
  16. HOrnbrod
    I was ragging Pete, not you papa.
  17. HOrnbrod
    Did you find that pan lying on the side of I95?
  18. HOrnbrod
    You call it "the clean look", I call it dull. This Renix Elim looks nice.
  19. HOrnbrod
    Body Side Molding Cutter
  20. HOrnbrod
    ^^ This is true. My body side molding is a mix-mix from various XJs and MJs. The chrome center strip (gotta have that) is aftermarket 5/8" half round.
  21. HOrnbrod
    True. But the 2WD driveshaft has that stupid rubber sheath around it that deteriorates over time and causes vibrations sooner or later. You will need to replace it one day with a new shaft. It's best to do it at the same time you lift it.
  22. HOrnbrod
    Are you selling these tail lights? If so, list them with pricing in the For Sale section. If you are giving them away for free, you're fine.
  23. HOrnbrod
    Looks like the coral snake is mating with a blue racer now.
  24. HOrnbrod
    x2
  25. HOrnbrod
    Did you get rid of the coral snake?
×
×
  • Create New...